My printer only prints in landscape form, it is set to portrait

my printer only prints in landscape form, it is set to portrait

Hi vicky611,
Does it print in landscape orientation exclusively from one program, or one device?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

Printing of landscape forms

Hi Friends ,
i am trying to take a printout from dotmatrix printer of smartform which is in made on A4 landscape . the issue is i'm getting printout in porttrait form only.
Note : Dot matrix printer have landscape papers only , no portrait papers
thank you for looking at this query.
please find ways to solve it.
kat...

done by basis cons

Trying to print a jpeg (not a photograph). No matter what setting i select, it prints in landscape. How do I get portrait printing?

Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?

kkbadobe wrote:
Trying to print a jpeg (not a photograph) in Elements 12. No matter what setting i select, it prints in landscape. How do I get it to print in portrait?
Second question. What is the fastest way to change the number setting (0 to 12) for an existing photo so that the file size is smaller?
Go to File>print in Editor. In the dialog that comes up, you should see "Page Setup". Select "Portrait".
This assumes that the file is in portrait orientation as well, before sending it to the printer.
As for question #2, I am unaware of a numeric sequence such as you would like in this program. You can alter file size via File>save for web, however.

Duplex printing of landscape form

Hello
I'm trying to print a form on both sides using landscape format. The back side is printed upside-down. Is there any proprty like 'Flip up/Flip over' in Adobe Live Designer?
Thank you very much in advance!
Regards,
Andrey

I have found property Duplex Mode in LiveCycle Designer (Edit->Form properies->PDF Print options). It contains options Duplex Flip Long Edge and Duplex Flip Short Side, but it works when you print from LiveCycle Designer only... The form is printed always like with Flip Long Edge...
Edited by: Andrey S on Jun 23, 2011 9:01 AM

HP officejet 4500 won't print in landscape.

I have many reports that I have to print for work and I cannot get the printer to print in landscape. I even go to page preview on my computer and it shows that it is in landscape, but when I go to print in prints only 1 column in portrait. What do I do? Please help! Thank you

I have this same printer and it will not print in landscape if it is selected for portrait unless i go into the control panel and change it like you suggested. When I change it to landscape it tries to print everything in landscape. It does not allow me to change when I click print then properties. Very annoying to have to do that every time i want to print a different layout.

Hp designjet 500 won't print in landscape in mavericks 10.9.1

Can't seem to get my hp design jet 500 to print in landscape for arch docs in 10.9.1? Any help? Have tried letting mac detect it and add to printers. Have tried downloading the driver from hp, still no luck. Ugh!

I have this same printer and it will not print in landscape if it is selected for portrait unless i go into the control panel and change it like you suggested. When I change it to landscape it tries to print everything in landscape. It does not allow me to change when I click print then properties. Very annoying to have to do that every time i want to print a different layout.

Cd jewel inserts not printing correctly-come out with only song name not artist and not in landscape form-hl

cd jewel inserts not printing correctly-only shows song title not artist and printing in portrait form where landscape form is required-pls help!

iTunes CD printing has been broken for several releases now. Some people have had success by directing the iTunes print output to a PDF file, and then printing the PDF.

Printing only first page landscape not portrait

Acrobat Standard for Windows v.8
When using Acrobat to print any PDF document, the first page is printed in landscape instead of portrait, the rest of the pages print as expected. This is reproduceable behavior on a single machine. Printing the PDF using other applications like InDesign or eCopy Desktop print as expected. Only Acrobat is exhibiting this behavior.
Acrobat has been reapired, uninstalled and reinstalled, printer drivers reinstalled with no success. The work around I have figured out (as a temporary solution so the user can print documents properly) is to select to print the PDF in landscape orientation in the print driver when printing from Acrobat, which prints the whole document in portrait orientation, essentially what was supposed to happen in the first place. This orientation change only seems to affect the first page and doesn't have any affect on duplex orientation.
Does anyone have a solution to this one? Or some direction? Thanks in advance.

Try one of these:
1/ In Adobe, deselect "Choose Paper based on PDF size" - you can leave the "Auto Rotate and Center" on.
2/ In Adobe, go into Advanced and choose "Print as Image".
3/ If this is a Canon H1 Fiery RIP, go into Printer Properties, Printing Preferences, Layout, Rotate 180degrees and choose "Large Paper Only."

I can't print my PDF form after it is filled out. Only the form prints not the text that I put in

I can't print my PDF form after filling it out. Only the form prints and not the text I put in.

That's a limitation of Apple's AirPrint framework that Adobe Reader depends on. We are considering an alternate solution that may resolve this issue though.
Thanks for your feedback.
-Gaurav

Adobe ReaderX will only print in landscape

I updated to adobereaderX (free version) in the last few days. Now all my pdf documents will only print in "landscape".
Word docs are not affected.
On checking, my Brother printer seems to be working fine and the printer orientation settings are correct (ie set to portraite).
How can I fix this?
Brother suggested I remove adobe reader and reinstal.

Are these documents created in landscape or portrait format?
What is your Reader/Print setting for landscape/portrait?

Documents only print in landscape mode even when portrait is designated. How do I fix this?

Documents will only print in landscape mode when portrait is disignated

How about changing the printer and printing something, then close Firefox and then restart your operating system? See if that helps ....
I am curious why you need two separate versions of the same printer installed. Is one used on a USB connection and the other part of a network configuration or wireless? If both are network or wireless, are they using a different IP address on the network they are on?
The only time I have seen a similar problem with Firefox not wanting to default to the "last used" printer was with a USB inkjet and a network connected laserjet (Brother) - the laserjet would go to "sleep" (energy saving mode) and Firefox would switch to the inkjet every time the laserjet was asleep. That problem was eventually solved when the USB inkjet was replaced by a "network" connected inkjet - still can't understand why that made the difference, though.

Acrobat 9 prints half landscape page from windows 7 home

Acrobat 9 reader prints to 1/2 page in landscape mode. The only way I could get it to print correctly in portrait mode, full page was to choose advanced print option and select "Print as Image". I have tried every combination of print dialog settings, updated my printer driver, updated acrobat, and nothing else worked. Every other application works fine except acrobat 9. How can I get acrobat to print a full portrait page without selecting print as image?

I also have this problem, and I am thankful you guys wrote to "print as image". I believe it is a glitch between Xerox printers and Adobe Reader/Adobe Reader X. I was hooked up to Xerox Phaser 8560DN-279 and all .pdfs were printing in half page, booklet form. I uninstalled and reinstalled my printer driver along with uninstalling and reinstalling Adobe Reader. Tried re-printing and it still printed in booklet form. I then attached my computer to an HP printer, and it printed fine, full 8.5x11. So I thought it was the printer connection. I then attached a 3rd printer to my computer, Xerox Phaser 8560MFP, and once again all .pdfs were printed in booklet form. So it seems to be to be a problem with adobe reader and xerox printers.

Printing custom size form

I am creating a PDF form with the following dimensions: H 8.5 in W 7 in. These values are set in Designer for the Master Page.
After opening the form in Acrobat Reader, I select the following options in the Page Handling area:
- Page Scaling: None
- Auto-Rotate and Center: off
Also, in the printer Properties, I select orientation as Landscape.
The Preview section looks like this:
But when I print this form (on paper that is 8.5 x 7), it prints the right side of the above image (1) , i.e. only right half of the form prints.
How do I force the printer to print the whole form (2)?

I am thinking that it is trying to resize the print to fit the default page size (in the printer of 8.5X11). I only chose the options that you had mentioned in the original problem.
Do you have Acrobat?
If so do a print to PDF and see if the page size is maintained.
Also when the file is opened in Acrobat/Reader look at the doc properties and see what Acrobat thinks the page size is.
Paul

Pages won't print in landscape?

I just upgraded to the latest version of Pages for iOS, and it seems I have lost the ability to print in landscape. Even if the document itself is in landscape orientation it still prints in portrait. In fact, documents that are in landscape orientation that printed just fine last week now print in portrait as well. Same documents, same printer, the only change is the Pages upgrade. Any ideas how to fix this?
Thanks!

Works OK with New Pages on iPad Air, iOS 7.0.4. using a Canon MG3500 printer via WiFi.
Portrait page was printed as Portrait, Landscape as Landscape.
First time printing from iPad.
As there were no Landscape or Portrait settings within Pages I'd check the printer settings.
Selecting the printer from the recent printer list seems to be built in.. I only have one.

How do I make a page print in Landscape?

Greetings,
I have a page which contains a form layout just for printing. I need to print it landscape. How do I do so?
We're on Application Express 4.1.1.00.23
Thanks, Tony

As far as I know APEX doesn't provide an iterface for maniging printer settings.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

My printer only prints in landscape form, it is set to portrait

Similar Messages

Maybe you are looking for