My printer xi all-in-one) says its "out of paper" when it is Not. And will not print?

What's wrong with my printer? "Out of paper" error message is incorrect.(HP officejet 4215)

Hello marennad,
I am sorry to hear that you are having problems with your printer saying it is "out of paper" when it is not. If you would like my help, I would like for you to respond with some more information so I can better research this issue.
Please reply with:
Your Printers Model Number
Which OS you are running, Windows or Mac
Which troubleshooting steps have you attempted so far to help correct the issue?
I look forward to hearing from you.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

My computer says i am out of paper when i am not

my computer shows its out of paper, when its not

Unie,
If your Printer indicates the error, then what you do depends on your printer's model.
You can look up the troubleshooting tips for your printer:
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
Open tab "Troubleshooting" > Select Solve a problem > Jam and Feed Problems >
Select An 'Out of Paper' Message Displays ...
The exact wording may vary. The point is to find the document that most closely matches your situation.
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

My deskjet f4400 keeps saying its out of paper but there is tons in there? please help

My printer keeps saying it is out of paper, the software is up to date and there is tons of paper in it. ive pressed the power button but nothing is happening. Please help

Hi
Please follow the below link for this issue
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231830&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards
Mugu
---- If my answer was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button ---->
Though I work for HP the post are of my own

7515 printer thinks its out of paper and is not

My HP 7515 printer-scanner thinks it is out of paper when it is not. I have done the trouble shooting advised with no improvement. I also vacuumed for paper dust that might be fouling up any sensors. This has not been a heavily worked computer. My old 4215xi still does the majority of my printing.

@ SusanK210044 -
* Try removing all the paper from the input tray and looking with a flashlight into the rollers in the paper tray. Make sure there isn't any small pieces of paper, or a full sheet, caught in the rollers.
* Also, check the steps in the document, found here, for steps to help troubleshoot an Out of Paper error message. This will help determine if it is a settings or hardware based issue and provide steps to help fix the no feed problem.
@ 207 -
* Make sure there isn't a small piece of paper on the inside, right side of the printhead. This is a common spot for a small piece of paper to ball up and give this error message.
* Also, have you followed the steps in the paper jam troubleshooting document for this printer? A real or false paper jam will be troubleshot in the same manner. The document can be found here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP PSC 1610 All-In-One doesn't see that paper is loaded

HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
I am using an Intel MacBook running SnowLeopard

OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber. There was a cleaning kit made for this but I am not sure it is still available. Instructions for it are here.
It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite. Red was used in the kit, but green may be aggressive enough to do the job. You may have to fiddle with the printer to clean the entire circumference of the three rollers. Once you do this, you will be good to go for years to come!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a late 2011 macbook pro and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated

I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.

Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..

Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes?

Why does my printer keep saying out of paper? it's not!

My printer tries to pick up paper for a long time then tels me its out of paper...It's not. Is my machine broken? I just bought it like 2 months ago. What do I do or where do I take it to get it fixed?

Reset the product
With the product turned on , disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button
try printing again
if this doesn't work...
If you just purchased 2 months ago you are STILL in warranty an will get free support if you call
1800.474.6836
If they are unable to resolve over the phone you may be eligible for a free replacment.... but they will have to go thru trouble shooting first. expect to spend close to 1 hour on the phone.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I have disabled my iphone 5 and connected it to Itunes, It now says its doing a sotware update. does this mean it will wipe the old password off and be able to use my phone again?

I have disabled my iphone 5 and connected it to Itunes, It now says its doing a sotware update. does this mean it will wipe the old password off and be able to use my phone again?

When you restore your iPhone, it will erase everything from your iPhone including the passcode. You can restore a backup from iTunes or iCloud to get your infromation back though. This article may help http://support.apple.com/kb/HT1212

TS3212 i.m having issues with reinstalling my Itunes.it says that my apple mobile device faild to start and will not go any further

i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further

Hey there CrazyTC,
It sounds like you are unable to re install iTunes because the Apple Mobile Device service failed to start. Try restarting it with the following article:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Then if the issue is resolved, set the service to start Automatically with the same article.
If it is still not working, use these steps from the same article to completely uninstall iTunes and its associated applications and install a fresh copy.
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista, Windows 7, or Windows 8
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod. My computer died and i am buying a new one (mac is out of budget) When I get my new computer, obviously I will download Itunes. My Ipod s

I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod.
My computer died and i am buying a new one (mac is out of budget)
When I get my new computer, obviously I will download Itunes. My Ipod still has all the music on it and the external hard drive is ok.
I don't want to "erase" or lose any information when I sync with a new itunes that is "empty"
What are the steps? After I download Itunes and set the folder location to my external harddrive what is next? Will Itunes recognize my IPOD? Will it load the music/list from my ipd or external into itunes?
Thanks in advance

The following user tip is worth checking through:
Recovering your iTunes library from your iPod or iOS device

Hp 2540 says it need more paper when it don't

Hp 2540 printer says it needs more paper when it dont

Hello Vincento,
Welcome to the HP Support Forums!
I see that your 2540 will not print, stating it needs paper even though the tray is loaded with paper. I have a few more questions to better assist you.
What is the device you are printing from, computer (if so, what Operating System, Windows or Mac), Apple phone or tablet, Android phone or tablet, etc?
What are you trying to print, photo, web page, email, document, etc?
What type of paper is loaded in the printer?
In the mean time, try cleaning the rollers in the printer.
The Printer Does Not Pick Up or Feed Paper<---
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

When i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

when i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

Start a game with Game Center and go from there.

TS3276 cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

I cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

How large is 'large'?

My printer xi all-in-one) says its "out of paper" when it is Not. And will not print?

Similar Messages

Maybe you are looking for