My printer suddenly stopped working. What do I do

I have an HP Officejet 6500, whichis not turning on at all.

Try rebooting the phone by holding both the sleep and the home button together until the apple logo appears and then wait for the phone to restart.  No data will be lost

Similar Messages

  • My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?

    My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do? iPhone 5

    Clean the lint/debris from the charging port and plug the cable in.

  • The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

    The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

    First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
    Best of luck.

  • HT4061 My iPhone5 suddenly stop working, what can I do to resolve the issue?

    I don't know what to do my Iphone 5 just suddenly stop working, wont turn or anything.

    Hi The Great One 365,
    If your having an issue where your iPhone 5 won't turn on at all, I would take a look at the Power/Battery troubleshooting in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    - Brenden

  • AuthenTec finger print suddenly stopped working

    Hi,
    Suddenly today morning AuthenTec software on my notebook (3000 N200 0769) has stopped working. I am not getting the finger print option when I start my vista and further when I open the software it says AuthenTec not installed or sensor is switched off...!!
    Please, if anyone can suggest any solution than it will be really appreciated.
    Thanks,
    Dhaval
    Message Edited by Dhaval on 05-02-2009 02:00 PM

    Dhaval and mike161,
    Please email info[at]authentec.com with the details of your issues and ask for (me) Scott Poole.  I will do my best to assist you in determining what has gone wrong with your fingerprint sensors.
    -Scott
    Moderator Note; e-mail address edited. To help prevent Authentec's spam filter doing over-time.
    Message Edited by andyP on 07-01-2009 09:13 PM

  • Printing SUDDENLY stopped working

    I'm suddenly unable to print on my MacBook Pro. Choosing Print in any application does nothing, and I see the following error in the console log:
    May 6 18:52:15 Mcohen-MacBookPro Safari[464]: * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
    May 6 18:52:27 Mcohen-MacBookPro Safari[464]: NSExceptionHandler has recorded the following exception:\nNSRangeException -- * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)\nStack trace: 0x1ef19a 0x90b880fb 0x937c102b 0x937c106a 0x92da03df 0x92d1e218 0x1f52ce6d 0x1f52b196 0x1f5407b2 0x1f54a79b 0x961e070a 0x9617e6f4 0x9641b917 0x9641af54 0xa7c0a 0x19de5c1 0xa7ad7 0x964ab5c5 0x964ab4d1 0x19de662 0x964ab1d8 0x96249e56 0x2ccc8 0x962f87cc 0x962f84d1 0x962d53ae 0x952a5fc3 0x952a53fd 0x952c1e0e 0x952f686d 0x9531cfbf 0x9531cf7c 0x9531ce7e 0x952f9b1e 0x952f9509 0x952f937d 0x96211f77 0x96178c72 0x9617808e 0x7f2e 0x961710c5 0x9613e30a 0xb9906 0x2
    May 6 18:52:27 Mcohen-MacBookPro Safari[464]: * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
    I use 3 shared printers with my MacBook Pro: a Brother HL1440 (shared from my Mac Mini), a Brother MFC420CN connected to my router, and an HP PhotoSmart A620 shared from my Buffalo TeraStation. My MBP is networked wirelessly to an Airport Extreme 802.11n base station.
    I've tried resetting the printing system, clearing caches, multiple restarts, and running FixAirportPrinter (which shows an empty list). The only thing that changed was installing VMware 2.0 today.

    Hello Mike:
    A place to start would be to uninstall the VMware application you mention (I have no clue what it does as I do not use it). Third party applications sometimes do not play well with OS X. If you do not want to do that, contact the software developer.
    Barry

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • My phone is dead (no it is not the battery).  It suddenly stopped working.  I tried pressing the on/off button to no avail. What is up with this?

    My phone is dead (no it is not the battery).  It suddenly stopped working.  I tried pressing the on/off button to no avail. What is up with this?

    Press and hold down for at least 10 to 15 seconds, both the home and power/sleep buttons until the Apple logo shows up on the screen.
    This will reboot the iPhone.
    Its likely the iPhone crashed, and you need to reboot it. No data should be lost though.

  • My cred card suddenly stopped working. What i can do?

    My cred card suddenly stopped working. What i can do?
    The cards have money and my account don`t have a option to none card.

    Take it back to Apple and ask them to repair it.
    Allan

  • My camera all of the sudden stopped working. What is going on?

    My camera all of the sudden stopped working. What is going on?

    if by camera you are referring to iSight, here is how to troubleshoot:
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    Standalone iSight cameras
    The instructions in this section apply if you have an iSight camera that is not built into your computer but attaches to the computer via a FireWire cable.
    Make sure the cable is completely plugged in.
    Incomplete cable connections are the most common cause of hardware problems. Follow these quick instructions to make sure your iSight cable is completely plugged in.If your iSight camera continues to function improperly, continue on to the steps below.
    Turn the computer and the camera off.
    Unplug the FireWire cable from your computer and the camera.
    Wait a few seconds.
    Firmly, without forcing, plug the cable back in to the camera and the computer.
    Caution: FireWire ports are keyed so the FireWire cable can only be inserted one way. Make sure you are inserting the FireWire cable into the FireWire port in the correct orientation.
    Restart your computer.
    If the green light on top of the iSight is not lit, turn on the camera by gently twisting the lens.
    Launch iChat AV.
    See if a different FireWire port works.
    Some Macs have more than one FireWire port. If your computer has another FireWire port, disconnect the iSight camera from the current port and plug it into the other one. Restart your computer and test the camera before continuing to step three.
    Check to see if other FireWire devices work.
    If you have another FireWire device, such as a video camera or an external hard drive, try plugging it into your computer to see if it works. If your other FireWire devices work, this means that your computer's FireWire port is working correctly. If your other FireWire devices don't work, there may be an issue with your computer. Contact an Apple Authorized Service Provider for assistance.
    Determine if there is an incompatibility with another FireWire device.
    If more than one FireWire device is connected to your computer, there may be an incompatibility between two of the devices. To rule this out, disconnect all other FireWire devices from the computer, including external hard drives, CD/DVD drives, other cameras, and FireWire-based networking equipment, such as hubs and repeaters. If your iSight camera works normally when you remove other FireWire devices, plug them back in one at a time to isolate the cause of the issue.
    Make sure the FireWire cable is good.
    Follow these steps to test the FireWire cable:Information about your iSight camera should appear in the FireWire Information field. If you see the iSight camera in this field, your cable is good. Once you've confirmed the cable you are using is good, use it to plug your iSight into your computer. If the green light on the top of the camera does not light up immediately (within a second), there may be an issue with your camera. Fill out an iSight Service Request to have your camera repaired.
    Important: Do not send your iSight camera for repair until you have tried each troubleshooting step.If the FireWire cable that came with your iSight camera didn't work, try another FireWire cable that you know works. If this cable works, there is an issue with your iSight's FireWire cable. If your camera is in the limited warranty period, fill out an iSight Service Request to receive a replacement cable.
    Choose About This Mac from the Apple menu.
    Click More Info. System Profiler opens.
    In the System Profiler window, click on the Devices and Volumes option.
    Click the disclosure triangle, if necessary, in the FireWire Information area.
    Check to see if there is an issue with your camera.
    If information about your iSight appears in System Profiler but the camera still does not work, follow these steps:Video from your iSight camera should appear on screen. If the screen is blue or black, there may be an issue with the camera. Fill out an iSight Service Request to have your camera repaired.
    Open iChat AV.
    Choose Preferences from the iChat menu.
    Click the Video button.
    Twist the front of the iSight camera lens to open the iris barrier. The green light on the camera turns on when the iris barrier is open.

  • Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

    My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

    The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

  • My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
    Those tests determine whether:
    a) Your Mac software had stopped working  OR
    b) Only the display had stopped working
    If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
    If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
    ¿Software was still running?
    --Yes, the problem is ONLY in the display subsystem
    --No, this is a computer-wide problem such as a kernel panic

  • HT204368 My Bluetooth just suddenly stopped working with my vehicles factory system. It's worked for almost a year with no issues. My wife's phone will easily paid with the vehicle,so nothing has changed with the vehicle. What gives apple?

    Why would my bluetooth suddenly stop working?

    I have had non-Apple Bluetooth devices simply stop communicating after being paired with a device for a year or longer with no apparent reason. The solution was simply to pair the device again.
    An explanation is likely to be elusive, resulting only in manufacturers of the devices blaming each other for deficiencies either real or imagined.

  • Firefox suddenly stopped working blocking evenb safari- why? what has gone wrong, under feed back ?http?

    Firefox suddenly stopped working with Mac OS 10.6.8- keeps blocking even Safari- will jot download , open pdf file downloads-- wasted a lot of time of several University experts- we can't locate work out why- x3 quit everything, download, reinstalled twice, machine switch on/off- something seriously wrong and wasting alot of time.
    It had been working faultless for years- recently iMAC 1TB disc was changed by Apple under their programme of exchange for 'free'- it has not worked since!!!!
    Many thanks

    On PDF issues, disable the Adobe Acrobat plugin so that PDFs open in Apple's own native PDF reader instead.
    Firefox menu bar: Tools > Add-ons > Plugins category
    I don't understand the part about blocking Safari. Can you describe that problem in more detail?

Maybe you are looking for