My problem and temporary solution- no internet / wifi on mbp

My problem is either connected to wifi or ethernet, I can get a strange ip address and no internet. I called AT&T wifi support @ starbucks and they told me they could not give my machine an ip address. It also did not work on wifi at home, but worked in bootcamp.
In case somebody else is experiencing a similar issue, my temp solution has been to turn the date and times setting to the year 2000, reboot and restart looking for wifi. For some reason that fixes it. I then change the time back and use the internet.
This is new for me and if somebody else has a similar issue I would love to hear it.

After reading through multiple discussion posts and responses, I did the following and my ethernet port is working!
1) From System Preferences --> Networks, I arranged so that the Ethernet is first in the list followed by Wifi
2) Unplugged my Airport Extreme wifi router and left it for 5 minutes.
3) Plugged in my Airport Extreme wifi router and watched the Ethernet connection status turn GREEN.
4) Opened Safari and the Internet now works!
Hope this helps others that might be having the same issue.

Similar Messages

Start up problem and temporary solution

my 2 year old ibook g4 has been shutting down randomly for past several weeks. i tried holding down the power button and apple keys. this only resulted in the fan blowing and no start up sound. i also tried holding down the applepr keys based on what the help book suggested. this didn't work either.
here's what's works to start up my ibook. i read in one of these dicussions that if you sqeeze/press firmly on the left side of the track pad the computer will start. i tried it and voila it works!
the problem now is that it still shuts down after a day or two of being on all day. to get it to start quickly after a crash i've been pressing my elbow into the left side next to the track pad. this works all the time for now but if i move my elbow computer crashes. hence i am now typing with one finger while pressing my elbow into left side next to track pad!
i spoke to apple support and they said it seems to be a hardware issue. i didnt buy apple care so now i will have to find extra money that i don't have to fix this.
is anyone else having this problem? is there an inexpensive way to fix this? what is below the left side of the track pad that is causing this problem?
please help my elbow is sore!

If the safe boot worked well and a restart produced the same adverse symptoms suggests a problem caused by a third party application. If you delete all third party items and reinstall them systematically, you might be able to find the 'trouble maker'.
Ciao.

I cannot upload my iPhoto book to the Online Store. I get an error message that I cannot connect. Apple support said servers are too busy. Anyone else have this problem and a solution?

I cannot upload my iPhoto book to the Online Store. I get an error message that I cannot connect. Instructs me to try again later. Apple support said servers are too busy. Anyone else have this problem and a solution?

I get an error message that I cannot connect. Instructs me to try again later.
Try again later?
LN

Overprinting occurs when printing a playlist in CD Jewel Case Insert format. Anyone out there have this problem and a solution?

Overprinting occurs when printing a playlist in CD Jewel Case Insert format. Has anyone had this problem and found a solution?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

Updated to OS X Maverick and now the keyboard doesn't work. Anyone with similar problem and a solution?

I recently updated to the OS X Maverick and the keyboard just stopped functioning after working fine the first day. Pressing any key just produces a ding, but no mark. Pressing the return key produces a black dot as if you were putting in a confidential password. Has anyone had a similar problem and a possible solution? Thanks. mj-t

I am having the same problem and its not on every call, its very hit or miss, but very aggrovating. The screen just goes black and the home key nor the power button on top have any affect. Then the locked screen will show but you can't unlock the phone. I have to let it sit for a minute and then I can push the home button and go on in and the call is finally disconnected.

After installing iOS5 the syncing from iPhone to PC does not update PC. PC to iPhone is okay. Anyone having same problem and/or solution?

After installing iOS5 on my iPhone 4 I am having a problem syncing Calendar, Contacts etc. If I say add something in Calendar on my iPhone it will not sync to my PC, even though is says it is. However if I add something to my Calendar on my PC (using Outlook) it will sync to my iPhone. Anyone having the same issues and/or solution?

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

My internet connectivity problem (wifi and ethnet) and temporary solution.

My problem is either connected to wifi or ethernet, I can get a strange ip address and no internet. I called AT&T wifi support @ starbucks and they told me they could not give my machine an ip address. It also did not work on wifi at home, but worked in bootcamp.
Basically I cannot connect to the internet.
In case somebody else is experiencing a similar issue, my temp solution has been to turn the date and times setting to the year 2000, reboot and restart looking for wifi. For some reason that works, and I can change the time back after that.
This is new for me and if somebody else has a similar issue I would love to hear it.

My problem is either connected to wifi or ethernet, I can get a strange ip address and no internet. I called AT&T wifi support @ starbucks and they told me they could not give my machine an ip address. It also did not work on wifi at home, but worked in bootcamp.
Basically I cannot connect to the internet.
In case somebody else is experiencing a similar issue, my temp solution has been to turn the date and times setting to the year 2000, reboot and restart looking for wifi. For some reason that works, and I can change the time back after that.
This is new for me and if somebody else has a similar issue I would love to hear it.

G4 problems and as solution can i upgrade wifi on powerbook

Basically can i upgrade the wifi speed of my powerbook.
I have a G4 with an airport extreme attached, and my wii connects to the network too.
My G4 is on its last legs i think, the power supply is dodgy and this has already fried the usb ports of my apple lcd monitor, and for about a year the usb ports on the G4 only work with mouse, keyboard, bluetooth, card reader, and not with a usb 2.0 drive. My usb scanner blew up, guess that wasnt a coincidence.
I even added a usb 2.0 pcmcia card which operates exactly the same.
I have an ijoy media player (usb 2.0) so what ive had to do to get tv programs onto it is download on the G4, copy onto a firewire lacie pocketdrive and then attach the ijoy to the powerbook which has a usb 2.0 pcmcia card, and the pocket drive via firewire. A long way for a shortcut but all good.
In the last few days, the G4 has had big problems with the pocket drive (which is fine with the powerbook). It doesnt mount. The mouse cursor goes all juddery when its plugged in and then the mac crashes. Trying to get to a solution in between the crashes, using disc utility i can see the drive but it wont mount. When i try instead to format it, it crashes. It obviously hadnt done anything about the formatting as when i plug it in again to the powerbook there are still the last files on it.
I tried restarting into techtool pro. If i do this with the pocket drive plugged in it wont start up, freezing on the startup screen. If i plug the drive in when the techtools is open it cant see it.
So problem number 1, is my G4 power supply about to die or could there be something else wrong? If it is the power supply, is there a cheaper solution than spending a few hundred euro on a new apple one for an almost obsolete machine? Bear in mind my monitor is an apple 17" so if i replace the machine i have to replace the monitor.
Possible solution in the meantime to make sure the wife gets her kitchen nightmares et all, the only way i can think to get the files from G4 to powerbook so then onto ijoy, is a wired or wireless network.
So i can either pull out the ethernet from the router and stick it into the powerbook, will this create a network immediately?
Or i can use wifi. Is this easy? I figure it will be slow as the powerbook is 802.11b. Can i add a usb wifi 802.11g card (no point in n as the airport extreme box is g) and will this make much of a difference?
Sorry long ramble, thanks for any advice...

I do not see any indication of the Mhz/Ghz in the batter door. I have attached pictures of the interior. Hope this helps. I do not, necessarily, want to recover any data. My intention was to only wipe existing data, and then use this older unit just for accessing the internet. Since I could access the wireless network before the wipe, it did not occur to me that I would not be able after the reinstall. Thanks

Internet access problems and viewing video on internet

I have very limited interet access most of the time. I get a message: "You are not currently in an area that can handle data communication. ..." I have no problem with email and other features of the phone during this time. The signal at the top of my phone says "GSM". When I am able access the internet, it give me a different signal (can't remember what that is, however). Even then, I cannot view most video clips, such as YouTube clips. They will not load all the way. It states, "Error has occurred in attempting to play media." Help!

I have unlimited internet access, so that's not the problem. Right when I got the phone, I replaced the original data card with a 4G card and enabled mass storage. I have (since my first post) had more access capability by enabling the WiFi (da) which finds my wireless connection at home. I've also been able to view a video clip, not successfully all the way through, however. During viewing, the phone appears to crash, i.e. the screen goes white and then it takes 3-5 minutes for it to reboot. This has also happened when the phone has not even been being used. Also, as I was surfing the net, the phone asked if I wanted to enable Javascript which I did. Is there anything else that I need to enable or do to the phone in order to have a more pleasant experience using the internet and viewing video clips?

WRT300NV1 Problems and a solution

After spending 2.5 hrs on the tech support line, being disconnected 4 time and having to explain the problem 4 times here is the solution that I found for the following problem.
I have an 13 node network. 4 desktop computers, 1 laptop and 2 printers on the wired side of the router. 2 laptops (1 N and 1 G) and 2 desktop computers (both N) and 2 PDA's (both G) on the wireless side of the router. This network has been up for the past 3 years without issues. The Linksys router replaced a Belkin 54G router as I wanted the additional range and speed of the 802.N
Problems:
1. Computers on the wireless side could not print to a printer on the wired side of the router.
2. Computers on the wired side could not open or see file shares on the wireless side.
3. Computers on the wireless side could not open or see file shares on the wired side.
What I did before contacting support:
1. All systems could ping all other systems on both wired and wireless sides of the router.
2. All systems have access to the internet.
3. Checked and disabled firewall on wireless computers - NO Effect, still could not print.
4. Checked for updated firmware - no newer firmware available, router is on the latest version
5. Checked Linksys knowledge base for this issue - not found
6. Re-downloaded and flashed firmware - suspect that it was corrupted - did not fix problem
7. Rebooted the router multiple times with no effect
Contacted Tech support.
I could go in to a blow by blow account of the multiple phone calls but it is just the same support calls that they don't understand or listen to what you are trying to tell them. they just keep on going on some script that they have and it usually doesn't have anything to do with what your problem is. Every time that the tech would get to a place that they had no clue what to do next they would ask if they could put me on hold so they could talk to there supervisor. I would tell them sure and I would get put on hold. then anywhere from 30 sec to 5 minuets the phone would go dead and I would loose the connection. The most interesting one was the tech was telling me that I needed to contact the printer manufacture. When I asked why all she would say was that the wireless computers could not print to it so I needed to contact them. When I told her that I worked for the printer manufacture (I do work for them) and I asked again, why she wanted me to contact them. She immediately put me on hold and then the phone went dead 30 sec later.
At this point I was very frustrated. I started poking around in the router web console. I came across a setting that is called "AP Isolation" For those like me that are not sure what this means here is the definition.
"AP Isolation. This isolates all wireless clients and wireless devices on your network from each other. Wireless devices will be able to communicate with the Router but not with each other. To use this function, click Enabled. AP Isolation is disabled by default."
Wow! this sounded like something I was experiencing. So I enabled it. guess what--- Problem solved everything started working the way it was suppose to be working. Printing and file sharing were now back online. So to bring this long story to a close it would appear that the coders for the latest firmware got this one backwards or miscoded it somewhere.

There is a hard way and an easy way...
The hard way is to use a packet sniffing utility such as WireShark to record all the traffic, and then wade through all the packets looking for problems. This can be difficult to do for non-broadcast problems since most low end switches do not have provisions for monitoring all traffic, and a switch will limit all non-broadcast traffic based on its ARP tables, so that ports which don't need to see traffic will not be bothered by it. In other words, in a switched environment it can be difficult to monitor all traffic, unless your switch specifically supports it.
And now, the easy way:
Almost all switches, even the really really cheap ones, have access lights for each port connector. Broadcast storms are easy to see visually because the activity lights on all ports that have devices attached will blink like crazy in unison, because broadcast packets are being sent to all devices simultaneously. At this point, you can unplug network cables one at a time until the lights calm down. The last cable you pulled will be atttached to the offending device. If you want to be pendantic, you can then attach a hub (as opposed to a switch) on the network segment that the offending device is on, and use WireShark (or Ethereal, or whatever...) to look at the problem in depth. Or if you want to be lazy you can just reset the device and see if the problem goes away.
Good luck,
-Rory

Anybody faced this problem and got solution?

Hi Technosavvians
This is Rajesh. Working on webApplication project.The project Environment is in
Struts1.1 Framework with jdk1.4.2_01,WebServer as Tomcat5 on O.S Linux connecting back-end Mysql.
Next thing is I've properly closed each connection whenever I've opened the connection.So the db connection is properly maintained.And
Session too also properly maintained.In struts1.1 struts-config.xml
just for connection pooling I've coded <data-source> tag like
     <data-sources>
          <data-source type="org.apache.commons.dbcp.BasicDataSource">
               <set-property property="driverClassName"
               value="com.mysql.jdbc.Driver"/>
               <set-property property="url"
               value="jdbc:mysql://ip address/contextname"/>
               <set-property property="username"
               value=""/>
               <set-property property="password"
               value=""/>
               <set-property property="removeAbandoned"
               value="true"/>
               <set-property property="removeAbandonedTimeout"
               value="60"/>
          </data-source>
     </data-sources>
So for every 60 seconds the connection pool is checked to freeze-out the unwanted Connection.
Every thing works fine on first day but on the consecutive day it troubles.
MAIN PROBLEM STATEMENT IS
On the next day my LOGIN page can't be accessed and mainly my DB too can't be accessed.
So I want to know where will problem arise.Whether it's in Database Pooling or Tomcat related problems.
Please if any body faced the same problem pls update me regarding this issues.It's really painning & brainstorming.please help me to find out
a solution.
Thankx in Advance.
Rajesh

Following is the server status
pls anybody help me
Server Status
Manager
List Applications HTML Manager Help Manager Help Complete Server Status
Server Information
Tomcat Version JVM Version JVM Vendor OS Name OS Version OS Architecture
Apache Tomcat/5.0.25 1.4.2_02-b03 Sun Microsystems Inc. Linux 2.4.20-020stab009.21.777-enterprise i386
JVM
Free memory: 42.25 MB Total memory: 63.31 MB Max memory: 63.31 MB
http-8080
Max threads: 15 Min spare threads: 5 Max spare threads: 10 Current thread count: 5 Current thread busy: 1
Max processing time: 4 ms Processing time: 0 s Request count: 1 Error count: 0 Bytes received: 0.00 MB Bytes sent: 0.00 MB
Stage Time B Sent B Recv Client VHost Request
R ? ? ? ? ? ?
R ? ? ? ? ? ?
P: Parse and prepare request S: Service F: Finishing R: Ready K: Keepalive
jk8009
Max threads: 200 Min spare threads: 4 Max spare threads: 50 Current thread count: 8 Current thread busy: 3

V570 - Clean Install Problems and Some Solutions

And where is this new bios?
I ran into the same problem all these guys mentioned with Windows 7 Ultimate installing on the EFI partition. The wireless adapter simply does not start.
I only see the bios version 36 uploaded on August 17 which does not solve this issue for the Lenovo V570.

I have managed to install Win 7 64bit on the laptop.
Here is what I did, for whoever is interested:
Burnt an Ubuntu 10.10 LiveCD and booted from it; be patient, it takes a long time to read the files from the CD. (Ubuntu 11.04 displayed a black screen after booting)
Using GParted, I've created a NTFS Primary partition from all of the other existing partitions except the hidden LENOVO_PART, so I now have 2 partitions.
After this, I've followed the instructions posted by Obrut here: instructions (the post called Shutdown/Reboot hang problem solved!)
I haven't tried to use the OneKey Recovery key, although I kept the hidden partition. I don't have too high hopes that the OKR will continue to work, since I've changed the other partitions. Maybe Lenovo will come with a solution to this issue.
Anyway, Win7 is installed. In the following days, I will try to dual boot with Ubuntu.
Further questions:
Do you recommend updating BIOS to the new version or take the "If it ain't broke, don't fix it." approach?
When installing Ubuntu, what GRUB version should I install? (efi, legacy..)
Are there any (new) configurations that I should make or drivers I should download? I mention that I've installed the drivers on the DVD and updated via Win Update.
Thank you very much for your help JameZ and also thank you for the instructions, Obrut.

Screensharing authentication problem and weird solution

OK, I've been having the Screensharing authentication problem that crops up regularly on this forum. Accidentally I found a very weird solution. I want to know what's going on and to let others know of the solution.
Let's say my laptop account is called 'london' and I want to connect it to my tower account called 'paris' on the LAN. I browsed the network for the tower, click 'connect as' and in the dialog box I put in "Name: paris" and "Password: xxx". I click 'connect' and I am connected as the registered user 'paris' and I can browse all of the disks. File sharing is thus working normally.
Now I click the 'share screen...' button and I get another dialog box into which I once more type "Name: paris" and "Password: xxx". This yields an authentication failure message, which many users will be familiar with.
By accident instead of typing the name and password for the account on the distant machine, I typed into the dialog box the name and password of the local machine: ie. "Name: london" and "Password: yyy". Much to my amazement the screensharing works. What is going on?

No, the username on london is london and on the machine paris it is paris. However, the passwords are different.
Just to be clear, I first connect to the remote machine's file sharing using the remote machine's username and password (ie. in the normal fashion). I then connect screensharing but give the local machine's username and password in the dialog box.
Before I made this discovery I had created a couple of fresh accounts on the remote machine. One was glitched, while the other functioned properly (ie. screensharing required the remote machine's username and password). The bizarre fix worked for my original account. I have not tested it on the new accounts for fear of screwing things up again.

Safari 3.1 installed on 10.3.9, caused problems and proposed solution

Dear all,
I accidentally installed Safari 3.1 on my G4 10.3.9. Somehow I was confused and thought that it would run on my OS.
Wrong.
*Problems caused:*
Various programme's did not run, like, of course, Safari, Mail, Skype, Software Update. Other people have similar problems with different programme's.
Solution:
1) Download Pacifist http://www.charlessoft.com/
2) Download the Safari.pkg 1.2 and 1.3.1 versions
3) Run Pacifist: first install 1.2 followed by 'repair disk permissions' in disk utility
4) restart
5) run Pacifist, install via Pacifist safari.pkg 1.3.1.
*Now the follwing is IMPORTANT*
6) After installing Safari.pkg 1.2 I got the message that 1.3.1 was already installed which was NOT the case since I checked [APPLE-key]-'I' Safari and it said 1.2. I guess, but I am not a specialist, that this has caused the problem. Old files cause 'erratic' behavior.
Pacifist asks if you want to replace the Safari 1.3.1 files which are already in place. At this point you should enter 'YES'. It will install the correct 1.3.1 files.
7) after this, restart the computer, repeat the 'repair disk permissions' procedure in disk utility.
In my case it worked and all other programme's work again.
Caution: I lost my bookmarks but this has happened because I deleted the safari library files as suggested in different threads. I did not keep them in a safe place... Mail is working again, no lost data!
I hope it will work for you.
All the best,
Thom

Hi Thom
I shall try this but should I remove safari 3.1 first? I don't mind losing bookmarks - it's mail I want back most. I spoke to Apple support today and they suggested removing safari 3.1 and reinstalling the old safari which is what I guess this is but via Pacifist? Other than that they said it was archive and reinstall which I don't particularly want to try. The tech guy said he would post this as an issue to Apple.
regards
Christine

Touch ID - Biometric reader with problems and no solutions

I have an Iphone 5s Model 1457, after upgraded to iOS version 7.1.2 the biometric reader stopped working. I upgraded to IOS 8.0.2 and continues in the same situation. Already reset all settings and not solved. What should I do? Does the apple can solve this problem for your client?

I will answer Question #3:
I'm not sure if I understand exactly what is
happening. At first I thought you meant that you couldn't even add the second part of the association clause. But, later it sounds like you were able to add the second part of the clause (namely "address.bptype =
'c'") and that you are experiencing some runtime error.
Assuming the latter (that it is a RT problem), I take it this
"...cannot be resolved" error is the error with code 27020.
Under normal error conditions, you shouldn't get this error. Something "unusual" (or unforeseen by us) is happening if you are getting this error. Anyway, if you wrote your own client code, you should wrap a try/catch block around it, pick out the detail exception, and see what's going
on. See the example code below:
try
... make call that causes the exception ...
catch(oracle.jbo.AttrSetValException ex)
// Print stack trace for the outer ex
ex.printStackTrace();
// Get the inner exception
Object[] details = ex.getDetails();
if (details.length > 0)
Exception innerEx = (Exception) details[0];
// Now, print the inner exception's
// stack.
innerEx.printStackTrace();
This will help shed some light on the exception and the cause of it.
John - JDeveloper Team

My problem and temporary solution- no internet / wifi on mbp

Similar Messages

Maybe you are looking for