My printer is a canon mp495 cannot get wifi printer to work from my ipad

I am using telstra as server. Can anyone help

Your printer is not supported in AirPrint, which is what the iPad uses to print. Here's the article detailing this:
http://support.apple.com/kb/HT4356

Similar Messages

Cannot get Home Sharing to work on my iPad, iPad 2 or Apple TV 2

I am running iTunes on a network-connected Windows PC and I have authorized the PC and turned on Home Sharing. I cannot see my shared library on my iPad, iPad 2 or Apple TV 2.
In fact, in the left navigation pane in iTunes, I don't see the "Home Sharing" section.
I have applied all the latest updates to Windows and iTunes as well as iOS for the iPads and Apple TV. I am running Microsoft Security Essentials software. I tried disabling the firewall and it still did not work.
I tried doing as much as applicable from this: http://support.apple.com/kb/TS2972 and I am not getting anywhere.
Any help is appreciated.

I am having the same problems with Home Sharing using the Apple TV. The problems seemed to appears to have started within the last week or so. Did updates and all. Went to the Apple TV and it couldn't see either Home Share on either computers that Home Share is turned ON. Reset the routers, reinstalled iTunes on the iMac and MacBookPro. Created a second Wi-Fi Access point using a Airport Express. Put the MacBookPro and TimeCapsule on the same network and still no love to see the Home Share contents.
We have had both Mac's and Apple TV for several years and have never had any problems like this.

I cannot get old notes to sync from my iPad to iCloud.

I have hundreds of notes on my iPad 2. They were originally created on an old iPhone 4S and synced over to the iPad 2. The iPhone 4S is now gone. I bought a iPhone 5S. I can create notes on my iPad 2 and sync them to iCloud (which then goes to the iPhone). I can do the same in reverse: iPhone 5S to iCloud to iPad 2. However I cannot find a way to get the hundreds of old notes on my iPad 2 to go to iCloud and then to the iPhone 5S. Apple is telling me that I'll have to hand-enter the hundreds of notes. There HAS to be a better way!

It will be recognised as a camera if you've got photos on it that were taken with it, copied to via the camera connection kit, or saved from emails/websites etc i.e. non-computer synced photos (it's the way by which they can be copied off the iPad : if you want to turn the camera feature offthen there are instructions here http://support.apple.com/kb/HT4083).
In terms of iTunes, have you got the most recent version ? If you've tried rebooting your computer and it still doesn't appear, then there is troubleshooting help here : http://support.apple.com/kb/TS1538 for PC, and http://support.apple.com/kb/TS1591 for Mac

TS3899 I cannot get my emails to send from my IPad. I can send on my desktop computer. That's why I think it is within my IPad that I have issues. I tried to delete the account and readd it. It still won't send. I can receive email to it. What else can I

Does anyone have any other suggestions

Yes, their email is powered by Yahoo! who is having critical issues with their email products. It's been all over the news so I'm surprised you didn't see it.
http://bgr.com/2013/12/16/yahoo-mail-access-restored-mayer-apology/
Looks like you just need to wait it out. Good luck!

I cannot get my 3g to work on my Ipad 2, it worked for a month and now it will not connect???? Please advise . . .

I have signed up with Verizon, my account says I have 100% unused data available but when I turn on Cellular data, it tries to use 3G but the connection fails??

APN is a network identifier for mobile device
http://en.wikipedia.org/wiki/Access_Point_Name

How do I get air play to work from my ipad?

How do I get my Apple TV to allow me to go to my ipad on airplay it is not working

Welcome to the Apple Community Jaden.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

Cannot get wireless scanner to work

wireless printing to my HP Officejet Pro 8500 works fine but I cannot get the scanner to work - it fails to even communicate with the HP device. My operating system is Windows Vista. The error message I get when trying to use the scanner by clicking on the "HP Officejet Pro 8500 A910 Scan" icon is "Scanner communication cannot be established."
Thank you for your help
This question was solved.
View Solution.

Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot Get Animated Buttons to Work in DPS (InDesign 6.0) Help Please!!

In DPS tips, using the iPad app, some of the navigational buttons appear like SWF buttons, but, I cannot get SWF buttons to work in DPS. I have been trying with Multi-States, but, cannot get that to work either. Can you tell me how to get a SWF like button to work in DPS - I'm working with ID 6.0.
Do you have an eaasy answer? Is there a tutorial out there I can view? Is their a step-by-step I can read?
BTW, I do understand how buttons work and the types of events that work in DPS.
Thank you
Lain Kennedy

Hi Uwe,
First, let me say "I cannot even believe all the wonderful information I have recieved from my original post," and, I want to thank you for your understanding.
I have been a designer for many years, working before the computer, and, since the mid 80's working with a variety of software to produce both print and web projects. I must say, I am biased on the Adobe Creative Suite, and, have had amazing success with these tools.
Nonetheless, I have been working with DPS for about a month now (and a month does not make a career), and, have to admit, I am looking at DSP as a Hybrid between Print and Web. Yet, it is neither print or wed, it is it's own element, and, I'm just having growing pains learning, especially the terminology.
Yes, I am trying to explain SWF Buttons, when in reality, it is DPS Buttons, and, my thinking is based on print and web. Now, it is - in some ways - like going back to school learning DPS and DSP terminology. It is a bit frustrating, but, I know I will get it.
Now that I have looked at my first MSO test, I followed the instructions in DPS Tips, I realize that the Button is in the "Normal State" as I (interact, this is my terminology) touch or hover to make the button work. It is in the "Click" state that the Button triggers the MSO to work, and, I finally get that now - okay, I'm slow to learn. And, I will be building a complex MSO to prove the point to myself.
I was wondering, besides DPS Tips, are there any books, apps, specific sites that are very specific on "ALL" the things one can do with DSP?
Again, thank you and, all the folks who have taken their time to respond to my post. All the information is truly appreciated.
Sincerely,
Lain Kennedy

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. Tried everything. Help!

We own 5 Apple devices but for some reason I cannot get iTunes to recognize one of the iPads. The other 4 show up just fine and we can sync and do all the stuff we are supposed to do, but this one device is never recognized. I've tried updating the software, reinstalling iTunes, using different ports on the laptop, different cables...just about everything. I have NEVER been able to connect this one device, but all the others are fine. I'm at my wits end. Is there someone out there who can help a relative novice figure out what's going on? Thanks so much!

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

IPhone 3 I cannot get my pictures to download from iPhoto. I keep getting the error message required file cannot be found.

I cannot get my pictures to download from my iPhoto from an albumto the iPhone 3 (one of the kids phones). I was able to download an Event. I have changed the name. I have used my iPhone 4 and the pictures from the album downloaded just fine. I have looked at the message board and I have deleted the cache and done all the things that were suggested. WHAT IS THE DEAL!! I have been working on my phone and the kids phones for about five hours now and super frustrated!!!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

HT2240 I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6

I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6 I have copied and pasted exactly as require (I don't have an organization). Any suggestions? Thank you!

There is no QuickTime System Preferences pane in 10.6.8 or later.
You enter the registration under the player 7 menu.

I cannot get airport extreme to work. Can you help me?

I have a G5 Power PC. I recently purchased a macbook and an Airport Extreme. I cannot get the airport to work. Can somebody help me please??
G5 Power PC and macbook Mac OS X (10.3.9) new OS X on Macbook

I plug the ethernet from the airport to the back of the modem (a Webstar unit) from my cable provider. Then I plug the other cable from the back of the airport into my G5. Then plug in the power cord. I get lots of flashing lights - "thinkin & blinkin", but then I get a message that it cannot locate the server. Even rebooted. I've been waiting for the IT guy to call/email me back me back but no response yet. I'm guessing I may just need a new location, but I'm not wired to think IT-like (I'm a very right brained graphic designer), I I don't want to screw anything up.
Do I need to just go through a new internet setup?
G5 Power PC and macbook Mac OS X (10.3.9) new OS X on Macbook

I cannot get wireless mouse to work in windows 7 using bootcamp

I cannot get wireless mouse to work in windows 7 using bootcamp

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

My printer is a canon mp495 cannot get wifi printer to work from my ipad

Similar Messages

Maybe you are looking for