My printer no longer connects to the web...???

My HP Photosmart D110 All-In-One no longer has web capbility. I use it wth an HP Laptop with Windows 7 and a Dell with Windows XP.
Thank you!

Hello mkb,
When you are looking at your Internet connections or ( Wireless summary ) by going to the following.
-Tap on the silver Wireless button, Below the touchscreen
- go to Wireless settings
- from within there tap the right arrow and keep going until you see the Reset/Restore network Defaults, Tap ok when Highlighted.. and then Tap ok again on Yes when it ask's you " are you sure you want to restore the network defaults "
-also i would recommend turning you router off Whilst doing this to refresh it as well.
- let them restore and Reconnect the printer again with a fresh connection
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Similar Messages

I can no longer connect to the web

I've got an iPad 2, about 3 years old and I can no longer connect to the web. I do get e-mails, but they come when they feel like it. I don't have trouble getting on the web on my iMac. Thanks for your help and please answer as you would to any neophyte. Cheers

Are you properly connected to WiFi?
Is your iMac using the same WiFi?
What happens when you try to reference a WebSite?

After update to version 31, Firefox can no longer connect to the web.

After Firefox updated to v31 and I restated Firefox no longer can reach any website, while Chrome and IE continue to work fine.
Steps I have tried:
- rebooted Windows
- https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a&as=aaq
- https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?esab=a&as=aaq
- starting Firefox with "Add-ons Disabled" (Safe Mode)

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

N95 NO LONGER CONNECTS TO THE WEB

I have been using my n95 for about 6 months to browse the internet but 3 days ago when I tried to open my browser it did not work.Whenever I press my web button the screen simply refreshes & nothing else happens (there is no error message to say why it will not work).I have contacted my service provider whom I also have an internet plan for my phone through & they have said that everything is fine on their end so it must be the phone.I am really at a loss as to wot to do as I have not done anything to my phone (no updates,no new applications) that might have caused this.If anyone has any ideas or solutions I would greatly appreciate it.

nvm I just did a HARD restart & it fixed the prob

Can't setup the Web Services as printer says "cannot connect to the server to get the update"

Just purchased and am setting up my HP Officejet pro 8600. It has set-up wirelessly without a hitch until I tried to install/enable the web services and I continue to get a message saying "the printer could not connect to the server" therefore it cannot check for an update on Web Services apps and they will not be enabled. Never had so much trouble setting up an HP printer in the past. Looks like this web services is more of a headache and a gimmick to sell this printer.

Hi Guys,
I found the solution after 2 days.
Open internet explorer and type in the IP address of the printer in the address bar then press enter.
The embedded web server of the printer should pull up.
C. Click the network tab near the top.
On the left side, click IPv4 under your connection type, wireless or wired.
D. Change the IP address from automatic to manual.
Enter the same IP address, default gateway, and subnet mask.
Enter 8.8.8.8 for the primary dns and 8.8.4.4 for the secondary then click apply.
E. After the apply button has been clicked to apply the static IP settings, enable Web Services.
Good luck

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Safari no longer connects to the internet

I upgraded to OS Yosemite in my iMac (must be approaching 4 years old) and everything has been working fine. Had a couple of applications where they closed unexpectedly, but nothing major and things have continued as they always have. Apps have also automatically updated. As of today, Safari will no longer connect to the internet and I keep getting the classic "the server unexpectedly dropped the connection" blurb and I kept being told that a disk that I hadn't put in the machine is not being recognized.
I'm typing this on my MacBook Air so I know that Safari can work fine (also having no problem with my iPad or iPhone) and there is no issue with my ISP' modem (I'm with Virgin Media), connector or Netgear wireless router. Tonight I have performed a recovery install and now I have this annoying message saying how I need a particular Java plugin, which I can't sort out because Safari can't connect to the internet. I have also performed a router reset, without remedy.
Logically, as I see it, the issue lies with Safari, and due to it being the only internet access on my iMac, I can't even download Firefox or access the App Store so looks like I can't update. A friend is also having the same issues with his iPad, so I know this isn't just my iMac
Looking for some answers here? Anyone?
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Thinkpad Twist s230u: Can no Longer Connect to the Internet

Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

I just started to have similar problem. I cannot connect to interent via ethernet or wifi. Both connections show I am connected, but cannot acces any web pages. It is like it is not connected. I would like to know how to restore back to when I bought it, 12/20/13, and then re-load the Windows 8 pro that is somewhere on the partition HD. Any help out there?????? All my other devices/laptops/computers work fine on the internet.
Stadtusquo
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid
ingschan wrote:
Hello,
Several days ago my Lenovo Thinkpad Twist suddenly stopped connecting to the internet. I was at the cafe using my phone hotspot and everything was fine, but then when I got back home, it could not detect any wireless networks in my house. I thought it may have just been my wi-fi but my phone could connect to the wi-fi just fine. I tried plugging in my phone again for personal hotpot and it could detect my phone, but no longer connect to the internet (it'd say that it's connected, but no pages would load). I tried rebooting my computer, but the wireless networks still could not be found and my phone's hotspot could no longer help it connect to the internet. I tried a Malwarebytes Scan but that didn't detect anything, and my McAfee virus scanner is not gonna help me find anymore viruses (long story as to why I don't have a better virus protection).
Can't really install any updates since I can't connect to the internet at all...rebooted several times to no avail...
Any sort of help or ideas would be greatly appreciated! Thank you so much!
Sincerely,
Ingrid

WRT54G ver. 6 can no longer connect to the internet after reset

I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
if not Easy Link connect didnt work then you need to do the configuration manually.
1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
4. access router. open IE, then type in http://192.168.1.1 on address bar.
5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
6. power cycle devices again. try to go online
note: if you dont have latest firmware. try updating if needed
Message Edited by whodas on 11-07-200601:28 PM
it is EVIL enough for GOOD men do NOTHING.

Why can't I no longer connect to the Internet via my AirPort Extreme Base?

I suddenly can no longer connect to the Internet through my AirPort Extreme. Everything was fine until this morning. My Base Station is connected to a DSL modem and then my computer connects to the Internet wirelessly through the Base Station. The center light is on in the Base Station. The left light flickers telling me there is wireless activity. I can still access my printer through the Base Station. But the right light is no longer flickering. I have rebooted everything several times. Does anyone have insight into this problem. This is the second time this has happened. For over a month I could not access the Internet through the Base Station, and then suddenly and arbitrarily it started working again. This morning it just stopped again.

I've had the same problem - mine started after I upgraded to 10.4.8 on my MacBook a week or so ago.
I can see other networks around my home and when I travel, but can only connect via ethernet cable (and my ISP is comcast - I thought the upgrade was supposed to help make connecting with comcast better).
My G3 has no problem connecting, so I don't think it's exactly a problem with my modem, or base station, or even comcast. I think it has something to do with my base station and upgrading to 10.4.8. Btw, dropping back to 10.4.6 hasn't helped.

Officejet 7310xi All in One Printer no longer connects wirelessly

Hello all,
My Officejet 7310xi All in One Printer no longer connects wirelessly.
The printer does no show up while searching for it wirelessly where it had previously.
In the past it would say that the printer (HP Series 7300) was offline. I would remove the device through the control panel and search again. A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device. I would default to the new printer icon, Copy 1, and it would work. This happened over the course of a year without any problems.
Now nothing is working. The printer can't be found by my network. I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
Although the printer has a built in network set up option, it has no installation wizard. I can't find a way to activate the wireless feature/icon. There is no I.P. address either.
I feel like a monkey pulling levers for a banana! I appreciate your help.

Hey @Kathlanta ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
By the end of this I want you feeling more like this;
Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
Look forward to hearing back from you! Have a good one!
I worked for HP.

E1000 won't connect to Cisco Connect or the Web based set up

My router is working fine but I cannot connect to Cisco Connect or the web based advanced features now. I know I broke the cardinal rule by using advanced set up so that explains why Cisco connect won't work. But I can't figure out why I can't connect to the advanced web based utility now. Who made the decision to put some features in cisco connect but not include those features in advanced settings? And then if you use advanced settings cisco connect no longer works. This is such a turn off I'm actually thinking about returning the thing to Best Buy. That's like saying "if you open the hood of your car and touch anything parts of your car will no longer function". I call support and they repeat what they read on paper "reset the router and start over and don't use advanced settings". What a pain in the &^%$.

I've reinstalled the router again and just switched the ssid and password where it was before so all the devices in our home can connect. I first shut down the guest account using Cisco Connect (which is the only place you can control the guest account) and now I just use the advanced settings. So of course Cisco connect no longer works. I've got a strong signal all over our home. No disconnection issues at all. But this software design that puts some features in one part and other features in advanced and then shuts down cisco connect if you use advanced is insane. If I knew cisco was planning a firmware upgrade to give the advanced mode everything cisco connect has and more then I'd keep this thing. For the life of me I cannot understand why any software engineer would come up with such a design as this. And quite honestly I tried to play by their goofy rules of not using advanced settings and cisco connect died after about 4 uses. Never would connect again. Just said call support (in India) and after telling your life's story to someone simply being told to hit the reset button, power off and start the process all over again. If anyone at Cisco reads this stuff I think I have a legitimate complaint. Why on earth would you put features in Cisco Connect that aren't in advanced and why would you stop running Cisco connect just because I hard coded some mac addresses in advanced mode? I would love to know the logic behine such a crazy implementation of software.

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Printer is not connected, yet the cord connects the printer to the computer

printer is not connected, yet the cord connects the printer to the computer, HP Office jet 6700, computer Mac OSX 10.9.4

Hello jbsarts,
Welcome to the HP Forums.
I see that you are having an issue with a connection error.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. The document may have "Scanning" in the Title, but it will troubleshoot the issue just the same.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My printer no longer connects to the web...???

Similar Messages

Maybe you are looking for