My printer is connected to the network but is unable to communicate with computer

my printer is connected to the network but is unable to communicate with computer

Hi mdqprimitive,
Sry to hear about your wireless issues.
Can you please provide some further info. so we can better troubleshoot the issue you are experiencing.
What model is your HP Printer?
What model router are you using for your wireless network?
Print out a Wireless Network Test Report from the wireless menu of your printer's front panel.
What does the report show?
Did your laptop successfully discover the printer after installing the software?
Thank you

Similar Messages

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

My printer is connected to the network and is accesable,I can not setup webervices cant reach server

HP Officejet Pro 8600 N911a
Windows 7
Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings.
The printer is connected to the network with proper DNS I am the adminastrator

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the network icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
5. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
6. Click on IPv4 under the correct connection (wired or wireless) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
This may or may not correct your problem - call back if it doesn't.
Clinton

I'm connected to the network, but still can't get online!

I use airport to connect to the internet in my home. I have a very strong signal and my computer says I'm connected to the network, but I still can't connect to the internet. It just stopped working. Running diagnostics doesn't help- it just tells me to restart the device, which I've done over and over to no avail.
iMac Mac OS X (10.4.10)

Am a newbie but somethings may work here, Go to dock preferences and to network and to your airport connection window.
You have a green light signal in network status window? If it is yellow or red it is unavailable. If your connection is full of traffic, this may effect connection.
In window you may need to type in optional search domains. Your provider should tell you this no one else~ They would also walk you through your connection failures. If it is yellow and you connect to your provider's router and don't have your own router, this number may not appear in your connection information. You need to tell them their router is down so they can fix it. They may not find out if pings come back. Pings may also be cached (I am not sure but it might) so it may take them a while to find out if you don't tell them. I would call your provider. Maybe empty your preferences in your browser. You may have cookies or garbage to empty there. Use another browser.
iMac Mac OS X (10.4.10)

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

Have you tried clearing Safari? Clear Safari, close Safari completely and reboot your iPad. Try again.
Go to Settings>Safari>Cookies and Data.
If you are running iOS 5 or iOS 6 you close apps like this. Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
If you are running iOS 7, you close apps this way. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

When i try to sign on to istore it says im not connected to the network but i am connected to the network

when i try to sign on to istore it says im not connected to the network but i am an i cant sign on

Hello patirots,
If you cannot connect to the iTunes Store, I reviewing the steps in the following article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thank you for using Apple Support Communities.
Best,
Sheila M.

Apple TV connects to the network but cannot connect to the internet.

Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective??? Thank you!

This might help:
Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
Enable Wireless MAC filter
Enable "Permit PCs listed below to access the wireless network"
Enter the Apple TV's MAC address
Click "Save Setting"
When I did this the network connection immediately started working.
Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

The updater has been unable to communicate with the update server for at least 1h.

Hi All,
there is a warning message on one of my IronPort C300V
Version: 8.0.1-023
The error message is mention below
"The updater has been unable to communicate with the update server for at least 1h."
please suggest the issue and steps to resolve the problem or suggest that it is very critical so can i open the cisco tac call.
Thanks ,
Madhuraj

If you continue to receive this error please check that the virtual appliance is configured to use the dynamichost for updating:
myesa_2.local> updateconfig
Service (images): Update URL:
<ommitted for brevity>
[]> dynamichost
Enter new manifest hostname : port
[update-manifests.sco.cisco.com:443]>
Once 'dynamichost' is entered, the current dynamic host in use will be displayed in the prompt [ ]>, as seen above.
You will need to verify that the appliance - escpecially if a virtual (VESA) - is using the correct host.
Steve
Cisco Content Security - Email Security

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

Connected to the network, but can't get out to the Internet

Here’s my problem… After my previous router died, I recently installed a Netgear wireless router (WGT624NA) with 128-bit WEP security, and created a new wireless network. My Powerbook G4 found the network, and I was able to put in my WEP password, and everything seemed to work fine … for a while. In the last couple of days, I can’t get to any Internet sites.
I’m connected to the wireless network fine, with a strong signal level, and I seem to be able to Ping out. But when I try to go to (any) Internet site on Safari, I now get “Safari can’t connect to the server”. I’ve gone through the Network Setup Assistant, put in the correct WEP code, and after hitting “continue” from the “You’re now ready to try connecting… “ screen, get “Unable to establish a network connection”.
I seem to be connected, but can’t get out. Help.
Powerbook G4 Mac OS X (10.3.9)

Hi there,
A UPS (Uninterruptible power supply) is a battery back up, so if you power goes out you can finish up what you're working on and shut down normally.
I had a similar incident this week, power went out all computers, modem and router went out. After power was restored all started up fine and looked good. Wireless router showed I was connected to the internet but could not surf any site. I had changed my email account password several weeks earlier (email account provided by my ISP) and did not think this had anything to do my boradband connection, but I was wrong.
To make a long story short, I had to update the password as it related to my broadband connection. The connection was there, it just did not recognize my new password because I had changed it... If you control the account and you've changed any passwords associated with account yu will have to update or your landlord will have to update... make sense?
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

HT1595 Apple tv will connect to the network but cannot connect to the Internet

My apple tv is connecting to my network but it says it cannot connect to the Internet. I've already tried restarting everything and I've also connected it to my portable mifi network with same results. Anybody have any ideas?

This is what the MAC address clone looks like:
Should I enable it? If so, should I put something in the MAC Address? What? I was able to connect it thru my MiFi, but not my home network. Until today, it's been connected to my home network for about 8 months with no problem. Haven't used it for a while...not since I got a new router.

Apple TV won't connect to the network, but all other devices will.

It's just the apple tv. my computer, iPhone, iPad all connect to the wireless no problem but all of the sudden the apple tv says it cannot connect to the network. I tried powering down the apple tv and tried resetting it but it will not connect. any tips? thanks!

Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections

My printer is connected to the network but is unable to communicate with computer

Similar Messages

Maybe you are looking for