MY PRINTER NOT OPERATING

the printer not connect to the pc , the screen only flashing weith error C4EBA341.?

Hi @falcon13 , and welcome to the HP Forums!
I see you are experiencing printer errors. I would like to help!
I would recommend removing the ink cartridges, and perform a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also recommend following the steps laid out in this doucment:
A 'Carriage Jam' Message Displays for HP Photosmart 5520 e-All-in-One and HP Deskjet Ink Advantage 5...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Receiving printer not responding on computer screen. Unplugged, reinstalled wi-fi printer...nothing.

Cannot get printer to respond. One computer will print, the other gets printer not responding message.
We have reinstalled the printer, unplugged everything to no avail. Anybody have a solution?

Hi, Sora!
So that the Community can help you better, we will need to know exactly which operating systems are running on your computers, and which applications you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to fix this error: "Scanner is Not Operating Correctly"

My MP830 (purchased in 2006) will print from my computer but nothing will print or scan when placed on the scanning bed. The error is: "Scanner is not operating correctly." How can I fix this? I do have the Set Up CD-Rom with the Driver, Application Software, and Manual on it and the other identifyers on the disk are: USCD 1.1 QH7-2342
I am not very tech savvy and would like to get this scanner working properly. Help please.
BurninToLearn
Solved!
Go to Solution.

Hello!
So that the Community can help you better, we will need to know the version of Windows or Mac in use.
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Why does my cell phone say printer not supported

I am trying to print from my android phone and my cell phone says printer not supported.
I have a HP 5510 photosmart printer

Hi maddymel39;
I hope you are doing well
what cell phone do you have?
What version of the Operating system is in the phone?
What application are you using to print? provide this information and I will do my best to help you.
Regards;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Printer not mapping on client pc

Hi,
Printer not mapping on client pc, and am manually add network printer but error message is getting like this..
Windows cannot connect to the printer. There is not enough memory to complete this operation. please close some programs and try again.

Hi，
Try update your printer driver to newest version for good measure.
To me it appears like Vista's IRP Stack size is in error and gives those out of memory errors. I already checked the parameter in Windows 7.
Many similar cases have been resolved with the help of this. Hope it helps you too.
“Set in the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
The default value of the IRPStackSize parameter is 15. The range is from 11 (0xb hexadecimal) through 50 (0x32 hexadecimal).
If the subkey is not present, you can use Registry Editor to add the subkey. To do this, follow these steps: 1.Click Start, click Run, type regedit, and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
3. Click Edit, point to New, and then click DWORD Value.
4. Type IRPStackSize, and then press ENTER to name the value.
Note Type IRPStackSize exactly as it is displayed. The value name is case sensitive.
5. Click Edit, and then click Modify.
6. In the Data Value box, type the value that is appropriate for the network, and then click OK.
If the problem persists after you complete this procedure, increase the value of IRPStackSize even more.”
https://support.microsoft.com/en-us/kb/285089/en-us
It is an old KB article which applies to Windows XP, but same solution has resolved many I/O problem in Windows VISTA, 7, 8.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Printer not compatible with OS X Tiger 10.4? Help!

Hi there,
A few months ago I bought a Konica Minolta Magicolour 2400W laser printer (in a panic, was the cheapest available - in order to print my thesis). I have since bought an Apple Mac ibookG4 running OS X Tiger 10.4. Konica Minolta tell me that this printer is not compatible with the Mac and that I can't use it. So, my current situation is that I have a £200 printer that cannot communicate with over £800 worth of new Apple equipment. I am slightly P**d off. I probably should have done my homework but didn't expect a brand new printer not to have drivers compatible with a brand new computer + operating system. Short of selling the **** printer and getting a Mac-compatible one; what can I do? Please help, any suggestions would be most appreciated.
Zoe, UK
ibook G4 Mac OS X (10.4.2)

Looking at the Konica Minolta web site it lists only Windows support for this model.
http://printer.konicaminolta.com/support/currentprinters/mc2400wsup.htm#Drivers
So looks like the advice was right. The Minolta 2430DL and 2450 network models do support Macs so perhaps that is the confusion.
The only option looking around is to try Foomatic-RIP for Mac OS X and EPS Ghostscript in order to use the open source driver. Checking the Linuxprinting.org web site there is indeed a working driver for your model.
However it is only a 'Filter' which will need to be compiled to work with the above. Not a straightforward exercise I am afraid. I have found a recent thread which deals with this exact same model and perhaps you could try it yourself if you feel brave, or perhaps contact the guy posting the request and ask if he can send it if he manages to compile a working version.
The relevant thread is here:
http://www.linuxprinting.org/pipermail/macosx-list/2005q4/001449.html
If you want to have a go here is what you need to get started.
1. So, firstly go to this web site and read the Usage guide:
http://www.linuxprinting.org/macosx/foomatic/#usage
You can download the latest version of the required applications on that page too. Follow the instructions carefully.
Note that it says here that if it is just a 'Filter' then you will likely need to compile it which seems necessary.
2. Go to this web site and download the m2300w-0.51 driver which also supports the 2400W
"The m2300w driver is a Linux printer driver for the Konica Minolta magicolor 2300W and 2400W color laser printers. It is intended for being used in conjunction with ghostscript, foomatic and CUPS."
http://sourceforge.net/projects/m2300w/
Good luck!
Simon
Powermac G4 Dual 1Ghz MDD Mac OS X (10.4.3) 1.25GB

MG3520 printer not responding

It worked then I got a new internet provider it gave me the error message but I reconnected and it worked. Now it won't? Same message Printer not responding but it shows up as ready?
Solved!
Go to Solution.

Hi 69maverick,
We recommend reinstalling the drivers and software for the printer using the latest drivers from the Canon USA website to get your printer reconnected to your network. Please click here to go to the Drivers and Software page for the PIXMA MG3520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the Full Driver and Software Package file, please double-click on the file and follow the steps provided to reinstall the printer wirelessly.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT3771 printer not responding

I have problems printing. Print one document then get message saying printer not responding. All equipment is on and Hub is all lit. Any hints? Also tried printing from I Phone and no joy.

For further assistance, I will need some further information:
1. If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link.Whatsmyos.
2. How the printer is connected Wireless, Ethernet, or USB.
3. If the printer is able to make copies by itself. (Place a sheet of paper face up on the feeder, and select Copy instead of Scan).
4. If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Canon pixma mx850 printer not reading my computer - will not print

canon pixma mx850 printer not reading my computer - will not print
I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
I've tried all the trouble-shooting suggestions to no avail.

Hi scheideckerj,
Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing. Please click here to go to the Drivers and Software page for the PIXMA MX850. Once on the download page, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Since I have update to Lion I have my print not scanning .My classic FTP not supported anymore

Since I have update to Lion I have my print not scanning,. My classic FTP not supported anymore!!!! what is goin on with this update??????

Recover the backup you made before you installed. If you didn't backup, make a backup down, and selectively recover pieces of the backup that will work with the older operating system after erase and reinstalling 10.6. See my backup FAQ*:
http://www.macmaps.com/backup.html
Before you do, you may find your scanner preferences in your printer just need to be set in the Print & Scan preferences in Apple menu -> System Preferences, or some open source scanner and printer drivers can work better*: http://www.macmaps.com/printersx.html
http://www.macmaps.com/macosxnative.html#SCANNER
And in the future ALWAYS backup your data before you install anything. That way you can recover where you went before. Don't cross post in the forum if you can avoid it. Remember this is a user to user forum, so responses may take awhile if you didn't post in an area that really is related to your question. Issues with Lion are best handled in the Lion forum. But as long as I have a chance, I'll respond to this thread.

Why do I keep getting default printer not supported?

I have had my printer for aprox.three years without a problem, now I get default printer not supported and printer not activated error code 30

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printer not actually printing anything

Ok my printer is not printing anyhting on the paper. It was working one day and the next not. It pulls paper and sounds like its printing but all it does it pretend and spit out blank paper. I have tried unpluging from the computer and electricity and even removed device and reinstalled. Nothing I have tried has worked. Any suggestions.

Athanagild, I am sorry to hear you are having trouble, could you provide a little bit more information for the community? Knowing the model printer and operating system you are using could help narrow down troubleshooting. Other things like what application you are printing from and the steps you are using could be helpful as well.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Photosmart 7510 series printer (Printer not found)

My HP Photosmart 7510 printer was operating normal. Then when I tried to scan to the computer I got the following "The HP Photosmart series was not found." Then I received the following "The device you are trying to access has generated an error; Please ensure that the device has been properly confiqured." All of the other functions of my printer are working normally. It prints from the computer, it FAXs correctly (both transmitting and receiving) and copies. I have not made a changes to the system. What must I do to get the scanning function back?

Hello there! Welcome to the forums @trebor-340-ste ,
I saw your post about the scanning issue you are facing with your Photosmart 7510 and would like to try and help out! I thank you for letting me know you can copy and print!
Could you please respond with which OS you are running and I will research this for you.
In the meantime, please try a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly. If you are connected wireless on ethernet, also unplug your router for a minute before starting up the printer and computer.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

MY PRINTER NOT OPERATING

Similar Messages

Maybe you are looking for