My printer is not taking hold between two print ? What Do i do ?

Hello Sir ,
I have Hp Laserjet 4200n Printer.Operating System installed is Windows XP,But this printer is not taking hold between two print ? What Do i do ?
Regards
Vishal Bhadle
09922222700
[email protected]

It depends on exactly what printer you have. For example, if you have an old Epson printer that is not AirPrint compatible, there is an iPad app called Epson iPrint that will allow you to print from certain selected programs (e.g., Safari, photos).

Similar Messages

I was restoring my phone and sametime my laptop turned off and now i m trying to restore again so its not taking any ristore.. so what can i do????

I was restoring my phone and sametime my laptop turned off and now i m trying to restore again so its not taking any ristore.. so what can i do????

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Pageflow variable values don't hold between two ajax requests

I have pageflow application(Portal) where I have implemented typeAhead(like google suggest with AJAX) for two select boxes. Here I have to inform the server of the firstbox value after it is selected(with AJAX) to save it in pageflow variable so that for next request(while typing in second select box), the corresponding select option data determined by first selection has to be returned. But I see that pagflow doesn't hold values between subsequent ajax requests.But as per BEA Pageflow description values are retained till the end of session.
Does it have anything to do with the ajax requests which are not normal HTTP browser requests? Plz any suggestions are welcome.

Hi
Thanks for reply,
I know that you said, because I did some ABAP programs and some ABAP reports of the bussiness process of Collateral Objects, with information of these tables and when I tried get information, I did something like you said, or I assigned cms_ast-object_ref_id to a variable, and this varible I converted to the same type of the other field and find the match or join between the tables(cms_movables, cms_ast).
The problem is not when I do an ABAP program. The problem is:
(BO)Business Objects needs to get some information about these tables to do some reports, but BO has not the tools or the capacity to convert fields, as well as ABAP. BO gets information directly of the tables of database.
The posible solution to this problem is that I can create a job and a program, which function is replicate the information of cms_ast and insert on a "z" table or get the relation between to tables (cms_movables and cms_ast) and insert on a "z" table. These can help BO to get information, because BO instead of get information of this tables (cms_movables, cms_ast) , now get information of the table z and then get and join with other tables.
The principal problem is that BO get information online, with these the job which run the program need to be run minute per minute. and I think that it is not the best practice, because all the tables are some scalables.
I think that my program could be better, how can I catch a INSERT event on table cms_ast, to convert the fields, and insert on a "z" tables
Or anybody have an idea, how can i solve these problems?

Joins between two schemas

Hi
I need data from two different schemas. Can develop one subject area taking 2 tables from 2 different schemas or we need to have these two tables from one schema only ?
Can any one help on this.
Thanks
Manu

Hi,
When you try to create physical join between these two tables of different schemas.
The join condition is REGION.REGION_CODE = REGION.REGION_ID
Note: The table name is same in both the schema.
Now as soon as I click on Ok, it gives an error.Because You can not create join between two tables with the same name.
So, create alias for these two tables and try to create the join with the same join condition.
It allowed me to create join perfectly. I moved ahead with the creation of Subject Area based out of these two tables.
Opened Presentation Services, selected few attributes from both the Presentation folders.But it gave ODBC error as :
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition m_CountFields == static_cast<int32>(m_ColumnNameVector.size()), file .\Src\SQCSCacheStorageListStream.cpp, line 221. (HY000)
Now in order to fix that issue, rename the base tables as Schema1_name.REGION and Schema2_name.REGION in the repository.
Reload the rpd and run the same report, it would give correct result.
But instead you can have the tables in the same schema for better maintenance activities.
Hope this solved your question.
Regards
MuRam

Binding between two compoents?

hi friends
i'm not able bind between two components...
im sending my code please help me...
how to approach using metadata or waht?
got stuck here
***************************** main application*******************
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:ns1="*">
     <ns1:mypanel x="100" y="100">
    </ns1:mypanel>
</mx:WindowedApplication>
********************************* component 1*****************************
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml"
     width="400" height="300"
     creationComplete="init();">
<mx:Script>
     <![CDATA[
        [Bindable]
        public var mystring:String;
        public function init():void
        mystring = "prajnith";
    ]]>
</mx:Script>
</mx:Canvas>
************************************component 2***************************************
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
      width="400" height="300"
      creationComplete="init()">
    <mx:Script>
        <![CDATA[
        import mx.controls.Alert;
        public     var callcanvas:mycanvas = new mycanvas();
         public function init():void
            Alert.show(callcanvas.mystring);
        ]]>
    </mx:Script>
</mx:Panel>

hi
try this
Alert.Show(FlexGlobals.topLevelApplication.callCanvas.myString);
I assume component one is instantiated as callCanvas.
David.

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites.

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites. What do I need to do?

Me too but it's happening on my iMac after I did a software update this morning which included fixes in Mail it said. My Mail was fine before the update!

I have an external disc drive that is not taking discs any suggestions?, I have an external disc drive that is not taking discs any suggestions?

I have an external disc drive that is not taking discs any suggestions?

what make a model external? Did it work before with your Mac? More details needed.
ejecting right away, damaged loader
ejecting after several seconds dirty laser diode lens
(this is the typical scenario)
Insert a commercial DVD and what happens?

How to make search between two dates accept null not obligatory search proplem

Hi guys when i search record between two dates it works ok success but you must enter date from and dateto first to to make search
i will show what i need from this example
I need to search dynamic by 4 textbox
1-datefrom
2-dateto
3-EmployeeNo
4-EmployeeName
but search i need must be dynamic meaning
if i enter employee no only give me employee no found in database
if i enter employee name give me employees found with this name using like
if i enter all 4 text box null and enter button search get all data
but i have proplem in this query when i need to search by click search button
i must write date from and date to firstly then write employee no or employee name if i need to search
so that i need to search by employee no alone or employee name alone without using date from and date to
And if i search without using datefrom and dateto it give me message error 'string wasnot recognized as valid datetime"
my stored procedure and code as following :
ALTER proc [dbo].[CollectsearchData]
@StartDate datetime,
@EndDate datetime,
@EmployeeID NVARCHAR(50),
@EmployeeName nvarchar(50)
as
Begin
Declare @SQLQuery as nvarchar(2000)
SET @SQLQuery ='SELECT * from ViewEmployeeTest Where (1=1)'
If (@StartDate is not NULL)
Set @SQLQuery = @SQLQuery + ' And (joindate >= '''+ Cast(@StartDate as varchar(100))+''')'
If (@EndDate is not NULL)
Set @SQLQuery = @SQLQuery + ' And (joindate <= '''+ Cast(@EndDate as varchar(100))+''')'
If @EmployeeID <>''
Set @SQLQuery = @SQLQuery + 'And (EmployeeID = '+ @EmployeeID+') '
If @EmployeeName Is Not Null
Set @SQLQuery = @SQLQuery + ' AND (DriverName LIKE
''%'+@EmployeeName+'%'') '
Print @sqlQuery
Exec (@SQLQuery)
End
Function using
public DataTable SearchDataA(string ConnectionString,string EmployeeNo,string EmployeeName, DateTime StartDate, DateTime EndDate)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "CollectsearchData";//work
cmd.Parameters.Add("@StartDate", SqlDbType.DateTime);
cmd.Parameters.Add("@EndDate", SqlDbType.DateTime);
cmd.Parameters.Add("@EmployeeID", SqlDbType.NVarChar, 50);
cmd.Parameters.Add("@EmployeeName", SqlDbType.NVarChar, 50);
cmd.Parameters["@StartDate"].Value = StartDate;
cmd.Parameters["@EndDate"].Value = EndDate;
cmd.Parameters["@EmployeeID"].Value = EmployeeNo;
cmd.Parameters["@EmployeeName"].Value = EmployeeName;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
interface button search
try
CultureInfo ukCulture = new CultureInfo("en-GB");
FleetManagment.Fleet fleet = new FleetManagment.Fleet();
DataTable Table = fleet.SearchDataA("Data Source=" + value1 + ";Initial Catalog=" + value2 + ";User ID=" + value3 + ";Password=" + value4 + "",textBox3.Text,textBox4.Text, DateTime.Parse(textBox1.Text,
ukCulture.DateTimeFormat), Convert.ToDateTime(textBox2.Text, ukCulture.DateTimeFormat));
dataGridView1.DataSource = Table;
dataGridView1.Refresh();
catch (Exception ex)
MessageBox.Show(ex + "error");

Yes, the below code should not be passed any value: (I am not sure of the syntax in .NET,Sorry)
--If startdate len is 0 - do not assign this value
cmd.Parameters["@StartDate"].Value = StartDate;
--If endate len is 0 - do not assign this value
cmd.Parameters["@EndDate"].Value = EndDate;

Awk - printing a value between two matching regex [SOLVED]

I'm trying to write a script to parse a single line output, but to then only display the value between two matching regex.
I have got it to only display the value between the matching regex, but then it carries on and displays the rest of the line. How do I tell it to stop once the matching value has been printed?
ARTIST=`awk '/Artist/,/Artist/ {gsub(/Artist/, Artist); print}' /home/sapphire/.foobar2000/track_info`
This produces 'Akira Yamaoka Title She Title Album Silent Hill 1 OST Album CurrentTime 0:03 CurrentTime TotalTime 2:01 TotalTime' rather then the desired 'Akira Yamaoka'.
So I guess I'm asking how one would go about terminating the above awk command? Thanks - I know, it'll be something simple - but I'm not experienced with scripting
Last edited by wyvern (2008-04-10 11:37:30)

ibendiben wrote:Could you share the file you are extracting the data from?
No problem, and thank you for the help so far
This is what's written each time I update my playing track, no more, no less:
Artist Akira Yamaoka Artist Title Silent Hill Title Album Silent Hill 1 OST Album CurrentTime 0:04 CurrentTime TotalTime 2:51 TotalTime
Single line only, as the plugin won't break up the text into anything more than the one line

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Site to Site VPN Between Two ASA 5505's Up But Not Passing Traffic

hello,
i am setting up a site to site vpn between two asa 5505's. the tunnel is up but i cannot get it to pass traffic and i have run out of ideas at this point. i am on site as i am posting this question and only have about 4 hours left to figure this out, so any help asap is greatly appreciated. i'll post the configs below along with the output of sh crypto isakmp sa and sh ipsec sa.
FYI the asa's are different versions, one is 9.2 the other is 8.2
Note: 1.1.1.1 = public ip for Site A 2.2.2.2 = public ip for site B
Site A running config:
Result of the command: "sh run"
: Saved
ASA Version 8.2(2)
hostname csol-asa
enable password WI19w3dXj6ANP8c6 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.1.0 san_antonio_inside
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 1.1.1.1 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns domain-lookup inside
dns server-group DefaultDNS
name-server 24.93.41.125
name-server 24.93.41.126
object-group network NETWORK_OBJ_192.168.2.0_24
access-list inside_access_out extended permit ip any any
access-list outside_access_out extended permit ip any any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in_1 extended permit icmp any interface outside
access-list outside_access_in_1 extended permit tcp any interface outside eq pop3
access-list outside_access_in_1 extended permit tcp any interface outside eq 8100
access-list outside_access_in_1 extended permit udp any interface outside eq 8100
access-list outside_access_in_1 extended permit udp any interface outside eq 1025
access-list outside_access_in_1 extended permit tcp any interface outside eq 1025
access-list outside_access_in_1 extended permit tcp any interface outside eq 5020
access-list outside_access_in_1 extended permit tcp any interface outside eq 8080
access-list outside_access_in_1 extended permit tcp any interface outside eq www
access-list outside_access_in_1 extended permit ip san_antonio_inside 255.255.255.0 any
access-list outside_1_cryptomap extended permit ip 192.168.2.0 255.255.255.0 host san_antonio_inside
access-list outside_1_cryptomap_1 extended permit ip 192.168.2.0 255.255.255.0 san_antonio_inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 san_antonio_inside 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (inside) 2 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface pop3 192.168.2.249 pop3 netmask 255.255.255.255
static (inside,outside) tcp interface 8100 192.168.2.161 8100 netmask 255.255.255.255
static (inside,outside) udp interface 8100 192.168.2.161 8100 netmask 255.255.255.255
static (inside,outside) udp interface 1025 192.168.2.161 1025 netmask 255.255.255.255
static (inside,outside) tcp interface 5020 192.168.2.8 5020 netmask 255.255.255.255
static (inside,outside) tcp interface 8080 192.168.2.251 8080 netmask 255.255.255.255
static (inside,inside) tcp interface www 192.168.2.8 www netmask 255.255.255.255
static (inside,outside) tcp interface 1025 192.168.2.161 1025 netmask 255.255.255.255
access-group inside_access_out out interface inside
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 2.2.2.2 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map1 1 match address outside_1_cryptomap_1
crypto map outside_map1 1 set peer 2.2.2.2
crypto map outside_map1 1 set transform-set ESP-3DES-SHA
crypto map outside_map1 interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.2.30-192.168.2.155 inside
dhcpd dns 24.93.41.125 24.93.41.126 interface inside
dhcpd domain corporatesolutionsfw.local interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
group-policy DfltGrpPolicy attributes
tunnel-group 2.2.2.2 type ipsec-l2l
tunnel-group 2.2.2.2 ipsec-attributes
pre-shared-key *****
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:021cf43a4211a99232849372c380dda2
: end
Site A sh crypto isakmp sa:
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 2.2.2.2
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
Site A sh ipsec sa:
Result of the command: "sh ipsec sa"
interface: outside
Crypto map tag: outside_map1, seq num: 1, local addr: 1.1.1.1
access-list outside_1_cryptomap_1 extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.2.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (san_antonio_inside/255.255.255.0/0/0)
current_peer: 2.2.2.2
#pkts encaps: 1, #pkts encrypt: 1, #pkts digest: 1
#pkts decaps: 239, #pkts decrypt: 239, #pkts verify: 239
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 1, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 1.1.1.1, remote crypto endpt.: 71.40.110.179
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: C1074C40
current inbound spi : B21273A9
inbound esp sas:
spi: 0xB21273A9 (2987553705)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1691648, crypto-map: outside_map1
sa timing: remaining key lifetime (kB/sec): (3914989/27694)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0xC1074C40 (3238480960)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 1691648, crypto-map: outside_map1
sa timing: remaining key lifetime (kB/sec): (3914999/27694)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Site B running config:
Result of the command: "sh run"
: Saved
: Serial Number: JMX184640WY
: Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
ASA Version 9.2(2)4
hostname CSOLSAASA
enable password WI19w3dXj6ANP8c6 encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 2.2.2.2 255.255.255.248
ftp mode passive
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network mcallen_network
subnet 192.168.2.0 255.255.255.0
access-list outside_cryptomap extended permit ip object NETWORK_OBJ_192.168.1.0_24 object mcallen_network
access-list outside_access_in extended permit ip object mcallen_network 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static mcallen_network mcallen_network no-proxy-arp route-lookup
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 2.2.2.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto map outside_map3 1 match address outside_cryptomap
crypto map outside_map3 1 set peer 1.1.1.1
crypto map outside_map3 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map3 interface outside
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh stricthostkeycheck
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.200-192.168.1.250 inside
dhcpd dns 24.93.41.125 24.93.41.126 interface inside
dhcpd domain CSOLSA.LOCAL interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
ikev1 pre-shared-key *****
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4e058021a6e84ac7956dca0e5a143b8d
: end
Site B sh crypto isakmp sa:
Result of the command: "sh crypto isakmp sa"
IKEv1 SAs:
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 1.1.1.1
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
There are no IKEv2 SAs
Site B sh ipsec sa:
Result of the command: "sh ipsec sa"
interface: outside
Crypto map tag: outside_map3, seq num: 1, local addr: 71.40.110.179
access-list outside_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
local ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.2.0/255.255.255.0/0/0)
current_peer: 1.1.1.1
#pkts encaps: 286, #pkts encrypt: 286, #pkts digest: 286
#pkts decaps: 1, #pkts decrypt: 1, #pkts verify: 1
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 286, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 2.2.2.2/0, remote crypto endpt.: 1.1.1.1/0
path mtu 1500, ipsec overhead 58(36), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: B21273A9
current inbound spi : C1074C40
inbound esp sas:
spi: 0xC1074C40 (3238480960)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 28672, crypto-map: outside_map3
sa timing: remaining key lifetime (kB/sec): (4373999/27456)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000003
outbound esp sas:
spi: 0xB21273A9 (2987553705)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 28672, crypto-map: outside_map3
sa timing: remaining key lifetime (kB/sec): (4373987/27456)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001

Hi Keegan,
Your tunnel is up and encrypting traffic one way, the other end is not able to encrypt the traffic.
I would suggest to do a 'clear xlate'? Sometimes if you setup the nonat configuration after you've attempted other configurations, you need to 'clear xlate' before the previous NAT configuration is cleared and the new one works.
HTH
"Please rate useful posts"

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

Page zoom not holding between pages in FF4

Back in good old FF 3 page zoom would hold between pages or on refresh, I am finding with FF4 every time I reload a page or click a link to a different part of the same website I need to re-size the page, as I use FF for its zoom function this is starting to get a bit frustrating, anyone know how to fix it?
Much appreciated

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

See Terence Devlin's thorough explanation here.

Call does not work between two SX80

Hello,
I have two SX80 TelePresence Devices installed on same Network. I want to make call ( IP to IP ) between two Sx80 and the Result was no call Establish between them.
Are there any configuration required to do it from my side to add to the SX80?
Note: this two SX80 WORKING stand alone ( No CUCM or MCU).
Warm Regard,
Idris

Log in using SSH and ping one from the other to see if they can see each other, also ensure CallSetUp Mode is set to "Direct" and set default call protocol to H.323.
/jens
Please rate replies and mark question(s) as "answered" if applicable.

My printer is not taking hold between two print ? What Do i do ?

Similar Messages

Maybe you are looking for