My printer keeps printing out a file summary page every time I print something?!

HP Photosmart Plus B210- Every time I print anything, the printer spits out a summary page of the file I'm printing...wasting paper and ink!  How do I get it to stop?!  I've already re-installed the software and that didn't work...

Hi,
Are you printing from Word ? If Yes, please try this:
Click the 'Office Button' (top-left corner of the window) then 'Print'
Click 'Options' (bottom-left corner of the print window)
Choose the 'Display' section
Untick 'Print document properties'
Click OK to all the windows and you're done
Regards.
Source: http://www.wayne-robinson.com/journal/2008/1/24/stop-printing-document-properties-summary-page-in-wo...
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My lightroom keeps defaulting to add serial number page every time it opens. I have a number and registered it but for some reason not excepting it

    Does anyone have any solutions?
    Thanks

    Hi alexsandra2,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Resetting and/or restarting the device are good first troubleshooting steps.
    iPod won't turn on
    http://support.apple.com/kb/TS1383
    Cheers,
    - Judy

  • How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    This occurs when the printer is not aligned completely.
    Please follow the steps mention in the link below to resolve the issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
    Please mark the post that solves your problem as "Accepted Solution"
    Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

  • LPX file size grows every time I save (with almost no changes) - WHY?

    Hi all,
    I am just now starting to move from Logic 9 to Logic Pro X. I first imported a very simple file from logic nine as a folder project and did not import anything except the file.
    - Then, I immediately saved it.  took more than 30 secs on core i7 - why so long?
    - next I "saved a copy as" file 1a - file size 700k - nice and small.
    - that I loaded the first logic X file back in and muted a few things and saved again
    - I made some other very minor changes like muting and re-saved three or four times.
    Here is what is strange –
    Original file = 1 MB
    main LX file was 2 megs and each subsequent save gained about 1 MB each time I hit save! So, the final grew to 6 MB after just a few saves!
    I checked to see if there was some large edit history file I could purge – but it was empty because all I had done was change some mutes…
    Q: what is going on with this large file size growing every time I hit save without any major changes – I would like to know what's going on.

    It has to do with undo history, backups, and autosaves.  You can see these if you right click on the file and show package contents.  Explore in there and you should see these growing in the alternatives folder.  I would imagine there is kind of a limit to how many of these there are, but haven't looked to closely at it.

  • ITunes Match asks me to sign out and sign in again every time I attempt to update.  How do you fix this problem?

    iTunes Match asks me to sign out and sign in again every time I attempt to update.  How do you fix this problem?

    My problem is it asks me to sign out and back in every time I try to update ITunes Match. And it won't let you add a new song to a playlist unless it's updated on Match. So every time I add a song I have to sign out and back in just to put it on a playlist.  I saw this issue on the internet but no solution.
    Very sorry I did iTunes Match.  Shuffled my playlists without asking and this additional extra work just to add a song to a playlist.  Not impressed - at all.
    I do thank you for trying.  Surprised Apple doesn't monitor this stuff and step in and provide a fix.  Left to our own devices.  Thanks Apple!

  • Safari signs me out of a web page each time I open a new tab within a web page I am already signed in to

    How can I stop Safari from signing me out of a web page each time I open a new tab within a web page I am already signed in to?
    This is very annoying, how can I stop this??

    Extensions.
    1. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    2. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click “Remove All Website Data”.

  • TS1702 Have the game "The Simpson's tapped out" on Ipad and now every time you touch a character, it jumps out, not even generating the money collected, thus having to do this over and over again! Now, look on itunes for the game itself & not there!?! Hel

    Have the game "The Simpson's tapped out" on Ipad and now every time you touch a character, it jumps out, not even generating the money collected, thus having to do this over and over again! Now, look on itunes for the game itself & not there!?! Help!

    I can not find out a way to finish this game.....Is
    there anyone can help me?You can finish the game by calling System.exit(0).
    Have you found a way to start the game?

  • I keep having to install flash player 11 every time i play games.whats wrong?

         Almost every day i am playing one zinga game or another.during an upload of an game it will freeze and i will be asked to download the newest adobe flash player so the game will function properly.the rest of that day every thing will be fine.the next day the same thing will happin again.the download always works fine and the games all function fine after the download.this has happined four times now.i am an little confused and concerned.

    windows seven with all of the up dates to this time point.i use
    internet explorer ie9.but i also use google chrome and am finding my game play to work just fine on google.also i was just trying to take an survey and the site told me that i did not have the latest flash player installed and was asking me to download it.that would make it about eight times now.
    From: ʇɐb ɹəuəllıʍ <[email protected]>
    To: prhuds00 <[email protected]>
    Sent: Tuesday, November 8, 2011 5:09 PM
    Subject: i keep having to install flash player 11 every time i play games.whats wrong?
    Re: i keep having to install flash player 11 every time i play games.whats wrong? created by ʇɐb ɹəuəllıʍ in Installing Flash Player - View the full discussion
    What is your operating system & version?
    What is your web browser & version?
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015076#4015076
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015076#4015076. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Installing Flash Player by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My mac keeps talking to me every time I do something

    my mac keeps talking to me from a black box every time I do something.

    Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
    (98338)

  • C3180 is printing 2345x in top left corner of blank pages every time i print

    Every time I print anything from my Mac Book Pro (running Mavericks 10.9), my C3180 spits out a page with 2345x printed in the top left corner of an otherwise blank page.  Wasting my paper and my ink.  
    Anyone have any suggestions?
    This question was solved.
    View Solution.

    Thanks all for the information.  We are taking a look at what this might be.    Is it printing this out on a single sheet after the desired print, or on the same page or a combination?  Any additional details will greatly help trying to track this issue down to root cause.

  • I have a psc 1510. how do i get it to not print a test page every time i turn it on?

    I would like the PSC 1510 to NOT print up a test page automatically every time I turn the printer on. I don't do a great deal of printing, so I don't want to waste paper by having an extra page printed up evry time I want to just print up a couple of pages. Is there a way to disable this test page at startup?
    I am using the PSC 1510 on a Mac, OS X 10.6.8.
    This question was solved.
    View Solution.

    Hi there owen13,
    This sounds like the alignment page needs to be scanned. This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printing with Gray background on entire page every time I print through Elements 12

    Every time I print a photo in photoshop, a gray background appears on the entire page of the printed paper (except for 1/4th of an inch margin on all sides.)  This does not happen when printing from iPhoto so I assume it is a preference in photoshop or in my driver/printer settings?  I am set up for sublimation printing and with an ICC profile from Conde Systems.  I work in RGB mode and use the specific color profile downloaded by Conde.  
    I have a feeling that when I set up my settings, I somewhere marked the "hard settings" or "default" background color to print in WHITE…which is somehow translating to gray when I print (this is just a guess.) I am thinking that a setting of mine  is off yet I have no idea where to change it.    If I open a new doc, specify that I want the background transparent, it will print without the gray box!  However, if I open an image and simply hit "print" - the entire page is gray - which is wasting tons of ink.  Creating the new doc and placing the image on that doc and then printing it is a fine temporary solution to the problem but it is not conducive to my business.  Anyone with any knowledge on this  situation would be a lifesaver.   Happy to provide any additional details needed!!!
    Please offer any insight you have - this has been driving me crazy for weeks!!
    Thanks in advance.

    The troubleshooting steps in the document here may help resolve the alignment pages printing on your Photosmart c4485 printer.  Do both cyan and black print properly on the alitnment page?

  • HELP!!! Safari keeps going to start of page every time I scroll down

    Every time I go to a web page and start to scroll down, BIG DUMB SAFARI will go back to the top of the page.  I noticed this happend after BIG DUMB APPLE did an update about 2 months ago to OS X Mountain Lion.  Any help would be greatly appreciated.
    Thank You!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Reconnecting Referenced Files...every time I use the program! Help!

    Every time I use Aperture, regardless of any outside variables I change, it inevitably unlinks nearly all the photos in my library, or will keep a third linked with no rhyme or reason. I've tested every variable I can think of, stopped using spaces, sent heated emails to our friends at Apple...nothing seems to make a difference. The program is a technological equivalent of a brick 50% of the time I open it.
    These photos are on my main hard drive, not an external disk that gets put to sleep. This problem has occurred while I was in the middle of using the program, switched to finder, switched back.
    Has anyone else had a problem with Referenced Files coming unlinked? Or Can anyone suggest an alternative program to Aperture that actually works?

    Ok, two things I've figured out with 10.5 and Aperture:
    - If you use Spaces, it will eventually cause your referenced images to become unlinked.
    - If you hide or minimize Aperture, it will eventually unlink the album you are working on, and eventually your entire library. Sometimes this problem can be fixed simply by restarting Aperture, but other times, if you let it sit for too long or your computer goes to sleep in this way, your whole library may come unlinked.
    I (so far) haven't had any problems with this since I stopped hiding the application. It is a bug, but at least in my case I'm able to work around it by always keeping the window open if the application is open.

  • Same Files are  Updating Every Time I Sync

    Hey I was wondering if anyone could help me out. Every time I plug my iPhone in to sync the same 169 music files update through iTunes. I was wondering if there was anyway to stop this being that it's taking so long to sync because of this.

    I beleive it should be possible to check the "manually sync" option for your iPhone when it is plugged into your Mac. Once that's done, you can decide which files (songs, contacts, apps, etc.) you want to synce whenever you connect.
    I have this option checked for my iPod, which saves it trying to sync EVERY thing in my iTunes library - too much to fit onto it. Great when you know that you haven't updated certain things and want to skip that part!
    Cheers,
    Kevin

Maybe you are looking for