My printer prints all my photos red. Everything else prints fine. It printed photos fine before.

Does anyone know why this would happen?

Hi - Not sure which printer you have, so I'll give you a few general troubleshooting steps.
- Make sure that none of the ink cartridges are empty. If the cyan or yellow run out, you'll get a definite red/pink hue to the printouts.
- Verify that the paper type setting in whatever application you're using, matches the paper type you're using. From personal experience, I've seen red hues to everything when I've had the wrong paper type selected.
You might also run through the steps in this document to help narrow down the problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

Hi MIXAYA,
Thanks for using Apple Support Communities. In OS X, by default apps will open with any previously opened documents opening as well. To disable this feature, select "Close windows when quitting an application" from System Preferences > General. To learn more, see this article:
OS X Mavericks: General preferences
http://support.apple.com/kb/ph13803
Close windows when quitting an application
If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
Cheers,
- Ari

My MacBook was wiped of all my music and everything else, and now my iTouch is the only device with my entire music database. My iTouch is old. (Version 6.1.6, Model number: MC547LL/A) Is there any way I can put all the music on my iTouch onto my Mac

My MacBook was wiped of all my music and everything else, and now my iTouch is the only device with my entire music database. My iTouch is old. (Version 6.1.6, Model number: MC547LL/A) Is there any way I can put all the music on my iTouch back onto my MacBook? I hate that I could lose my entire music library by dropping my iTouch in the toilet.
I've tried to plug in my iTouch into my MacBook, but I can't seem to give the music-transfusion without subscribing to iTunes Match or just completely wiping my iTouch.
PLEASE HELP MEEEEE

Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a different setup you transfer the old library from a computer or a backup directly to the new setup, not the device to the library. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

When online in Safari the screen is gray/black transparent. Everything else is OK. Email is fine.

When I try to get online in Safari the screen opens gray/black transparent and I can not get anywhere. Everything else seams to be OK. Email is fine.

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Text in fields prints faintly, but everything else in the document prints fine

I am using Adobe Acrobat 8 Professional on a Mac. I am using a black and white laser printer.
In my work, I fill out PDF forms prepared by the federal government.
I can't modify the forms, because they are secure.
Filled-in text fields print so faintly (i.e., too light, not dark) that they are hard to read when printed. They don't look that great on the computer screen, either.
The form itself prints out excellently: nice and dark; easy to read.
Text entered using the typewriter tool prints out excellently, also.
Acrobat does not seem to allow the font in the text fields to be changed. It is some kind of Courier, and it never changes.
How can I get darker printouts from my text field entries?

Yes, that is not the best font choice. It's Courier New and this is a common complaint with this font. That particular form is not secured, but it is Reader-enabled. It is an XFA form, so it can be modified with LiveCycle Designer, which unfortunately for you does not come with the Mac version of Acrobat. If you want to go to the trouble of modifying such forms, you could do so on a Windows machine that has Acrobat Pro/LiveCycle Designer installed.

How do I get all my music, apps, photos, and everything else onto my new ipod?

Please Help! I just bought the new iPod touch (5th generation ios 6.1.2) and I'm trying to get all of my data from my 4th generation iPod touch onto it. So, I went on Itunes and backed up my old iPod and synced it, but when I plug in my new iPod it doesn't transfer any of my stuff . I'm getting really frustrated so please help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I reset my iPad 2 and I lost all my movies but everything else was on iCloud how can I get my movies back?

I backed up my iPad before I reset it and all my tv series and music and photos was on my iCloud but when I tried to redownload them from the purchased section but when I tried none of my movies I bought was there if there is anyone way I can get them back without buying them again tell me please!

If you are in the US then you should be able to download some or all of your films : re-downloading. If you are not in the US then have you not got them on your computer's iTunes and/or on a backup ?

I use Photo Viewer. Why will it not print in color?

I can not get Windows Photo Viewer to print in color on my Deskjet F335 All in One Printer. I have changed the print setting for color. It works fine on my old Epsom CX4800. I am using Windows 7 Home Edition

That fixed it for me: Windows 7 - Home Edition x64.
Long story short, it seems that the Windows Photo Viewer does not honor the printer's default preferences!
This was quite aggravating. I usually have the Printer's defaults set to Black-only in order to save on ink. When something calls for color (school project, photos) we set that only for the document being printed at the time of printing. When I ran into a series of grey photos with everything else set to print color, it was a surprise. Even reinstalling the HP 8600 printer again, using the same installed drivers, it continued to print only grey scale photos.

SapsScript Header is printed on all pages after change

Hello Experts,
I have made some changes to a sapscript. I added some output data to the header and expanded the lines by 3 LN. Now when I print the header is printed on all pages, but I only want it to be printed on the first... Any idea what could have done this?
best regards B

Hi,
The problem occurred because you have changed the variable window and what ever is mentioned in the variable window gets triggered when a new page gets triggered.
So.....
Change the Header lines what you have added, to main window from the variable window.
This will definitely solve the problem.
Regards
Sarves

Last page doesn't print correctly on 2 page 2 copy Windows 8.1 Wireless printing to HP4630

On Windows 8.1, when printing 2 copies of a 2 page document (any application) the last page of the last copy fails to print completely (sometimes half a page) or fails to print at all. It doesn't matter whether I am printing one sided ot two sided.
A blue alert box is displayed on the desktop with the message "Error printing on HP Officejet 4630 series... The printer couldn't print <file name>"
When I monitor the printing ("See what's printing"), the job disappears in the monitor just before the error message shows up. There is no indication in the monitor of any printing problem.
I've looked everywhere and can find no event logs that show this error.
Windows is totally up to date. The latest HP drivers are installed.
All attempts to use the various troubleshooting buttons in windows and the driver discover no problems.
When I print the same exact report in the same way from Windows 7 it doesn't fail.
I've tried it on 2 different 4630s on the same Windows 8.1computer with the same results.
Even though this appears to be a unique problem when printing from Windows 8.1, I need to get help finding out the exact nature of the problem and the error message.

Hi there @FrankCF , and welcome to the HP Forums!
I see you're running into print issues. I would like to help.
Does this issue occur when making a copy from the machine?
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I'm on itunes on a different computer and all my music and everything isn't here. How do i get it?

I'm on itunes on a different computer and all my music and everything else isn't here. How do i get it?

Copy it to disk or external drive or flash drive, then copy it to the other computer. You can type "move itunes library" into the google search bar.
You can transfer itunes purchases from an ipod: File>Transfer Purchases
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can`t finish watching movie after I`ve paid for it the next day, get ~content require HDCP for playback~, but everything else works

I`ve had a problem where I`ve purchased a movie via apple tv, watched half of the movie, then tried to watch he end the next day (before the thing expires), and i get a "...need HDCP for feedback", although everything else on the apple tv works fine (i.e previews of other movies, picks up comuters, netflix etc.

Thank you for your help. Now my notebook (gt60-2oc) is perfect. I am the happiest person in the world .
I followed these steps: topic=250946.0
And the file I used is this :
drive.google.com/file/d/0B5MQU_zcEPWTbTJjSkdlS01xc0k/view?usp=sharing
Thanks again to all .

Printing all my photos red

filled all color inks and still printing re photos

Hey @trish104,
Welcome to the HP Support Forums!
I understand that you're experiencing red print quality issues when printing photos to your HP Photosmart 6520 e-All-in-One Printer from your Windows 8 Computer. I would like to work with you today with resolving this print quality issue.
First, I'm going to have you print a standalone Print Quality Diagnostics report from your printer on plain white paper to see if this is a hardware issue on your printer or if this red quality issue is being caused by a setting on your computer.
How to Print a Print Quality Diagnostics report:
1. Load plain white U.S. letter or A4 size paper in the tray.
2. On the printer control panel, touch the Settings icon ().
3. Touch Tools, and then touch Print Quality Report. The printer prints the test page.
If the report prints perfectly: Than this issue is either caused by a setting on your computer or any photo paper that you may be printing your photos on. If you're printing photos on glossy or matte photo paper, can you try to print the report on that paper type to check the quality. If the report still prints perfectly, than this is a setting issue on your computer.
What program are you printing from on your computer that is causing the red photo quality?
Can you try to print the photo from a different photo viewer program on your computer to see if the issue still occurs?
If the report prints with print quality issues: Can you please click here to run through the step-by-step print quality troubleshooting document.
Please let me know if the steps I've provided resolve your quality issue. Should you still be experiencing issues, be sure to respond to this post with the print result of the Print Quality Diagnostics report and what program you're printing from on your computer. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

My psc 1315xi wont print all of a document. everything i try to print is missing parts of the doc

my psc 1315xi wont print all of a document. Everything I try to print is missing sections of the document. It will print a lot of the document with missing words or letters. Office Depot had no trouble printing the documents. The color seems to be off as well. It prints gray and not black. It will not copy or print a test page. When I try to run a diagnosis it says that it is not in my hp software(?).

Hi,
It looks like you've done some troubleshooting. The attached document link has additional troubleshooting steps to try. See if one of these tips helps.
Troubleshooting Print Quality Issues
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

My printer prints all my photos red. Everything else prints fine. It printed photos fine before.

Similar Messages

Maybe you are looking for