My printer kicks all my other wireless devices offline when I connect it to my new router.
I have the 6500 wireless printer (e709n model). When I connect my printer to my home network it kicks all other devices that are connected offline (laptops, desktops, ipad, ipods, etc.). If I turn the printer off and reset the modem then all those devices can connect again but the printer isn't. I've tried numerous times and each time the printer is turned on and connected to the router I have the same result. I am using a Net Gear router (model N900). Anyone seen this before?
Herculean,
Thanks for sharing that post.
Definitely some great tips.
That was the direction I was headed in and hope it resolves the issue at hand.
Another step that can help is to set a static IP address in the printer itself. The steps for this can be located by clicking on Support & Drivers at the top of this page and entering your product model. Once the support page for your printer loads, select Solve a Problem and then Wireless Networking. The steps should be located in a document that is titled Printer Does Not Maintain a Wireless Connection (wording may be slightly different).
The trick here is to either leave the DNS servers blank or to use Google's public DNS servers (8.8.8.8, 8.8.4.4) instead of the router as a DNS server. I have seen this resolve similar issues, though they are rare.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
Why won't my iMac print consistantly to my compatible HP 6500A? I've checked for updates and downloaded the lasted software...still can't print. All my other Mac devices find the printer but the iMac is hit and miss. I'm operating the Mac OS X Lion 10.7.
When you say hit and miss do you mean sometimes you print a whole document with no problems, or do you mean each document has problems? This is from HP's website for your printer:
Your sig says 10.6.7 but your message says 10.7. So if it's really Lion, this printer isn't officially supported. Elsewhere on HP's site it says updated drivers will be available on your Mac via Software Update. Have you run that recently? -
when i try to connect my ipod touch to my wireless network, its keeps saying the password is incorrect-this has been ongoing for several months now even though it used to connect when I first bought the ipod-is there anyway to reset the password?
All devices should automatically reestablish a connection after power cycling the router.
Also try resetting your iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try:
Apple - Support - iPod touch - Wi-Fi -
Video streaming of DRM movies, purchased from iTunes and other vendors, to any iOS device is not working.
I am not sure if you really understand the issue at hand. Possibly that you are just scanning, not reading the whole text, or simply that you just want to close a thread with your last words or derail it for whatever strange reason. So far you have been more destructive than helpful, but again this could be ignorance at best.
If you would have had the decency to read the entire thread you would have come to the conclusion that every manufacturer, I came across, has posted FAQ's to this issue but Apple. Find a short excerpt below:
SeaGate http://knowledge.seagate.com/articles/en_US/FAQ/006135en?language=en_US <http://knowledge.seagate.com/articles/en_US/FAQ/006135en?language=en_US> Playing DRM (Digital Rights Management) protected movies in Seagate Media App Information regarding remote streaming of DRM protected movies. Most forms of DRM (Digital Rights Management) will prevent playing movies on unauthorized devices or from remote storage hosted on wireless drives or NAS drives(Seagate Wireless, Seagate Wireless Plus, Seagate Central or Seagate Personal Cloud). Movies purchased from iTunes can be streamed to iOS 6 and iOS 7 devices which were authorized from remote storage (the video could be selected in Seagate Media App and would be played in a Safari browser), however in iOS 8 this has stopped working. A bug has been filed with Apple, however this functionality has not been restored. Therefore, DRM protected movies purchased on iTunes can no longer be played on devices running iOS 8.
SanDisk http://kb.sandisk.com/app/answers/detail/a_id/16668/kw/itunes <http://kb.sandisk.com/app/answers/detail/a_id/16668/kw/itunes> Videos purchased or rented from iTunes will not play in iOS 8 The SanDisk Wireless Media Drive and Wireless Flash Drive support streaming of DRM protected iTunes purchased movie content to authorized devices in iOS 6 and iOS 7 ONLY. The DRM protected content is opened in Safari where the DRM is decrypted and the video is played. iOS 8 issue In iOS 8 Apple device has NOT enabled Safari based DRM decryption. Therefore DRM protected content, i.e. purchased movies or TV shows from iTunes, CANNOT be streamed from the Media Drive/WFD in iOS 8. This issue has been reported to Apple. We do not have any estimated date when Safari will support DRM decryption of iTunes purchased content.
in contrast: here is the excerpt from the Apple Store http://store.apple.com/us/product/HFSQ2VC/A/sandisk-connect-64gb-wireless-media- drive?fnode=12ea113d2dba9883d5561c573d91…
Overview
With the SanDisk Connect Wireless Media Drive and its companion app, you're free to share and stream high-definition content between your iPad, iPhone, iPod touch or Mac devices without a cable connection. Simply connect wirelessly from your iOS device to the media drive and instantly stream your HD movies, browse photos and listen to music from around the house or on the go, while avoiding the common hassles of cables, attachment limits or Internet availability
AirStash http://support.airstash.com/entries/55924774-Known-Issues-with-iOS-8-and-or-iPho ne-6-6- <http://support.airstash.com/entries/55924774-Known-Issues-with-iOS-8-and-or-iPho ne-6-6-> (Excerpt) Known Issues with iOS 8 and/or iPhone 6/6+ Apple recently released iOS 8 and the iPhone 6 and iPhone 6+. Here are the remaining issues that we are aware of in the iOS 8 general release: • Video streaming of DRM movies (purchased from iTunes and other vendors): iTunes purchased videos and all DRM movies will not play on iOS 8 devices when streamed from AirStash (or streamed from other wireless devices). These movies are digitally protected and the AirStash app sends them to the Safari browser to play (which works for all prior iOS versions). However, in iOS 8, Safari will no longer allow DRM movies to play. These movies will play when the video is transferred to the iPhone/iPad and played in the Apple's Video App or the corresponding App from the vendor.
WD - A Western Digital company http://community.wd.com/t5/My-Passport-Wireless/Streaming-itunes-DRM-movies-to-s afari-on-iPad-not-working-IOS-8/m-p/820913#M387 <http://community.wd.com/t5/My-Passport-Wireless/Streaming-itunes-DRM-movies-to-s afari-on-iPad-not-working-IOS-8/m-p/820913#M387> No official comment here in regards to the issue but a interesting comment by Bill_S, WD Community Manager, who is basically saying that iOS8.x was actually a fix to an issue that DRM protected movies were playing prior to iOS8.x. If this is the case and Apple will not address this issue or fix it since Apple believes that movies should be protected this way, you need to let the community know that movies are restricted this way. Re: Streaming itunes DRM movies to safari on iPad not working - IOS 8 issue? [ Edited ] Options 11-06-2014 03:19 PM - edited 11-06-2014 03:22 PM Actually, this is not something we can NOT fix. It appears that Apple finally fixed an issue they had with their movie DRMs. The files should have never played in the first place. [Edit] If you have an issue with this, you will need to take it up with Apple. Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else. -
New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.
If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now. -
I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck -
Hi guys, please help, I'm desperate.
After an automatic update to my windows 8.1 yesterday none of my other other wireless devices like smart phones, tablets, etc. can join my wireless network unless my laptop is turned on. If I turn my laptop off, after a couple of minutes my iphone,
my wife's iphone and my Galaxy Tab lose connection and are unable to join my router's network. When I turn my laptop back on, all the other devices are able to use my router's wireless internet without any problems. How can I fix this???
Thanks.Hi,
First, I suggest to reset the router, meanwhile disable the network card and enable it again, because it is obviously network issue.
Then, as you post this happened after windows update, try to find the update that was already installed on your computer
Restore your computer by following the way listed below:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Hide the update if it is not an important one and related to wireless internet according to this article:
http://technet.microsoft.com/en-us/magazine/ff382716.aspx
I hope it works for you .
v-yamliu -
Do i have to reconnect all of my wireless devices if i creat a new network
Do I have to reconnect all of my wireless devices if I creat a new network with my new Time Capsule?
Not exactly sure what you mean.. if you create a new network using the same SSID and security as the previous network used.. then no wireless devices will need reconnecting.. but if it uses a new ssid..or different security settings.. (SSID is wireless name in apple speak.. ) then all wireless devices will need to be reconnected to work..
Or you might mean that both device are running in parallel.. and that is also fine.. bridge the TC and turn off its wireless. .then all devices that can connect to the TC will be able to..
There are 100 ways to skin the cat.. without knowing what you mean.. I have no way to answer other than the elves.. who always say yes and no. -
How to get iPod 4 to play wifi-nice with my other wireless devices?
Anyone has this problem? It's either iPod 4 or everything else!
I just bought a new iPod 4 in additional to my iPod 3. I doesn't feel as good as my current iPod, but that's beside the point. My iPod 3 is still the favorite, even before I found the problem.
All of my wireless devices at home work just fine:
. -Motorola Wireless Modem (set to g, wep sec)
. -iPod 3
. -Apple Macbook
. -Gateway laptop
. -Lenovo laptop
. -2 Sony laptops
. -Nokia tablet
. -HTC winmo phone
*iPod 4 join my Motorolla wireless
. +*ONLY IPOD 4 WORKS*
. +The following wireless STOP working
. -iPod 3
. -Apple Macbook
. -Gateway laptop
. -Lenovo laptop
. -2 Sony laptops
. -Nokia tablet
. -HTC winmo phone
*Poweroff iPod 4
. -All wireless devices work
*Poweron iPod 4, Airplane on
. -All wireless devices work
*Poweron ipod 4, Airplane off
. -All wireless devices work
*Poweron iPod 4, but not join Motorola wireless
. -All wireless devices work
How to get iPod 4 to play wifi-nice with my other wireless devices?
Message was edited by: iUserThanks again for you help. I finally got the music resting on my iPad moved into iTunes and then got the music resting on my iPod backed up in iTunes. Final step was to get the music on my iPad onto my iPod without loading the iPod music onto the iPad. I use my iPod strictly for music and don't want to clog my iPad with all those songs. Anyway, long process but it worked. Thanks again.
-
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later. -
I am trying to set up my daughters ipod touch after resetting it to factory settings. So I am trying to sign in using an apple id. It says won't connect to the servier, but I have other wireless devices connected, so I know my wi fi is working. What now? Thanks
Return it and get a refund. Without the prior owner's Apple ID and password that device is useless. Find My iPhone Activation Lock- Removing a device from a previous owner’s account. You were screwed by the ignorance of the pawn shop owner.
<Edited by Host> -
I want to use some Greek letters. I found the font "Symbols" which shows what I want but I cannot print in it. I can print in all the other fonts. What can I do?
To type Greek, go to system preferences/language & text/input sources and check the box for Greek, plus the box for Show Input Menu in Menu Bar, plus the box for Keyboard Viewer. The select Greek from the "flag" menu at the top right of the screen and type. Select Keyboard Viewer from the same menu to see which key does what. Do not worry about the font, that is taken care of automatically.
-
Time machine can't find wireless device despite strong Wifi connection
Every time I try to set up time machine, whenever it tries to find a wireless device it says "Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again." I already have a perfectly strong connection to my router so why does it keep saying that it can't find a wireless connection?
Bernard778 wrote:
I have the very same problem. MB recognizes my 2TB Verbatim when connected directly via USB and Time Machine goes to work. When I connect the HDD to my router, my MB sees the HDD in Finder, but Time Machine can't find it ("Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again.").
@Pondini - this is not a time capsule, I have a HDD on my WiFi network.
Hi, and welcome to the forums.
You have two problems with this setup.
First, Apple doesn't support backing-up that way. See this Apple article: [Disks that can be used with Time Machine|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html].
Second, backups done locally (when the HD is connected to your Mac via USB) are placed in a Backups.backupdb folder at the top level of the drive. When they're done over a network (Ethernet or WIFI), that folder is inside a +sparse bundle,+ and you can't easily switch between the two. -
My nook app keeps telling me "Please be sure you have internet connectivity, then try again." I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working. I have turn off my phone, signed off my wifi, installed a new app, but nothing is working. My friend is having similar issues. My phone is up to date. I even tried taking off the wifi in hopes that it could just connect to the 3g but nothing. Not sure if anyone else is experiencieng this issue or knows what I can do. I think that it may be an app problem that needs fixed, but not sure. Help!
Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?
Maybe you are looking for
-
I have an iPhone and use Roadrunner as my email server. When I open RR it gives me 4 choices, inbox, drafts, sent and trash. I would like to add saved, how can I do this. I contacted RR and they said it is an Apple problem to solve.
-
HELLO, 1. WHAT IS OSS. 2. EXPLAIN THE CONCEPT OF CTS. REGARDS BALEEQ
-
IPad and iPhone sync pictures problem.
When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the la
-
How do I change bbm back to older version??
Hi there, I just updated my bbm version from 7 to 8. I do not like the new bbm and I'm wondering how do I change it back to the 7.0.1.2.3 version?? I tried backing up my phone via desktop manager but it didn't change my bbm back Please help!!! Thanks
-
Java system properties in the command line...
Is it possible to know (at run-time) which system properties have been specified in the command line (using the -Dprop=value argument)? Actually I would like to avoid people running the JVM and using my program overwriting the user.name property. Tha