My printer can not connect to WiFi if there are two or more APs with same SSID

I tried to connect my printer to WiFi but failed.
My network has more than 2 WiFi APs and all the APs have the same SSID and security settings.
I found that the printer can connect to WiFi only if I left one AP on and turn all other APs off.
Other devices like notebooks, smartphones all works fine with these APs.
Any solution to solve this problem?

No, I gave you a solution to try, you rejected it. BTW using channel 3, it is getting clobbered by all APs on channel 1 and channel 6. If you use channel 1, you only have other APs on channel 1 to contend with. That's why you should only use channels 1, 6 or 11 on the 2.4GHz band.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Iphone 4s can not connect to wifi

I have an iphone 4s can not connected to wifi even it was working the day before problem.

Power off your phone, unplug the router and modem for 2-3 minutes, then plug them back in, power your phone on, and try to reconnect.

IPhone can not connect to wifi

Since I downloaded IOS 7 to my iphone 4S, my battery life is greatly diminished and I can not connect to wifi. I reset my systems, but still the wifi button is grayed out. Suggestions ?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

I can not connect to wifi using iphone 4s

I can not connect to wifi using iphone 4s

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

HT1688 Iphone 4 will not connect to wifi, and there is NO password on it, i have reset network connections, and it wont connect. I click other and typed the name of the wifi in and it will not work, what do i do.

I phone 4 will not connect to wifi, and there is no password, i have tried and tried and nothing works, also the lock button doesnt work, i bought off from someone on facebook and now it will not connect to the wifi, PLEASE HELP

http://support.apple.com/kb/TS1398

Access Connections - Many APs with same SSID (Again)

I have a W520 running Access Connections 6.11 (release December 2013) on Windows 7 Pro 64-bit. Access Connections is still broken in regards to dealing with multiple Access Ponts having the same SSID. It keeps hoping from one access point to another regardless of signal strength of the AP.
The most desirable strategy would be if Access Connections would find and lock on to the best signal strength AP and stay there. However, it doesn't do that. It acts almost randomly. It also keep shifting around. The rate is almost random as well. Sometimes it will stay locked on to an AP for up to 10 minutes, at other times it shifts in as little as 30 seconds.
Other laptops, from other manufacturers like HP, Toshiba, and Apple do NOT exhibit this behavior on our campus. Other Lenovo machines running Access Connections DO exhibit this behavior. The problem is NOT machine specific (ie, not hardware or some weird idiosyncracy of the particular W520 i'm posting about). The problem is Lenovo's Access Connections. The problem is also not a configuration issue with the campus. I have a network at home running Airport Extremes all having the same SSID's and the W520 in question does exactly the same behavior there. Totally different hardware at home vs campus and same behavior. I cannot change the names of the AP as a fix. This is not a capability in the configuration of the AP's. Even if it were, I shouldn't have to do it. Campuses are often configured in this way. Campuses that are large commercial users who I believe are the most lucrative Lenovo customers.
This problem has been going on for literally years with different versions of Access Connections. Here are two threads in the Lenovo Community I found in under 30 seconds. Neither was solved correctly. In other words, Lenovo never fixed the software, and people had to either give up or resort to kludge solutions in their campus configurations.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Is-it-possible-to-default-to-a-specific-Access...
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Access-Connections-Many-APs-with-same-SSID/m-p...
Lenovo has actually made the problem progressively worse over time instead of fixing it. They have done this by removing the abilty to prioritize AP's by MAC address. Initially, Lenovo allowed you to configure 5 MAC addresses in order. Then, Lenovo removed that capability making it possible to only give a single MAC address as preferred. Finally, in recent iterations, Lenovo removed that capability alltogether. The box is still there in the UI, but it's greyed out. It is very frustrating to have this kind of thing happen. The prioritize capability is fundamentally a kludge, but at least it's something to give a bit of a workaround. Now we don't even have that.
Can a lenovo engineer please look at this issue and give me a timeline for resolution?
BTW, It is still not possible to configure Access Connections with a blank SSID either. I bring this up, because if you're going to fix the Access Connections code for multiple SSID's, you should be aware of the blank SSID problem as well. I imagine they are both in the same part of the Access Connections codebase, at least from a logical standpoint.
Thank you.

I found that there is a setting in the Intel driver (15.9.1.2, released 8/22/2013) for the wireless card (Centrino Advanced-N 6205). The setting adjusts the "roaming aggressiveness". I can only guess this means how often the driver goes out and tries to find a "better" signal and/or bandwidth. The card supports a/b/g so the calculus is complex as to what constitutes "better", and I have no idea how sophisticated the algorithm the driver uses is.
That said, if I set the "aggressiveness" to the most aggressive setting, things work somewhat better. They are still not as a good as other wifi managers bundled with competing products (specifically HP, Toshiba, and Apple so far), but it helps. It does appear that more of the time now, the AP having the best signal appears to be the AP the laptop is attached to.
Lenovo, please consider that forcing your customers to dig around in arcane driver settings and relying on the whims of driver writers and hardware companies to do things correctly and well, is a recipe for failure. Your customers are just going to get annoyed and say to their colleagues, "My old Toshiba seemed to do a better job of WiFi connections. I think next time, I'm going to have IT get me one of those again." And, of course, that colleague will look a lot harder at buying the Toshiba instead of the Lenovo, as well. Wifi connectivity is a very big deal for people who have to move around - and lets not forget, this is a laptop we're talking about, which is explicitly designed to, well, be moved around.
I apologize for being so pedantic, but it often takes such measures to get managers in these companies who control programmer time, to take these issues seriously and allocate the programmer resources to fix these problems.
The problem I am having is still not considered "fixed." I would very much like to hear any other solutions that work better. I would love to hear from Lenovo on the matter. Still waiting.
Thanks.

After updating to 10.8.1 i can not connect to wifi no hardware installed , it says

When I installed the update to 10.8.1 there comes a message that there was a problem by installing.
Now i can not connect to a wifi network, when i click on the wifi at the bottom
No hardware is installed
Why is there no hardware installed?
Under 10.7 all was fine

I have MacBook unibody late 2008 with OS X Mountain Lion on board. Wifi stopped working suddenly and I spent about four terrible hours to solve a problem.
Actually, none of mentioned and googled advices helped me out to solve this issue with 'WiFi: No Hardware installed'.
Except one thing: using the wifi kext from the Snow Leopard. You may use utility and kext from here: http://rys.sommefeldt.com/2011/09/04/osx-lion-wifi.html
I hope, this can help.

I can not connect to wifi with router WRT54G2 v1 with Windows 7

Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi.
I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.
I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.
I Try chatting with Cisco support and was told he was no longer under warranty ....
Can you tell me how to solve this problem ???
Thank you for your help !!!
Solved!
Go to Solution.

Sure, disable security on the router completely for now. Now try to connect with no security. Once done and verified go back and add security back on of WPA2-AES with a new password and try again.

Can not connect to wifi to configure

I can not connect to home wifi to configure.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Can not connect to wifi-network

I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
and I have no dial tone when I call. what can I do?

Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

Can not connect to WiFi on iMac... just started

I have a preferred network t hat all of a sudden I can not connect to on my iMac. The network diagnostics does not even bring up the list of networks. I have 2 other laptops, an iPod touch and another iMac on the network using wi-fi and they are all fine. If Network Diagnostics does not work...how do I troubleshoot?

I would turn Airport off and then turn it back on. You should see your network and be able to log back in. There's also been a number of OS X updates - you might want to get your system up to date as there have been multiple Airport updates.
The other thing you might want to try is resetting (power-cycling) your router.

P1102w can not connect to WiFi router

I change my wifi router and my printer can't connet to new router.I try to connet by usb port and i get error (See Pic) and i press next this error coming again. yes i reconnect usb and try again some times i chang usb cable. It 's same error. idon't know why?
Please help me for my problem. now i can not work.
sorry for my english.

Sounds like you are having an issue configuring your new printer with your new router. Can you tell me more information about the router? Make and model for instance.
Are you attempting to perform the USB >> Wireless conversion through our software? If you are, is your computer connected to the network in question?
Here is information additionally to help you get this connected :
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=50885&tmp_task=solveCategory&cc=us&d...
Let me know and I will get back with you as soon as I can!
Have a wonderful day!

Can not connect to WiFI with IPAD. Any tips?

Any tips on how to connect to WiFi. The IPAD does not find WiFI. I know that is working as I currently have 3 other devices using currently.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT201210 my 4S can not connect to wifi

how can I resolve my 4S not able to connect to the WiFi? Restored the software and settings and still does not connect
Thanks in advance

connect in recovery mode.
http://support.apple.com/kb/HT1808

Can not connect to WiFi on my iphone.

Hello, at my work i usually get wifi on my iphone until today. when i try to go to webpage it says safari can not open the page. you are not connected to internet. but when i turned off the wifi i can go to website.i reset the network and then typed the wifi password. but issues remained the same. i am not sure what is causing the problem. any help will be appreciated. thank you

Try rebooting the WiFi router by turning it off or unplugging it for 30 seconds.

My printer can not connect to WiFi if there are two or more APs with same SSID

Similar Messages

Maybe you are looking for