My print feature in safari on my I pad has stopped connecting to my printer. Everything else connects no problem

My print feature in safari on my I pad has stopped connecting to my printer. Everything else connects no problem

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
AirPrint Setup and Troubleshooting
How to print from your new iPad using AirPrint
AirPrint Basics
 Cheers, Tom

Similar Messages

  • Every time I log onto my iMac profile it starts Safari immediately trying to load a blank anyone else having this problem the last day or two?

    Every time I log onto my iMac profile it starts Safari immediately trying to load a blank anyone else having this problem the last day or two?

    Go to: Safari Preferences... and select the General tab.
    1. Check to make sure that "New windows open with: Homepage"
    2. Then if it still opens blank...? Select the Homepage page that you want Safari to open on and click the "Set to Current Page" button.

  • Plug-in container has stopped working. No printing from web

    Went to print a receipt from a web page and got firefox 'not responding'. Then error message after I click to close..."plug-in container has stopped working". I have reset ff, i have uninstalled and reinstalled. flash is up to date. I have EWPS plug in (I have an epson printer) and E web page plug in.
    When I checked in my pc for the ewps, it doesn't open but says it needs plug in container and to re download e-web print. did that. No better.
    Not an epson issue as other stuff prints.
    Please help

    I'm trying to figure out what plugin(s) the problem page is using.
    Are there other pages on the site (same host name, e.g., that do not lock up Firefox? If so, please open one of those pages and then switch all the plugins to "Ask to Activate" for the site. Here's what I mean:
    Click the padlock or globe in the address bar and then click "More Information". At the top of the Page Info dialog, click Permissions. Then, in the plugins section, click "Always Ask" for each one and close the dialog.
    The next time you visit the problem page, Firefox should show a bar telling you which plugin needs to be activated. Actually, this might not kick in until after you exit and start Firefox up again.

  • I have a Mac OS X 10.8.4 and Safari 6.0.5 it has stopped downloading any suggestions?

    I have a Mac OS X 10.8.4 and Safari 6.0.5 it has been working beautifully but suddenly freezes when I try to download anything. I am looking for fixes, any suggestions appreciated.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.

  • Print feature in safari for iPhone 4 and 4.2 OS

    How do you get Safari to find your network printers on iPhone 4 with the 4.2 OS

    And there are very few printers that are compatible. A list of them can be found here.

  • Mac has stopped recognising canon mp600 printer

    After 2 months of working without a problem, my imac kept telling my printer canon mp 600 was offline. 
    Foolishly thought I should try to reinstall and deleted it. Now despite using original disc an downloading drivers still cannot get mac to install printer.  help

    You could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or right click on a printer on the left (or in the space where printers are normally listed) and select 'reset printing system'. Any printers listed will need to be added again.

  • Am using Windows XP professional with FFox 4 beta. Every time I try to print a web page as a pdf I get random letters & digits displayed, is anyone else having this problem, is there a solution to rectify this problem?

    This problem only occurred with Ffox 4 beta printing web pages as PDF files on previous versions of Ffox has never been a problem...
    The web pages appear to lose formatting when displayed or "printed" as a PDF file, randomly placed letters and digits appear all over the page.

    Caused by a Bug in 4.0b12. Fixed for the 4.0RC version due to be released this week.
    File > Print Preview <br />
    Try printing from the Print Preview window, using the Print button there.

  • My iMac has stopped being able to access the Internet using safari, firefox or goggle chrome.  Skype and downloads working fine..... Just all of a sudden, browsing was stopped.... Everything else on wifi system is fine... I

    I am running version 10.8.3 on mountain lion, and I'm sure it has something to do with bathe network settings, but have no idea how to fix it.... Everything has been set on automatic, but now doesn't seem to work.
    I'm confused.... iPad, iPhone, works just fine on wifi... Just the browsing on iMac

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem.  Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HP Smart Web Printing feature, problem with IE7 and FireFox3

    "HP Smart Web Printing" problem with Internet Explorer 7 and FireFox 3I have a laptop that came with: Windows Vista Home Premium, Internet Explorer 7, FireFox 1.9. Everything worked fine.
    Recently I bought a "HP Photosmart C4580 All-in-One" printer that came with a free software "HP Smart Web Printing".
    Smart Web Printing worked fine with FireFox 1.9 browser. I liked it very much, because with it, I could print only the portions from the web page that I want, thus saving on inks. It really does more than that.
    With IE 7, Smart Web Printing was a disaster. IE 7 stopped working. Every time I closed a web browser window, IE7 would stop working and start all over again. It happened all the time.
    On suggestion from Microsoft Windows help desk I "Reset IE Setting". This solved the IE 7 problem , but it also removed the Smart Web Printing feature.
    Next, one day I downloaded latest version of FireFox browser "FireFox 3". Once again I lost the Smart Web Printing Feature, because it was not compatible with FireFox 3.
     Now here I am with no "Smart Web Printing" feature at all.
     Any suggestion how can I get "Smart Web Printing" feature back. I love the feature

    March 27th 2009 I've just downloaded HP Smart Web Print onto an HP a6500f desktop system running Vista-64.  I first installed it as a limited user and I get no icon in the IE7 taskbar.  I examined the manage add-ons dialog and it was installed but the toolbar configuration has no control icon for SWP icon.
    Then I logged off and logged on as a privileged user and downloaded again and tried to install.  This 2nd installation actually REMOVED my first installation.
    So I then downloaded for a third time and installed and it finished installing but there was no SWP icon in the tool bar.  I examined the Manage Add-Ons dialog and saw one in there on the left side.  I transfered the inactive icon to the active side of the dialog and then I immediately had TWO SWP icons in the task bar. (*mumble grumble*).  So I removed one and all is OK now as long as I use the IE7 as a privileged user. 
    If I go back to being a limited user (not an unreasonable thing to do is it?) I don't have an SWP icon.  Trying to install SWP application again only cause it to want to remove the existing installation.
    I'm not very impressed with this behavior. 
    Is there anything that can be done to get SWP to work for limited users?

  • Printer Features Available using Airport Express

    I just purchased an AirPort Express to use with my HP PSC 1350 All-in-one printer. The question I have is will the scan function work when the printer is connected to the AX? In other words, can I scan a document and have it saved on my MacBook wirelessly?
    Thanks for any help or suggestions you are able to provide.
    MacBook   Mac OS X (10.4.8)  

    If you connect a printer via the ethernet port of the Express, all printer features should be available. Now, are there any all-in-one printer/scanner that allows connection via ethernet port, I don't know.

  • HP CUE-Scanni​ng Flow Component has stopped working on printer settings

    When i click Printer Settings or when i am done with scan and need to send it to printer i got: HP CUE-Scanning Flow Component has stopped working error. Specifications of system are below.
    OS: Windows 7
    Scanner: HP ScanJet G2400 (System saying: G2410 )
    Printer: HP LaserJet 1010 USB ( Drivers for Win XP by reccomendation from this forum, not my post )
    Solution Center Ver:
    I belliwe error is printer driver, and dont say to switch to Vista drivers, TOO buggy.
    This question was solved.
    View Solution.

    Hello ArsenArsen,
    Welcome to the HP Forums!
    I understand your concerns. Unfortunately, for this Scanjet and this Laserjet printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
    Good luck.
    I worked on behalf of HP.

  • Can the message, this document has been sent to the printer be turned off?

    I have the Officejet Pro 8500A
    When ever I send a document to print I get a message that the doc has been sent to the printer, I also use PDF creator and get the same message. Can this be turned off?

    You should be able to turn this off. Here are some steps to try.
    1.Right-click the Windows taskbar, and then click Properties.
    2.Click the Taskbar tab. 
    3.Under Notification area, make sure the Hide inactive icons check box is selected, and click > Customize. > 4.Under Current items, make sure the Printer icon is set to Always hide. Then click OK two times. > 
    Let us know if this helps, Thanks !
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • How do I check if my air print feature is on?

    I'm trying to hook up new printer but won't work. How do I verify my IPad's air print feature is on. My husband printed photo from IPad, but I can't seem to get emails to print. Where in Settings can I verify printer is connected?  Any ideas what we're doing wrong? Help?! Thanks.

    Here's the AirPrint overview article:
    AirPrint basics
    First, be sure your specific model printer is listed there as being supported by AirPrint.
    There is no specific place to check -- there is no AirPrint app.  You cannot check in Settings.  The best way to check is to try to print from some app (Mail would be fine, but you could try, say, Safari instead), and see if your printer shows up.
    The article should be your best help.

  • Safari 5.1.7, OSX 10.7.4, can't print from safari but ok w/other apps

    I recently upgraded the Safari program as well as the OSX update.
    Now the Safari print dialog displays "No Printer Selected" and will not allow a printer to be selected. I do get a PDE error that says that the AdobePDFPDE800 bundle isn't working. But I've no clue how to access and delete it.
    I had also upgraded Adobe reader from 8.0 to Adobe Reader X and removed Reader 8 by dragging it to the trash.
    The printer is a Ricoh Aficio CL4000DN. PPD's have been reinstalled today.
    The is NO PROBLEM printing from any other application. All Apple aplications other than Safari print as well as applications from other companies.
    Any suggestions?

    The is NO PROBLEM printing from any other application.
    Good to know. Narrows down the troubleshooting.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:   /Library/Internet Plug-Ins
    Click Go
    Move the Adobe PDF browser (or just PDF browser) plugin to the Trash.
    Now open System Preferences > Print & Scan > Print
    If you don't see your printer on the left click + (plus). You may need to click the lock icon bottom left corner of the Print pane to make changes.
    Now click:  Open Print Queue
    Delete any times in the queue.
    Quit then relaunch Safari. Try printing...
    edited by:  cs

  • Only headers and footers appear attempting to print PDFs in Safari 5.0.2

    I am a Mac user trying to help my friend, who uses Safari 5.0.2 on his PC. He can open PDFs within Safari, but when he attempts to print them, all that appears are headers and footers (same thing appears in Print Preview).
    Any suggestions?

    One thing that might be worth a try is uninstalling and then reinstalling his Adobe Reader, Don. (The theory is that that should swap out the nppdf32.dll file governing the Adobe PDF plugin used by Safari.)
    Any better printing performance following the Reader reinstall?

Maybe you are looking for

  • How to print PreparedStatment object in console

    Dear All i am using PreparedStatment for inserting data into a table, in my local system it is working fine, but after deploying in JBoss(Server) it is throwing "invalid column type" error. In order to check i tried to print in the JBoss console but

  • How to find cause of "File cannot be found" in sync iphoto to iphone in itunes?

    Hi can anyone help with syncing iPhoto to iPhone ?     I know similar posts exist on this subject but I have spent 4 days reading them and every support article even vaguely related to it but have not found a solution that works for me.   I have down

  • On My Mac?  Folder/ Mailboxes not showing up

    I am trying to create "folders" to move emails from my inbox to individual "folders". I created smart mail boxes but if I delete the email out of the regular inbox then it deletes it out of the smart box. I then tried move and email to ON MY MAC and

  • Framemaker and C#

    Hello, I have a C# windows application that interacts with the database and does some processing. Is it possible to invoke this application from within frame? Also, is it possible to pass the data back to Frame from this application (eg. on click on

  • F110 exit's or BTE's for proposal and payment event

    Hi experts, I've allready searched on the forum about this topic but havent found anything that could help me... What i need is some exit's or BTE's, i rather BTE's, for payment program, in  proposal event and payment. I've found event 2110 but after