My problem is close and minimize buttons on the tabs.
The minimize and close buttons are working fine on the main screen. When I open tabs I cannot minimize them. I keep going up to minimize and I end up closing out the tab that I wanted.
Did you have any luck figuring this out? It just started happening on my wife's iPhone 5. Restoring to factory settings did nothing. One repair shop in my town thought it was the main chip going out.
Similar Messages
-
Customizing Popup Windows - 'close' and 'minimize' buttons
I am using RoboHelp 7, and while using 'Insert Image Map', I have successfully created and linked pop up windows. The code shows something as: javascript:BSSCPopup('add_order.htm',300,250). At present, it opens up on mouse click (I used <a href...></a> and it disappears on mouse click outside it, with of course drag or resize as required.
However, how I can customize the pop up window such as adding the toolbar, or ability to 'minimize' or 'close' it, when required (the default _ and x hat we have in UI screens? I want the control to close or minimize the pop up to remain with the user,
Thanks
NitiYou can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also try a different Windows theme to see if there is one that works better. -
Hello
I picked up my iMac on Saturday after years with a PC, I am still finding my way around everthing and it's not proving to be the big issue that I thought it could be, love the screen, love the keyboard, not sure about "Micky" though.
I have a question for an expert amongst you, when you have a window open, as in the one that I'm typing this into, there are 3 buttons on the top left of the window to close, minimize etc.
I found out today whilst browsing in a local shop that these should have colours attached to them,
as seen green red and I think amber, I have no colours on my buttons and I WANT THEM.
Pointers on how to get these glowing correctly would be appreciated. I cannot see settings for them so assume they have a default action on startup.
The answer is ????
PeterGo to the System preferences > View > Appearance
Select "Blue" instead of "Graphite", now the windows have colored buttons.
Unfortunately with the Graphite appearance you don't get the colored buttons, I still don't know why Apple made that choice. -
Windows 8.1 apps exit and minimize buttons
The close and minimize buttons disappear after 3 seconds in windows 8.1 apps and don't come back i used alt+tab to exit the app
does anyone know how to fix thisHi n_man2000,
You need to move your mouse to the top of the screen and then click the
Close button in the title bar.
For more information about how to close an APP in Windows 8.1, please check:
How do I close an app?
If I misunderstand something, please let me know.
Best regards
Michael Shao
TechNet Community Support -
How to change default close maximize and minimize button in mac?
How can I change default close, maximize and minimize button in mac?
no. but you can make resizable.
-
No close, restore and minimize buttons when Firefox 4 is maximized with Win 7 Aero
Since upgrading to FF 4.0, I have had some weird behaviour with the top taskbar, transparency, and close/restore/minimize.
When I maximize the FF window, I see the top sectino ofthe application window (with FF menu), then address bar, then bookmarks toolbar, then tabs. In the top taskbar, however, there is not close/restore/minimize section at the top right. Clicking or mousing over doesn't change anything in that area. I can restore or minimize the window using keyboard shortcuts (alt-space > r, etc.).
Is this by design? If so, it's a bit annoying to no longer have one-click access to these common window operations.
Maybe a separate issue and maybe not: When I restore the window down to a non-maximized size, the Aero transparency behind the top section as well as the address bar go away -- I get an ugly black background instead. Also, still no close/restore/minimize.
Not sure if these issues are a failure to fully comply with Aero, or a bug, or just a misguided feature..
I have tried resetting everything in FF to defaults, and, also disabled add-ons like Synch, Awesome screenshot, ReaditLater, and Xmarks which have their own buttons.
Looking forward to your input.Any news on this.
I think it has something to do with the add on : Tabgroups manager.
If i disable this add on then everything works normally.
Also when this add on is enabled my tabs are always below adress bar ,no matter what. -
while opening pdf files the menu bar, navigation bar cracks unobviously and also close and minimise buttons goes hidden..Facing the problem for last one month. Please help.
The latest Kaspersky software version is 15.0.1.415 or 15.0.1.415ab.
-
How to disable the maximize and minimize button of JDialog
How to disable the maximize and minimize button of JDialog. I have an application which has JDialog box, but in that i should not have maximize and minimize button.If any one come across this problem and got a solution please helpout me.
Btw, isn't it a little strange to ask thisquestion...
Actually, I thought it was meant to be sardonic...
Dialogs don't have those buttons, so the question
n should be to the OP how did he/she get them in the
first place? Cuz they aren't using JDialog to do it,
unless it's something to do with a specific look &
feel.I somehow missed that, good point :-) -
there's no "close,Restore Down,minimize"button on the top of the FF4 ,My system is win7 how can i do with it
== This happened ==
Every time Firefox opened
== i have installed the FF4Here is how to go to the default theme in case you don't know how to.
1. Press '''ALT''' to reveal the menu bar
2. Go to '''Addons, Themes''' and enable '''Default Theme''' to reveal your Buttons.
(IF you are using Menu bar then just go to '''Tools--Addons--Themes''' -
The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications. Does anyone know how to get those buttons back? I guess I could just switch betwen appliations, but I am used to doing it the other way.
You're welcome
You had Safari in full screen mode. -
I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?
For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.
-
I updated to lion and now don't have a minimize button in the new emails i am writing. Do i really have to save it as a draft to be able to have multiple emails in progress? Or am I missing something obvious?!
Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html -
Problem activating the back and exit button with the ALV using OO
I have wrote my first alv using Methods.My problem is that i can't activete the BACK and EXIT button in the standart toolbar .
Look my code please .....
Without PF-STATUS can i do it ?
*& Report YDP_DOUBLE_ALV
REPORT YDP_DOUBLE_ALV.
TABLES : YQM_CERT , MARA , YOUTPUT_APPL.
DATA : ALV_GRID TYPE REF TO CL_GUI_ALV_GRID,
CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
FIELD_CAT TYPE LVC_T_FCAT,
LAYOUT TYPE LVC_S_LAYO.
DATA : ALV_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
CUSTOM_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
* FIELD_CAT TYPE LVC_T_FCAT,
* LAYOUT TYPE LVC_S_LAYO.
DATA: DYNNR TYPE SY-DYNNR,
REPID TYPE SY-REPID.
DATA: OK_CODE TYPE SY-UCOMM.
DATA : BEGIN OF ITAB OCCURS 0.
INCLUDE STRUCTURE YQM_CERT.
DATA END OF ITAB.
DATA : BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE YOUTPUT_APPL.
DATA END OF ITAB1.
* MODULE DISPLAY_ALV OUTPUT
MODULE DISPLAY_ALV OUTPUT.
SET PF-STATUS 'ZST9'.
PERFORM DISPLAY_ALV.
ENDMODULE. "DISPLAY_ALV OUTPUT
"DISPLAY_ALV OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
START-OF-SELECTION.
LAYOUT-ZEBRA = 'X'.
LAYOUT-GRID_TITLE = 'YQM_CERT'.
LAYOUT-CWIDTH_OPT = 'X'.
LAYOUT-SMALLTITLE = 'X'.
SELECT * FROM YQM_CERT INTO ITAB.
APPEND ITAB.
ENDSELECT.
SELECT * FROM YOUTPUT_APPL INTO ITAB1.
APPEND ITAB1.
ENDSELECT.
CALL SCREEN 100.
END-OF-SELECTION.
*& Form DISPLAY_ALV
* text
FORM DISPLAY_ALV.
IF ALV_GRID IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER
EXPORTING
* PARENT =
CONTAINER_NAME = 'CC_ALV'
* style =
* LIFETIME = lifetime_default
REPID = REPID
DYNNR = DYNNR
* NO_AUTODEF_PROGID_DYNNR =
* EXCEPTIONS
* CNTL_ERROR = 1
* CNTL_SYSTEM_ERROR = 2
* CREATE_ERROR = 3
* LIFETIME_ERROR = 4
* LIFETIME_DYNPRO_DYNPRO_LINK = 5
* others = 6
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT ALV_GRID
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
I_PARENT = CUSTOM_CONTAINER
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
* I_FCAT_COMPLETE = SPACE
* EXCEPTIONS
* ERROR_CNTL_CREATE = 1
* ERROR_CNTL_INIT = 2
* ERROR_CNTL_LINK = 3
* ERROR_DP_CREATE = 4
* others = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'YQM_CERT'
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
IS_LAYOUT = LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
* IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = ITAB[]
* IT_FIELDCATALOG =
* IT_SORT =
* IT_FILTER =
* EXCEPTIONS
* INVALID_PARAMETER_COMBINATION = 1
* PROGRAM_ERROR = 2
* TOO_MANY_LINES = 3
* others = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL METHOD ALV_GRID->REFRESH_TABLE_DISPLAY
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
* EXCEPTIONS
* FINISHED = 1
* others = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "DISPLAY_ALVHi
U need to active them in your status ZST9.
Max -
Federated Book showing strange maximize and minimize buttons
Hi all,
I've just federated a book (.book file) in WLP 10.3.2 and when it shows up in the consumer the buttons to maximize and minimize appear.
The behave of the book is as if it were a portlet. As I can remember, it didn't happen in the 10.3.0 version.
When I put a local book in the desktop instead, this thing doesn't occur.
Could anyone explain what is happening?
Thanks in advance,
LeandroHi
I've gotten the same behavior. If any one could help, I would appreciate.
thanks in advance -
My iPad has froze. How do I unfreeze my iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
Maybe you are looking for
-
Ipad Mini imessage not sending messages over wifi
I've my ipad mini for a couple of days now and I've consistently run into imessage problems. I can surf the web, use apps that require Internet (ie. Facebook, Pinterest, mail, etc.) but it seems like imessage refuse to work. My imessage is working an
-
High kernel_task RAM Usage in Yosemite 10.10.1
Hello All, No matter what I'm running, I always have high RAM usage with kernel_task. I've looked around the other threads and never found a definitive solution. I wouldn't call it crippling to my system but I would like to resolve the issue. Below i
-
How to remove the space marked other on an iPhone 6 Plus?
I recently purchased an iPhone 6 Plus and I can't for the life of me remove all that space marked other. I know that apple devices save a lot of data from apps and such into that category, but I've never built up this much into that category. My iPho
-
Unable to Export Movie (Error code = -32766)
I get this error message when I try to export as .flv a short (10 sec) movie created in iMovie using three photographs (for use as flash slideshow on a website). Here's what I'm doing: Share>Export Using Quicktim>Export Movie to Flash Video>Save>Erro
-
I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." Do you know what is going on here--what this problem could be? (I do ha