My printer will come on, control & power button don't function.

I have J6480 All-in-one printer, while turn-off the printer off I held the on/off button to long, I think this created the problem?

Is the iPhone online? The Find My iPhone help says once the device is online, the sound plays for two minutes, and an email is then sent to your Apple ID email address (the one you use with iCloud).
If all that occurred and your iPhone is still not working, perhaps it's run out of power. It might simply need a good charge.
If it has power, you might try a reset. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

Similar Messages

I need to hard reset a Palm TX but the Power button does not function.

I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
Post relates to: Palm TX

Hi,
PowerBtn from the Canuck Software HomePage.
NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
http://www.canuck-software.ca/
PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
This setting will remain active while 'Enable' on the PowerBtn screen is active.
The user can select 'Disable' on the PowerBtn screen.
The setting will survive a Soft Reset. (Hi PG )
If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
All the best, woz of oz
Post relates to: Palm TX

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in.

My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well. Any suggestions? Running Lion 10.7.4 and sending all reports in to Apple.

First things first:
Update your profile (equipent, OSX, etc)
In Lion MS office2004 is not compatible, are you stIll using it?
Do the SMC RESET and do the PRAM reset.

Volume buttons and mute button don't function in Windows 8 64-bit

Almost funny, I also have installed Windows 8 64-bit on my ThionkPad SL500 (clean install). I have read other people complaining about "Volume buttons and mute button don't function". This is exactly the same problem I have. I have found no exact procedure about what software to install to make this work. Instead people refer to other threads that often end in some desert... So, does anyone (Lenovo?) have a clear answer on what software to install (and links to those drivers please...) :-? And, yes, I have tried installing different software packages by following threads, but nothing has worked just yet... So, clear instructions / links, please :-)
Thanks,
Niels

I recently found this information on the micorsoft troubleshooting website and thought of your post, not sure if you had found a solution but hopefully it is helpful.
My keyboard volume controls suddenly stopped working
If the volume controls on your keyboard stops working, check the Human Interface Device Access service on your computer to make sure it is set to Automatic.
In the Start menu, type View local services.
From the Search Results list, select View local services.
In the Services dialog box, locate Human Interface Device Access. Make sure the status is set to “Started.” If it is not started, click Start the service.
Right-click Human Interface Device Access and select Properties.
On the General tab, in the Startup type, select Automatic, and then click OK.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

MacBook Pro will not wake, holding power button does not shut it down either

My mbpro will not wake and even holding down the power button will not shut it down. Any ideas? Thanks.

You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
The try resetting the SMC http://support.apple.com/kb/ht3964

Will apple fix my power button and if so how much will it cost

I need to know how much apple will cost to fix the power button on my iPhone 4

Out of warranty replacement for iPhone 4 is $149 US.
Apple does not repair iPhones, but replaces them.
Check here to see your warranty status:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If you are still in warranty and problem is due to manufacturing defect,
Apple will not charge for the replacement.
Make an appointment before going to the Genius Bar to avoid delay:
http://www.apple.com/retail/geniusbar/

Power button and other functions on my Nokia N86 s...

After I downloaded a few applications for my Nokia N86, the slider preferences (i.e. the sound clips that play when opening/closing the slider; the answer/hang up call function; and the key lock) stopped working. Some apps refuse to open (no response). Also, when I push the power button on top of the phone, it does absolutely nothing, thus I cannot turn my phone off.
I am affraid to take the battery out and let the phone power down then up because the power button might not be able to turn it on.
This occurred after I downloaded a few apps off of cnet.com. Here is a list of my downloaded apps with the most recently downloaded ones listed first:
F-Secure (anti virus added and scanned after problem started - no viruses present)
Handywi (wifi locator)
fring (social networking bundle)
DivX player
Google app (m.google.com/app)
Google maps
Opera Mini (web browser that now refuses to open)
HNN Soft Talking Dictionary (Chinese/English that now refuses to open)
What should I do???
(Yes, I have the most current software update)
(Not sure if it matters, but I live and bought the phone in Taipei, Taiwan)
Message Edited by sk8erfrombham on 07-Jul-2009 02:22 PM
Solved!
Go to Solution.

Sorry, if you are not willing to try it then I cannot help you.
Take it to a nokia care point for assitance.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Power button don't work

Hi
Marry Christmas foreveryone at first.
My MacAir's Power button has strange behavior It works when I try to switch ON my MacAir, but when I press it when computer works, i don't get dialog with Shoutdown/Sleep select options. Also it looks like my MacAir doesn't go to sleep mode when I close laptop. i think so because when I open it after it wakes up only by Power button all other buttons do not wake it up
Please, advise, should i carry it to service or i have to check any setup preferences...
Thank you.
Regards,
Georgy

The keyboard will often hold the liquid and protect the motherboard, unless it is a large spill. I certainly would try a different keyboard. It sounds like you got liquid into the grid below the keys. I would pull the keyboard first and see if there are signs that liquid got through.

My iphone wont turn on and the power button is not functioning

my iphonw wont turn on and the power button is not functioning

If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
You'd be better served by selling it for parts & using the money to purchase a new phone.

Display dimming buttons don't function on wireless keyboard.

Display dimming buttons do not function on the wireless keyboard, but do function on the MacBook Pro's keyboard. That is, I cannot control brightness of the MacBook Pro's display from the wireless keyboard, but can do so with the MacBook Pro's built in keyboard. Neither of the keyboards seem to have any control over the external monitor. The wireless keyboard is a brand new Apple aluminum keyboard. How can I gain control of the wireless keyboard's brightness control buttons?

Hello roytel:
Welcome to HP's forum. Sorry your keyboard has become corrupted. Unfortunately there is no way to excess the keyboard. They are manufacturered preinstalled software as a set. That is Bllue Tooth Device, Mouse and Keyboard. The only solution is to replace the set. I am on my third Keyboard, Mouse and Blue Tooth Device set. Please check and compare the prices at HP's store and HP's part store. HP's parts store was cheeper when I bought my last set. I have on hand a cheep USB Keyboard as spare. This way you can continue using your computer in the mean time while your new keyboard set is being ship. Here is HP's Part Store link http://h20141.www2.hp.com/hpparts/ and here is HP's Store Wireless Keyboard sets link http://www.shopping.hp.com/en_US/home-office/-/search-SimpleOfferSearch;pgid=9ENQqrMsvdhSRpHAjtpLkm....+ You are welcome use your Sound Icon by the clock on Task Bar as the volume control or any of your media players untill your new keyboard arrives. frrw

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

When i turn printer on light next to power button turns orange and a code 07a74dd6 pops up on screen

Have an HP Photosmart 335 bottom has Q6377L on door

Are you able to use the printer with this error message or are you stuck on this screen ?
Also did you make any ink cartridge changes lately ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

How can I do a hard reset of iPhone 5 if iTunes and power buttons don't work?

My son's iPhone 5 will not go past the screen with the little blue iTunes logo up top and an image of the charger on bottom. I've tried syncing to iTunes to restore but receive an error message after it goes through updates. The error reads, "There was a problem downloading the software for the iPhone "iPhone". The network connection was reset. Make sure your network settings are correct and your network connection is active, or try again later." So then I try holding down the power and home buttons to get the Apple logo but then the initial screen comes backs (iTunes logo/image of charger). This phone is really not THAT old so there has to be a solution out there.

The error that you are seeing has to do with your Internet connection. Try disabling your anti-virus software and connect the iPhone again and try to restore. See this support document for help. http://support.apple.com/kb/HT1808

Speakers are not recognized while in OSX 10.7.3 can't restart without power button (don't know if they are related)

I am willing to split up the two symptoms if they are not related. But I know the speakers aren't broken because I hear the Bong noise at boot, but to my misfortune I made the mistake of deleting something (important I guess) in the Audio Midi Setup (Audio Devices window). I was trying to figure out how to split audio tracks between my headphones and speakers so I could listen to music in one ear while skyping (sounds stupid I know, but I stay on Skype with a long distance coworker most of the day). I guess some 17 hours ago when the failure happened I found on Google that there were sound settings in the Audio Midi Setup and had the great idea to go clicking around in there. Somehow deleted the black option thing (only got a quick look) when my computer lagged and then no more sound... I've been trying to fix it with stuff I found on google but I think I made it worse because now my macbook hangs on a black screen during the shutdown process when I choose to restart from the Apple Menu up there in the top left of my screen. I'm out of Ideas, I've tried clearing P & V rams or whatever several times and gone through almost every post on these forums and google that I can find that have any words relevant to what is the problem. After 15 hours of trying on my own I thought I'd ask for help.
Any additional info I can provide let me know please.
Thank you.

I started having connectivity issues to my 10.6.8 server from my 10.7 client immediately after updating the client to 10.7.3. FWIW. Takes forever to connect, when it does. After just milliconds before.

Preferences Buttons Don't Function

I initially thought I was having a problem with Time Machine, because nothing happens when I click the Select Disk button. However, it turns out that NONE of the buttons in any of my system preferences function. But only on my Macbook Pro, not on my Mac Mini. Anyone else experience this?

From elsewhere in this forum:
https://discussions.apple.com/thread/5484035?start=75&tstart=0
This is the fix:
In Terminal...
     defaults write NSGlobalDomain NSUseLeopardWindowValues YES
     defaults write com.apple.Safari NSUseLeopardWindowValues YES
     defaults write com.apple.screencapture disable-shadow -bool false
     killall SystemUIServer
(Credit and thanks to luke_aus)
Fixed my problem completely!

My printer will come on, control & power button don't function.

Similar Messages

Maybe you are looking for