My printer is 2 months old and will not print.

printer will not print and keeps blinking. new ink also unplugged and restarted

Read this about syncing http://support.apple.com/kb/ht1386
Do a backup first http://support.apple.com/kb/ht1766
At some stage in all of this you will be asked to transfer purchases to your computer.  Select yes.
There is no need for a reset

Similar Messages

  • HT1476 my iPhone is only 3 months old and will not charge unless it is turned off and when i try to hook it up to iTunes it says it is an "unrecognizable device" and it will not work!! I have tried the hard reset a hunderd times and that dosen't work eith

    please help me!

    Clean iPhone charging port with a clean dry toothbrush. Try different good USB Cable. If still problem, all iPhone 4S have full Warranty, make Genius appointment and take iPhone to Apple for resolution of problem.

  • HP printer is in paused status and will not print. HP6520

    How to remove the hp6520 printer out of paused status?

    Hello BJClayton,
    Welcome to the HP Support Forums!
    I would like to offer a hand in an attempt to resolve the paused printer issue with the Photosmart 6520. What is the Operating System installed on the computer, Windows or Mac?
    Also, how is the printer connected to the computer, USB or Wireless?
    If Windows, please run the HP Print and Scan Doctor. This will look into the drivers, software and communication that the printer users and try to fix the paused status.
    Let me know the results, if you are able to run it, and we can take the next steps if any are needed.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printer is less than 2 months old and suddenly began sounding like a machine gun and will not print.

    Printer is less than 2 months old and suddenly began sounding like a machine gun and will not print.

    It sounds like it is broken.  Contact HP about a replacement: www.hp.com/go/totalcare
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • The document shows in the printer viewer, but it is paused and will not print.

    Hi, when ever I try to print anything, the doc is in the viewer but is always paused, and will not print. I've tried to restart, but it will not do it.
    Any advice?

    Hi, are you referring to a problem in trying to print via the ePrint service e.g.. sending an email to your printer's email address, or printing directly from your PC/laptop?
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • LR 4 - image does not appear in Preview and will not print`

    The selected image appears on the main/center panel but not in the preview screen.  Printing results in a white sheet of paper with no image at all.  The image has been updated to LR 4 - but made no difference.  I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem).  What am I doing wrong?

    The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
    Date: Tue, 10 Jul 2012 16:01:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: LR 4 - image does not appear in Preview and will not print`
        Re: LR 4 - image does not appear in Preview and will not print`
        created by Brett N in Photoshop Lightroom - View the full discussion
    Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HP 7280 all-in-one says ink cartridges are empty and will not print from PC, but it copies fine.

    Replaced 2 ink cartridges in hp 7280 but still says both cartridges are empty and will not print from PC, but it will copy fine.  When I try to print I get a error box that says "Ink cartridges empty - replace black and yellow ink cartridges to continue."  They are brand new - just bought them - expiration date Sep 2015.  Have tried rebooting and disconnecting and reconnecting everything.  Same error, but it still will do color copies fine - all cartridges are working.  Help?! 

    Hi tfmartin,
    I understand you have a Photosmart C7280 that you are unable to print to from your computer. I'm sorry to hear about this, but I will certainly do my best to assist you in resolving this issue.
    Before I can offer any suggestions I do need to know which version of Windows or Mac that you're using and how the printer is connected (wireless or USB). Once I have that information I should be able to help you better. In the meantime, if you're using Windows, please download and run the HP Print and Scan Doctor to see if it can assist with the issue at hand
    Hope to hear back from you soon! Have a great day
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Laser Jet 1536dnf MFP says memory low and will not print

    Laser Jet 1536dnf MFP says memory low and will not print. Have tried hard disconnect and restart. Error persists.

    Hey ,  Welcome to the HP Support Forum.  I hope you enjoy your experience here. I see that you're encountering the memory is low error status on your LaserJet Pro 1536dnf MFP. I would like to help.  For this particular error, I have found the NVRAM Initialization type of reset to be beneficial in restoring functionality.  Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here.   As HP does not typically make the steps for this type of reset available publicly, I will private message you the instructions you need.  Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum.  Have a great day! 

  • 8500 does not show troubleshooter as turned on. It is on and will not print.

    Had this printer for many years. No problems. It now will not print. Windows 7 troubleshooter says to turn on the printer and try again. The printer was and is powered up and will not print. I have cycled both the printer and the computer trying to sync them.

    Uninstall LR from Control Panel—there may be more than one entry:  Adobe Photoshop Lightroom, Photoshop Lightroom, Lightroom are all possibilities, then after LR has been uninstalled, log out of the CC Desktop app using Gear / Preferences / Account / Signout, reboot, and then see if LR shows up in the CC Apps list, after you give it a minute or two to contact Adobe’s servers.  LR 5.6 is the current version which is probably what the update message is about.

  • I have a Officejet 8500 A910n. When printing a pdf the print job just stops and will not print.

    Only certain files the print job just stops and will not print in Adobe Acrobat X.  All other applications work fine.

    Have you tried downloading and installing Adobe Acrobat XI?  http://www.adobe.com/products/reader.html
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 10.9 Reports HP Laser Jet is out of toner and will not print: printer does in fact have sufficient toner.

    10.9 Reports HP Laser Jet is out of toner and will not print: printer does in fact have sufficient toner.

    That message originates from the printer, not the Mac. Get in touch with HP, perhaps they have an explanation.

  • My Hp 8500a plus printer keeps saying it is offline and will not print. Was printing now stopped.

    I have an HP 8500a plus printer. Lately, when I go to print from Macbook or iPad, it tells me the printer is offline. My printer says it is connected to my wifi but will not print. Printer firmware is up to date. I have changed nothing, and now it will not print. Very frustrated and tired of spending all of this time trying to fix the printer just to print. This is my second HP printer this month and it works sometimes and doesn't work sometimes. 
    Am I missing something? I don't understand how it can print one day and not the next. 

    Try this if it is an Airprint Printer.
    1. Turn the router, iPad and printer off
    2. Turn on the router and then wait 30 seconds
    3. Turn on printer and then wait 30 seconds
    4. Turn on your iPad and test print.

  • I am trying to print a fillable form.  It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print."  Th latter is not true.  Won't print all, the page I am on, nor any series of pages inserted

    I am trying to print a fillable form - - an application for a Chinese visa.  It will not print and I get two error messages:  "document could not be printed" and   "there were no pages selected to print."  The latter is not true.  Won't print at all, the page I am on, nor any series of pages inserted.
    Am using a MAC desktop and a Cannon PIXMA MX922 printer.
    I need to print this form now that it is filled out?  What can I do? 

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • Photosmart 7520 - error code 0x61011beb makes alot of noise and will not print!!!!

    I am at the year mark with this print. It has only been used about five times. I tried to use it one day and recieved an error message 0x61011beb. The printer is making alot of noise like its moving the ink over too far and do not know when to stop it. I have tried about everything. Unplugging, resetting, and just about everything that is mentioned on here to do. I am at a lost right now.
    You only use the printer when needed. I had an interview and could not print my resume. I am not liking this HP at the moment. It is really letting me down.

    Hi ebonieeyes,
    I am sorry your printer has let you done when you needed it most! Let's see what we can do to get it working again.
    The error message you are seeing generally means 'carriage jam'. Please use the solutions offered in the following document to resolve the issue; A 'Carriage Jam' Message Displays on the Control Panel.
    If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c03405144.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    Even if the printer is out of warranty, it is best to call HP to see what they have to offer. 
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I downloaded the new version and it has reverted to the old and will not let me re-install the new because it thinks it is installed

    I downloaded the new version of Pages and it has reverted to the old version.  It will not let me re-install the new version because it thinks it has it installed

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store.
    Peter

Maybe you are looking for