My printer will not connect to the network and i cannot find drivers for it

I just installed Win 10 64 bit and I lost all connection o my printer it is saying I am on another network and each time i try to load the drivers for it it fails

Hello vikagor,
Thank you for visiting Apple Support Communities.  It sounds like you are talking about cellular data not phone calls that's the issue.
For troubleshooting cellular data issues please see:
iPhone cellular data connection issues
Note the first symptom is, "No connection over cellular network, but works over Wi-Fi".
Take care,
Nubz

Similar Messages

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • HT1695 my ipad will not connect to the internet and it has been but now it won't do it at all

    my ipad will not connect to the internet and is has been before now

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can`t install my brother printer model mfc-j5910, the printer will not apear in the menu and I did more than twice an update. please help

    Hi there,
    try to reinstall my Brother Printer after the Maverics update, but it seems it is not longer possible. I loaded tons of software from Brother and Apple support and run the installatin, but the printer will not apear in the printer menu.
    Before the update the printer worked fine via WLan and yes both are in the same network. With my second Notebook it works just as fine, can`t figure out what is wrong.
    I need my printer for daily work, please help me out
    best regards

    Try resetting the printing system:
    http://support.apple.com/kb/PH14141

  • Printer will not connect to wireless network

    I have followed all the troubleshooting ideas, but still keep getting the following message...  "This computer appears to have a working internet connection, but cannot find "Deskjet 2540 series [CA8F2C]._ipp_tcp.local." You many have typed the address incorrectly."  Does anyone have any ideas what to do to fix this problem?

    Hi , Welcome to the HP Forums! I see that your HP Deskjet 2540 will not connect to your wireless network on Mac OS X 10.7. I am happy to help!  Please try the steps within the following guides:  'Printer Offline' or 'Printer Not Responding' Message (OS X).Printer Does Not Maintain Wireless Connection.How to troubleshoot Wi-Fi connectivity in OS X Lion or earlier. Hope these guides are helpful, and have a nice day!  “Please click the Thumbs up icon below to thank me for responding.”

  • HT4199 I am trying to connect a new ipad air to my home wireless network. upon entering the password the ipad will not connect to the network. the network is good.

    I am trying to connect a new ipad air to my home wifi network. The ipad sees the network, asks for a password but will not connect. Password and network are good.

    Hi there sibisjo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W.

  • Hp 1320n will not connect over the network

    Hi,
    I'm trying to get my macbook pro to with 10.6.8 to connect to my HP 1320n printer through the network. It works fine when I have it connected directly via USB.  I'm trying to get it to work through the network.  I have the printer connected to the router and My macbook pro is using wireless.  It can detect it with bonjour but when I try to to print it says trying to connect then can't.  I tried setting it up with the IP address that the printer has but it can't connect to it either.  I got the printer address by pressing the green button on the back of it.  Also is there anyway to reset the printer?  it has an old host name which I can;t figure out how to change.  I tried holding the green button in the back for 3 sec.  I also tried turning it off and then back on while holding the green 'GO' button on the top, both failed to reset anything. 
    ultimatily I'm trying to get my two 1320n printers work work with my 2 computers in the office.  My other is an imac with the latest version of software. 
    Any help is appreciated.

    try making certain that you have the latest drivers installed, which you can caget fron HP. After downloading do to system prefs>>print/fax. hightlight the HO1320n (use the - key). then use the add 9+) key ang select the HP1320n icon to add the nem printer. Set the HP as your your default printer. When you go to print for the first time, make sure that the selected printed is the the HP1320. It should go. Sometimes it need to be re-created when there are multiples.
    Good luck and hope this helps

  • My iPad will not connect to the iTunes and app stores

    Hi
    I was wonders ring whether anyone would be able to help me with this problem that I'm having. My iPad is connected to the Internet and I can use any app that needs Internet access except the App Store and iTunes Store. Anyone help would much appreciated
    Cameron.

    1. Sign out of iTunes and App Store and sign back in again
    2. Settings>General>Date & Time>Set Automatically>On
    3. Check you Time Zone

  • TS1363 When I try to sync my iphone and itunes I get a message that itunes is not connected to the internet and my computer is-thanks for help

    When I open itunes on my computer which has had my lists for a long time I get a message that says the itunes is not connected to the internet which is it,
    I can't therefore sync songs to my iphone-what do I need to do? -thanks for help

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • My printer will not stay on the network

    I have a HP 5520.  My Mac do cannot see the printers. 

    See this HP support article. Not all of the steps are applicable, and there may be a more relevant article for your model.

  • IPad will not connect with extended network and/or guest network

    I have extended my main network (AP Extreme) with an AP Express and uses a guest network too, all Macs, PC's, iPhones, game consoles, mediaplayers can connect to the internet with both networks. Only one device does not work with the main network and that is the iPad (1st gen). It can connect to the guest network, though. If i disconnect the Express, the iPad can connect with the main network or if I set the guest network to off it will too. But  I want to connect to the main network (remote access).
    Device.                          Network.          iPad internetconnection
    Extreme.                        Main.               Yes
    Extreme + Express.       Main.               Yes
    Extreme.                        Main + guest    Yes both
    Extreme + Express.       Main + guest.   NO
    I have reset the network configurations on the iPad and it works for only one time, if the iPad goes into sleep mode and restarts, the connections is lost. The iPad seems to be connected with the router/AP but no internet access.
    Fyi
    - all devices have a fixed IP address dedicated by the Airport. i tried to use DHCP, but no difference
    - radio channels on automatic
    - all on 2,4 GHz band
    IS THIS A IPAD 1 ISSUE and do I have to accept the fact that Apple does not support the iPad 1 anymore?
    Any suggestions how to fix this? Thank you.

    Thank you for the suggestion.
    The name of my home wifi network is automatically found by the iPad and after I select it the iPad asks for a password.  I have typed in my password that I use with my laptop, but it does not work.
    I also tried the two alpha numeric 13 digit strings on my router.  It is actually a Belkin.  Neither of those worked either.
    finally, I went into general as I could not find settings to tell the iPad to forget network settings?

  • Just got the Iphone 6 and it paired BT with the car phone system okay.  But it will not pair with the audio part where I could play my recorded music with my 5-C.  The system will not connect with the phone and the message is that the settings

    My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player".  Message says for me to adjust the player.  On the phone it is searching for other devices but not connecting.  Now same phone is paired with the car multimedia system and will take and make calls.  Help!

    I very much doubt it  if you consider how much data Apple release to App developers
    to allow them to create apps that  work under iOS
    Audi being lazy like most of the other motor manufacturers
    They will be registered developers and as such get all the info and data they need

  • HT201407 My face time and imessage will not activate despite good network and several days of waiting for both to activate. Moreover, I am having problem with push notifications even though i have connected my device to itunes as it suggested.

    kindly advice. my push notifications, facetime and imessage are giving me a big headache. How do i get all to work despite connecting to the itunes.

    ok for facetime and imessage go into settings turn them off make sure to make an icloud backup and then go to settings general erase all content and settings and then set it up from the backup it should activate your imessage and facetime

  • My printer will not recognize greeting card stock and I cannot use card programs.

    I have changed all of the necessary thing when loading card stock into the printer, and yet the printer asks for paper.  It doesn't recognize the card stock and I cannot use any of my greeting card programs.

    You are not alone with this issue. I wish that HP would accept the fact that printing with card stock is an issue that needs to be addressed and corrected. My Officejet 8600 Plus will not pick up nor print any weight (67 or 110) card stock. It is listed in their specifications that it will! Neither Best Buy or Office Depot could get their display units to print card stock either. Under troubleshooting they list a series of steps that do not apply to the basic problem. When trying to print to card stock you receive a "Out of Paper" error message. It is a known issue and not being addressed. I just posted this same problem so will see what comes back and stay in touch.

  • HT4061 My ipad has locked me out and there is a message on the screen saying my subscription to a film has expired. When I press 'ok' it will not go off the screen and I cannot get into my ipad?

    I'm having trouble getting into my ipad. There is message on the screen in a small box saying my subscription to a film has expired. When I press 'ok' in the small box nothing happens and I cannot use the ipad. I have tried turning it off and on but the same message is there and I cannot use the ipad. Any suggestions, please?
    Noosie56

    Try this and see if it helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

Maybe you are looking for

  • Dunning email and print both at a time

    Hi all, My client need to send Dunning document as email to the customer, at the same time they want to generate printout also for the same. I have successfully send an email to customer email address. But i am unable to generate print out for the sa

  • Illustrator 8 on Mac OS X 10.4.11

    Yes, I realize that it wasn't designed to be able to work with Mac OS X. I've been a PS user for years now, and decided to give Illustrator a try. But, before I dish out hundreds of bucks on it, I thought I'd purchase an earlier version from Ebay and

  • Fire Wire Control or RS 422 control for capture

    I am looking for a DVD player/recorder that can be controlled (via firewire/RS 422) by FCE and FCP for log and capture functions. Right not I have been HOT Rolling via a Conapus box (ADVC 100) Any suggestions

  • Keyboard does not disappear in iOS

    Hi Everybody, I'm developing a mobile application in Flash Builder 4.6 but when I use this in my iPhone 3GS device having iOS version 4.2.1, my keyboard doesn't disappear even I hit the return key. For more reference, please have a look over my attac

  • How to clear context before navigation?

    Hi, I have a Web Dynpro ABAP application running in the portal which display some data in a textedit depending on a couple of parameters. These parameters are captured using a selection screen in a BI iView and sent using a portal event. Here's the p