My printer will print an email but will not print a photo that is saved in my photo file. help

I have a HP Photosmart D110 model.
It is not printing from any of my photo files but will print from an email page. Please help in correcting this.

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • Pre9 will not take large photo files, is 13 any better

    pre9 will not take large photo files is 13 any better

    old1
    What computer operating system is your Premiere Elements 9.0/9.0.1 running on - with version 9.0/9.01, it is a 32 bit application whether it is run on 32 or 64 bit computer. So, you will get that "too large" error message when your still total pixel count exceeds the limit.
    If you go to Premiere Elements 10, 11, 12, or 13 (the current version) and you are running one of those programs on a 64 bit computer, each will be a 64 bit application and program will not throw off the "too large" error message. I have challenged these latter applications with stills 10000 x 7500, and each was imported with issue.
    But, the question becomes, because you can, should you? No matter how high the resolution of the image, it will be forced into the resolution characteristic of the import. Just how much you can get away with in this regard goes to your computer resource and how many of these stills oversized for the project settings.
    If you put Premiere Elements 13 on a Window 7 or 8 32 bit system, I am fairly confident that you end up with "too large" error message. That would not be the case if Premiere Elements 13 on a Windows 7 or 8 64 bit system.
    Please review and consider. Any questions or need clarification, please do not hesitate to ask.
    ATR

  • Camera Raw Will Not Open .CR2 Photo Files

    I use Photoshop 7.0 with a Windows Vista operating system. Camera Raw in Elements will not recognize the Canon .CR2 Raw photo files that I download from my Canon 50D using a card reader. I even downloaded the new Camera Raw 5.1 from Adobe with the same results. Any ideas?

    Indeed, I stand corrected:
    Windows:
    Photoshop Elements 6.0 and 7.0: Camera Raw 5.x
    Photoshop Elements 5.0: Camera Raw 4.6
    Photoshop Elements 4.0: Camera Raw 3.7
    Photoshop Elements 3.0: Camera Raw 3.6
    Macintosh:
    Photoshop Elements 6.0: Camera Raw 5.x
    Photoshop Elements 4.0.1: Camera Raw 4.6
    Photoshop Elements 3.0: Camera Raw 3.6
    (The following page can be confusing, with versions of ACR intermingling with versions of PSE, and different versions than the headings being listed.)
    http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows

  • I need to change my rescue email,but i forgot the password to that email,what will i do?and i have 25 ueros on this apple account so i dont want to make a new one!

    i need to change my rescue email,but i forgot the password to that email,what will i do?and i have 25 ueros on this apple account so i dont want to make a new one!

    Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
    If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
    If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

  • I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

    I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

    I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

  • Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

    Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

    After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

  • I have updated to the new version of iPhoto but it will no longer let me edit text in the preset text boxes.  The text is highlighted for a nanosecond but will not stay highlighted so I can amend it.  Can anyone help me with this.  Many thanks.

    I have updated to the latest version of iPhoto.  But now iPhoto will not let me amend the preset text in the text boxes.
    the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
    can anyone help me with this issue.
    Many thanks

    You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    If you want to go back to 3.6x, you will find it here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

  • My iMac will not connect to Photo Stream, but all my other devices will. i have all updates.

    My brand new, 2.7 GHz intel Core i5 will not connect to Photo stream, no matter what I do.
    I try to enable it from Icloud Preferences.
    I try to turn it on from Iphoto preferences.
    I try to turn it on from the iphoto app, but no luck.
    When I try to add an account, it doesnt have the icloud option. Only Mobileme.
    It says I'm signed in.
    Getting frustrated!!!
    HELP!!!!!

    Did you set DNS Server properly?
    System Preferences -> Network -> Advance... -> DNS

  • I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

    I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thnaks

    Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks

    The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
    Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple.

  • I have an ipod 3g with version 4.2.1 but will not let me update that

    I have an ipod 3g with version 4.2.1 but will not let me update that, I get a sign with the legend "This version of the iPod software (4.2.1) is the current version."
    but when I want to download apps actualize asks me to ios 5

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I have CC and bridge, bridge will open but I cannot open a photo file.  I get a message: Windows cannot fint C:............... CS4 ck to see if you have spelled properly. Any Ideals?             a message: Windows cannot

    I have CC and bridge, bridge will open but I cannot open a photo file.  I get a message: Windows cannot fint C:............... CS4 ck to see if you have spelled properly. Any Ideals?   I had CS4 but have since removed it.   

    A couple of possibilities:
    How did you remove CS4 ?  If you removed it improperly instead of Uninstalling it (say, you "deleted" it or just dragged it to the Recycling Bin), you almost certainly left stuff behind that needed uninstalling.
    What's even worse, if you removed CS4 after you installed CC you may have messed with the CC installation.
    I'm not going to attempt to tell you how to fix it, since this will probably involve uninstalling CC and after that looking for, downloading the Adobe CS_Cleaner tool and the CC_Cleaner tool, then re-installing CC, since I'm not a Windows user and don't want to mislead you.
    In any case, when Windows users chime in to assist you, they'll need all the details which you have not provided so far.

  • Iphoto on my used mac mini will not open my photos from my new macbook air, it says to update software but there arent any available.. please help

    iphoto on my used mac mini will not open my photos from my new macbook air,  it says something about updating the software, but i checked and there arent any updates available... please help

    Sorry for the second post..
    I currently do not have an older version of iPhoto to test this on, but you might also try coping the Originals from the iPhoto Library of iPhoto 11.
    To do that;
    1. Right (control) click on the iPhoto Library in the Picture Folder on the MacBook Air
    2. Select Show Package Content.
    3. Click on the Originals Folder
    4. Navigate to the disired Event or photos and copy those images to your Flash or External Drive, then copy those to the older version of iPhoto.
    Beware do not move, add or delete anything in the iPhoto Library, Apple has intensionally hidden it in later versions to prevent people from messing things up.

  • When i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

  • HT1923 I cannot install the latest version of itunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no itunes .  Help please

    I cannot install the latest version of iTunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no iTunes and the new version will not install until I can uninstall all the old components.  Help please

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    tt2

Maybe you are looking for

  • Loading data from text file into ListBox

    I have data in a text file that I want to load into a listbox... I have fully mastered handling strings and arrays so I'm going to need some help... I was wondering how do I get flash to load a text file that contains the data below.. and display it

  • Where can I get my mac book repaired in gurgaon

    Mac book started giving trouble all of a sudden....booting took extremely long. After reacher the home screen any application u selected took forever to upload. Of late the mac book has run out of charge and does not

  • Spry framework for Ajax

    Display " You are not authorized to view this page " when I can see index.html on demos folder, but when I see the html out the server work very well.

  • BUG? : group by section of long query changes on edit of query

    I labeled BUG with a question mark, but something is definitely not right. The question is where. I am trying SQL Developer in my Maintenance tasks for a client. At one point I was editing a big ugly query in a package that denormalize a bunch of stu

  • Can't export to flash

    I am trying to export a pixelBender program into the flash-compiled format and it is unable to do this. here is the code: Yes, it compiles. Even weirder, when I import two images and press "run", it says "this kernel is too complex for your graphics