My printer does not print pdf files

All my word doc print fine, just seems to be PDF files.

Hi, MsFran.
Have you ever fixed your problem? I wonder whether you have installed any PDF printing SDKs? Did it work well? Is that because of its probelm? Whatever, I hope you success. Good luck.
Best regards,
Arron

Similar Messages

HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank. I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
1) Rebooted Printer
2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
3) Checked venting - Not the problem
4) From Tools ran head cleaner - still only prints colors (or grey)
I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased. I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
I have the SN and product number available if a tech needs.
Chris

Hi @crfldf
Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

Last week I understood that my Printer does not print at all yellow color.
All other colors and tests I made are ok.
I cleared printheads, made all printing tests, and diagnostic pages.
In every printing was missing the yellow color..
I changed the yellow catridge with another full one, and the problem persists..
PLS could any body help me?
Many tks
antpep

Welcome to the community @antpep
I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
Please click on the link below and try the steps in the guide.
Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
HP's contact info:
If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
Have a wonderful weekend ahead and thank you for posting in the community
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

Printer does not print. Even the test page did not print. I put in a new cartridge.

Printer doesn't print.

adnerb wrote:
My printer does not print the computer screen says scanner failure. I have a HP Officejet 5610v All-in-One printer. The printer is connected with USB. The operating system is Windows Vista. Help!!
See the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Safari does not display PDF files?

My Safari browser does not display pdf files. Whenever a site I'm reading links to a pdf file, a new page open in black but without content.

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

Apercu does not open pdf files

apercu does not open pdf files and crashes

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

SQR does not generate PDF file

Hi,
on F9 with 8.49 tools on a Win 2003 server , the SQR does not generate PDF, but only nnnnn.out and nnnnn.log files.
What might be the reason ? What should be verified ?
Thank you.

Hi ...
the table that uses the output file type is PS_PRCSOUTPUTFILE , lokk into this table...
(or)
login to PIA ...
navigate to peopletools--process scheduler--system settings--process type--process output type.
select sqr and see type web and active and default are checked.
Then navigate to process output format (the next tab to the previous one)
then select process type sqr and output destination type web are selected...
then u should see *.pdf is active and default... if not make it default...
reconfigure the process scheduler(bounce the scheduler and clear cache).
that should give u pdf doc....
any questions... please update
Thnks!

When printing on photopaper with HP PSC 1510, the top part of the print does not print.

When I try to print on photopaper with PSC 1510, it does not print the top part of the print - the paper seems to get feeded well. It looks like it somehow moves the printing area 10 cm higher on the document, so the pictures are cut in the middle and the top part is not printed. This varies - printing using the Windows image preview didn't cut off as much as Open Office's Writer.

As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

Easy Photo Print does not see Aperture files

I have a Canon MP640 printer, which gives me really poor results when used with Aperture (3.1.3) so I have been using the print software that came with my printer (Easy photo print EX). The problem with Easy PhotoPrint, is that this software does not see my Aperture files, even though I have turned on the “View in finder” feature in Aperture. Can anyone tell me how to configure my system, so that Easy PrintPhoto will see my files, without having to export every time I want to print

Ahh ok, that function File->Show In Finder shows the current selection in the finder if it is a referenced image. That's all it does, it doesn't cause any permanent changes to any settings in Aperture or the Finder. Why you couldn't see your referenced files in the finder before clicking this and now you can is a mystery and a coincidence and will do nothing to enable other programs from accessing the images in the library.
As for turning off color management when you print from Aperture, in the print dialog under the Rendering section
when you open the Color Profile you can select Printer Managed.
Once you set it to Printer Managed you'll see the warning change from Turn off in Printer to Turn on in Printer
Might be worth a shot if you haven't try it yet.

Updated Adobe Reader to 11.x, now it does not recognize pdf files

Ok. I don't know how to explain this so I'll do my best. Please let me know if you need more information.
I updated my Adobe Reader to X and noticed that all of the sudden any files that were sent to me via e-mail would not open up. I use Outlook Express to access my gmail account because we have multiple accounts that we use and I haven't figured out how to do that with Outlook! Anyway, this is always the response I would get. It would ask me if I want to open this file. It would give the name.pdf and the type is AcroExch.Document. If I click open, I get the following warning: This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel.
Now if I go to save the file and I just saved it to my desktop, I can open it that way. I don't really want to always have to save files to my desktop or whatever just to open then and see what they are about. I do know that earlier I was having the same issue on my desktop- that it wouldn't recognize the pdf file, but I figured out how to make that association. So I'm wondering how to do this on e-mail.
I have the latest version of Adobe Reader, which I guess now is 11. What else should I do?
Thanks in advance!
Jennifer

Ok sorry I've taken so long to respond. The reply button wouldn't pop up for me to reply!
There was never a dialog box asking for me to select the program from installed programs when I open the pdf from outlook express. But when I opened a pdf from my desktop it asked that question and I had it "always use this program to open this type of file." So I assumed that it was would work when opening from outlook express. But it doesn't.
I've tried unclicking the protected mode button under the preferences general section. And finally I'm not sure how to post screenshots of the attachment thumbnail and dialog. I'm looking all over my keyboard for a button to push I don't have a clue as to what to do! I do have a print Scr button but when I click on it nothing happens. I've tried holding down the shift key and the button and the alt key and print scr button but nothing happens.
Could it be that somehow it's not recognizing ARCO.EXCH.DOCUMENT as that's what it thinks the type of document is?
I've already created an association for pdf files and it'll open them on my desktop, just not in outlook express.

IPRINT 3.0 does not open PDF files from mail apps

I have just installed iPRINT. It finds the printer with no problem (C6180) and I can also load files from the computer to the iPAD on which it is installed. The problem comes when trying to open PDFs from the mail program. There is an option to select open with iPRINT, I do so, and the program opens but the document does not appear. Only the home page of iPRINT. It worked once or twice when I first installed it, but only after screwing around with it.
Can anyone help? It is on an iPAD 1 with iOS 4.3
Thanks.

Uninstall NWBC , go to REGEDIT --> Navigate to HKEY_LOCAL_MACHINE --> Expand SOFTWARE node --> Locate SAP -- Delete the Folder NWBC.
And
2). Expand HKEY_LOCAL_USER --> SOFTWARE -> SAP --> NWBC - Delete.
Restart the system and try to install NWBC again and check.
Thanks,
Arjun

HP PSC 1300 Series printer does not print the entire last line on page

Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

Hp 200 wireless printer does not print the shared attachment only body of the email

In the past I have been able to share an email with the printer and the attachment was printed. Suddenly only the body of the email prints but no attachment. Would also like to know whether one can suppress the printing of the body of the email and print only the attachment. Don't want to waste paper.

Thanks for that additional information @Karl3.
I have a few suggestions that may resolve your ePrint issue. It is possible to print attachments using the ePrint via email method, but results may vary. At times, the formatting of an attachment is lost when using this method or at worst, it will not print.
As it's clear your PDF document is not printing using this approach, I recommend downloading and installing the HP ePrint app - click here to do so.
You'll see that it's geared towards Android users, however, if your Blackberry Z10's software is up-to-date, this app should work for you. Once installed, you'll be able to launch the ePrint app and print directly from files and documents saved to your device. With this interface you have greater control over what comes out of the printer.
With respect to your query about eliminating the extra pages that result from your phone's email signature, click here for instructions on how to turn off your email signature. If you swipe Auto Signature off as indicated in Blackberry's forum, this should ideally stop the undesired signature page from accompanying all ePrint attachment jobs. If the ePrint app doesn't work out for you, see if printing with the signature off yields a better result. Keep in mind when you're sending ePrint jobs to your printer via email that you need to have something in the subject line.
Please let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

XML Publisher does not attached pdf file java.lang.StackOverflowError

Hi there
I have Bursting program which email the pdf report, some times when I have all of data the report does not attached and send to the user, I get following messages in log file.
XML Publisher 5.6 Build 45
Oracle 11.5.10.2
Set Bursting parameters..
Start bursting process..
[081409_034350119][oracle.apps.xdo.batch.bursting.ProcessCoreDocument][EXCEPTION] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(ProcessDocument.java:321)
     at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(ProcessCoreDocument.java:112)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(BurstingProcessorEngine.java:3206)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(BurstingProcessorEngine.java:2112)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(BurstingProcessorEngine.java:2054)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(BurstingProcessorEngine.java:1965)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java:1124)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(BurstingProcessorEngine.java:2153)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(BurstingProcessorEngine.java:1802)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java:1127)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:227)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(BurstingProcessorEngine.java:959)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.process(BurstingProcessorEngine.java:903)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:269)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Caused by: java.lang.StackOverflowError
     at sun.text.normalizer.NormalizerBase.getNextNorm32(NormalizerBase.java:1268)
     at sun.text.normalizer.NormalizerBase.access$1100(NormalizerBase.java:127)
     at sun.text.normalizer.NormalizerBase$IsNextNFDSafe.isNextBoundary(NormalizerBase.java:1306)
     at sun.text.normalizer.NormalizerBase.findNextIterationBoundary(NormalizerBase.java:1359)
     at sun.text.normalizer.NormalizerBase.next(NormalizerBase.java:1436)
     at sun.text.normalizer.NormalizerBase.nextNormalize(NormalizerBase.java:1473)
     at sun.text.normalizer.NormalizerBase.next(NormalizerBase.java:797)
     at java.text.CollationElementIterator.next(CollationElementIterator.java:189)
     at java.text.RuleBasedCollator.compare(RuleBasedCollator.java:367)
     at oracle.xdo.parser.v2.XSLSort.compareObjects(XSLSort.java:500)
     at oracle.xdo.parser.v2.XSLSort.partitionIt(XSLSort.java:463)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:411)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
[081409_034350129][][EXCEPTION] Error while generating the Document...
[081409_034350160][][EXCEPTION] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(ProcessDocument.java:321)
     at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(ProcessCoreDocument.java:112)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(BurstingProcessorEngine.java:3206)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(BurstingProcessorEngine.java:2112)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(BurstingProcessorEngine.java:2054)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(BurstingProcessorEngine.java:1965)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java:1124)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(BurstingProcessorEngine.java:2153)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(BurstingProcessorEngine.java:1802)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java:1127)
     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:227)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(BurstingProcessorEngine.java:959)
     at oracle.apps.xdo.batch.BurstingProcessorEngine.process(BurstingProcessorEngine.java:903)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:269)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Caused by: java.lang.StackOverflowError
     at sun.text.normalizer.NormalizerBase.getNextNorm32(NormalizerBase.java:1268)
     at sun.text.normalizer.NormalizerBase.access$1100(NormalizerBase.java:127)
     at sun.text.normalizer.NormalizerBase$IsNextNFDSafe.isNextBoundary(NormalizerBase.java:1306)
     at sun.text.normalizer.NormalizerBase.findNextIterationBoundary(NormalizerBase.java:1359)
     at sun.text.normalizer.NormalizerBase.next(NormalizerBase.java:1436)
     at sun.text.normalizer.NormalizerBase.nextNormalize(NormalizerBase.java:1473)
     at sun.text.normalizer.NormalizerBase.next(NormalizerBase.java:797)
     at java.text.CollationElementIterator.next(CollationElementIterator.java:189)
     at java.text.RuleBasedCollator.compare(RuleBasedCollator.java:367)
     at oracle.xdo.parser.v2.XSLSort.compareObjects(XSLSort.java:500)
     at oracle.xdo.parser.v2.XSLSort.partitionIt(XSLSort.java:463)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:411)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
     at oracle.xdo.parser.v2.XSLSort.quicksortObjects(XSLSort.java:413)
Bursting process complete..
Generating Bursting Status Report..
Thanks
ASIM

have to see the template.
analyse in the order below.
1. the xmlp version you have might not support some features you have in template, remove sorts in template and try, it should work
2. there are latest patches, which has several features and performance enhancement above, 5.6.3+
take a latest xmlp patch for this.
3. other configuration for performance

My printer does not print pdf files

Similar Messages

Maybe you are looking for