My printer is connected to the network and is accesable,I can not setup webervices cant reach server

HP Officejet Pro 8600 N911a
Windows 7
Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings.
The printer is connected to the network with proper DNS I am the adminastrator

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the network icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
5. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
6. Click on IPv4 under the correct connection (wired or wireless) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

My printer is connected to the network but is unable to communicate with computer

my printer is connected to the network but is unable to communicate with computer

Hi mdqprimitive,
Sry to hear about your wireless issues.
Can you please provide some further info. so we can better troubleshoot the issue you are experiencing.
What model is your HP Printer?
What model router are you using for your wireless network?
Print out a Wireless Network Test Report from the wireless menu of your printer's front panel.
What does the report show?
Did your laptop successfully discover the printer after installing the software?
Thank you

HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..

You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

Hi, Jjenjen30.
Thanks for the question and I believe we have a solution. The best option would be to delete the movie that is giving you an issue and redownload it via the iTunes store past purchase option. I have included a couple articles that will show you how to process these steps.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If this does not resolve the issue, then iTunes might need to be notified to let them know there is a problem with the content. I have included the steps on how to let them know.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Cheers,
Jason H.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

HT204400 no matter what i try, my apple tv says it cant connect to the network and it gives me error -3906. i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi. I have tried to restart and restore both the apple tv and my modem. still the same issue and same error message. any ideas?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Updated to ios7 and lost the iMessage and FaceTime as they can not connect with the net?

I have updated my iPad to ios7 and since the iMessage and FaceTime can not cone connect to the internet and keep tell me that try when you have internet connection

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Apple must allow only owner can turn off iPhone by his password. Otherwise the thief can turn off the phone and run away, owner can not trace him.

I lost my iPhone 5 months ago. The thief just turned off my iPhoen and ran way. Even I set password for my iPhone but he can turn it off and of course I can not trace my iPhone by using FIND MY iPHONE. Apple should consider this situation. Thanks

Tell Apple.
http://www.apple.com/feedback/iphone.html

My printer will not connect to the network and i cannot find drivers for it

I just installed Win 10 64 bit and I lost all connection o my printer it is saying I am on another network and each time i try to load the drivers for it it fails

Hello vikagor,
Thank you for visiting Apple Support Communities. It sounds like you are talking about cellular data not phone calls that's the issue.
For troubleshooting cellular data issues please see:
iPhone cellular data connection issues
Note the first symptom is, "No connection over cellular network, but works over Wi-Fi".
Take care,
Nubz

New MacBook Air having trouble connecting to the network and staying connected

I have an iMac as my prime and a MacBook Air as my remote. My network is all Apple. If I close the lid on my MacBook Air it immediately disappears from finder as a shared resource. However, if on first run though I put it to sleep and then close the lid, it will remain on the network as a shared resource. From hereon in, I can just close the lid to put it to sleep and its fine.
If I restart either computer or both computers, I have to go through the first run routine again. What makes matters worse is I’m trying to do an 11pm Retrospect backup of the Air and if it gets lost from the network Retrospect is unable to find the device. I have to do a locate in Retrospect and then let it do its backup.
I think this putting it to sleep on first run and then closing the lid to maintain stability is just a workaround I accidentally discovered. I don’t think it should be working like this. I think if I just close the lid and let it sleep that way on first run it should remain on the network as a shared resource and I should continue to see it on my iMac in Finder but this isn’t the case.
I’m really looking for opinions on this issue, if others have experienced this and is there anything that can be done about it. I’ve got mixed messages from Apple Tech support but Retrospect tech support said I’m doing everything right. This to me seems like a bug in probably the software. The machine runs fine except for this one little quirk.
Kerry

Yes its ticked. I’ve worked at this for two weeks and have gone through every iteration I can think of. Apple said that it is normal that the lid has to be open to have the shared resource but as long as on first sleep I put it to sleep first then close the lid it remains in the iMacs finder Window as a shared resource. And I can open and close the lid from thereon in and it is always there as a shared resource and Retrospect can locate it for backups.

I cannot connect my HP printer to my iphone. The printer is connected to the wifi and I can print just fine from my PC. Any suggestions?

I cannot print anything from my phone to the printer. I cannot see my wireless HP printer to select from the iphone. Can someone help?
Thanks.

Check this Apple suport document http://support.apple.com/kb/HT4356 and see if your printer is listed. If it is, follow the instructions on the balance of the document to see if that takes care of your problems.

My new ipad 2 freezes after using the internet for about 15 minutes. It is properly connected to the network and works fine after I re-start it but it is very annoying to have to re-start it every so often. All other laptops on the internet work fine.

My ipad 2 freezes when using the internet. Re-starting the ipad fixes the problem but it is very annoying to have to do this. I have tried all of the trouble shooting suggestions including re-joining the network. All other laptops work fine on my network. I think there is something wrong with my new ipad.

I recommend two things before taking your iPad back to the Apple Store.
1. Fully close safari, by going to your home screen, then double tapping your home button to bring up your most recently used Apps. Using your finger, hold it on any of the used Apps until they jiggle. At this point, you'll see a to the top left of each App. Touch the sign on Safari, which will fully close it.
Then.......
2. Reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data.
If that does not help, then make an appointment at the Apple store to have your iPad checked.

Printer is connected to the internet but says that i am not connected to the print centre

Help~
My wireless printer is connected to my PC, no issues with printing however; when i try to access the "apps" function to print calenders and misc. items it says i'm not connect to the server? The settings show i'm connected to the right wireless network...

Hello ,
Welcome to the HP Support Forums!
I understand that you are unable to access / print from Apps on your printer, but it will print from the computer without issues. What model of printer do you have?
The most common fix for this issue is to setup a static I.P & DNS for the printer. Follow the outlined steps here: Efax 7510 still won't work after turning off/on ePrint several times. The steps provided by happytohelp01 may be slightly different in appearance than your printer, however they should be very close.
Let me know if that helps.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When I try to use Safari on my i6 phone to connect to internet, it says "Safari could not open the page because the server stopped responding." However, my wi-fi is connected on the phone and computer. What can I do to correct this?

When trying to connect to internet, my i6 phone says "Safari could not open the page because the server stopped responding." However, our house's wi-fi is on. Any ideas why this is happening?

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

Ipod touch does not turn on the screen shows USB cable and ask to connect to the itune, itune message pops up can not connect because it is locked with pass code how can i turn on this device?

My son's ipod touch 3 screen shows a USB cable image and ask to connect to the itune. Itune does not connect with the message shows: this device is locked and can not be connected to the itune before you unlock it" I have no idea how to turn on this device and how to connect this to the itune, any help is highly appreciated.

Try to get it to recognize it by using DFU Mode. Then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

My printer is connected to the network and is accesable,​I can not setup webervices cant reach server

Similar Messages

Maybe you are looking for

My printer is connected to the network and is accesable,I can not setup webervices cant reach server