My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

Try the waveform zoom slider. Recording louder just to get a better visible waveform would be, well, silly.
From the manual: (click on links to see pics)
To change the zoom level using the Waveform Zoom button 
Click-hold the Waveform Zoom button. A slider appears.
http://documentation.apple.com/en/logicpro/usermanual/Art/S01/S0185_WaveZoom.png
Drag the slider. As you do, the waveform shown in all audio regions, and in the Beat Mapping track, is increased or decreased in size.
http://documentation.apple.com/en/logicpro/usermanual/Art/S09/S0931_CUS_Waveform Zoom2.png 
Note: This is a purely visual function. The amplitude (level) of the waveform is not affected.
it's here (scroll 3/4 down):
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=4%26sec tion=6%26tasks=true

Similar Messages

  • The graph dose not shown after running the Customize JSP Page.

    Hi All,
    While creating customize JSP I am facing one problem - The graph dose not shown after running the Customize JSP Page.
    What are the possibilities ? any body has any Idea Please help me

    Hi all,
    I have the same issue! Any solution??
    Thanks
    BI Beans Diagnostics(v1.0.2.0) 11/10/06
    =========================================================
    JDEV_ORACLE_HOME .......................... = D:\jdev1012b1913
    JAVA_HOME ................................. = D:\ORDB10gR2Home\jdk
    JDeveloper version ........................ = 10.1.2.1.0.1913
    BI Beans release description .............. = BI Beans 10.1.2 Production Release
    BI Beans component number ................. = 10.1.2.67.0
    BI Beans internal version ................. = 3.2.2.0.24.2
    Connect to database ....................... = Successful
    JDBC driver version ....................... = 10.1.0.4.2
    JDBC JAR file location .................... = D:\jdev1012b1913\jdbc\lib
    Database version .......................... = 10.2.0.2.0
    OLAP Catalog version ...................... = 10.2.0.2.0
    OLAP AW Engine version .................... = 10.2.0.2.0
    OLAP API Server version ................... = 10.2.0.2.0
    BI Beans Catalog version .................. = 3.2.2.0.24
    OLAP API JAR file version ................. = "10.1.0.5.0"
    OLAP API JAR file location ................ = D:\jdev1012b1913\jdev\lib\ext
    Load OLAP API metadata .................... = Successful
    Number of metadata folders ................ = 1
    Number of metadata measures ............... = 23
    Number of metadata dimensions ............. = 8

  • How can I change the gain on one audio track in the selection?

    How can I change the gain on one audio track in the selection? Is there a way to adjust the gain as it is implemented for example in cubase - pull waveform up and gain varies?

    I'm not sure what you mean by "in the selection", or, more honest: I don't understand that at all.
    So, instead I'm going to tell you that you can indeed adjust the Gain of one or more selected region(s) in the Region inspector on the left hand side.

  • I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

    I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

    Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

  • Passing the values from the graph when we use Navigate to the BI Content

    Hi,
    The following are the problems which we are facing when navigating to the other BI report.
    1)When using the “Navigate to BI content” action the values are not getting passed to the detail report from the graph. Is there any limitation or any alternative to make it work?
    When I click on the Bar graph I need to pass the corresponding period and the dimension (EX: Operating Unit – Vision Services R+D) to the detail report.
    2)I have tried using the “Navigate to Web page” action. I am able to pass the values but the page is getting opened in another window. I want that page to be opened in the same window so that my presentation variable values are not lost.
    3)When I click on the bar graph, I am able to pass the values period and operating unit. But my presentation variable values are lost. I want to retain them.
    Please help me out in achieving this scenario.
    Thanks,
    Chaithanya

    Hi,
    In the column properties give the navigation to other reports from the interaction tab and make a chart with the column and in the dashboard -->edit dashboard-->in the section where the report is placed--->give 'drill in place'.
    Regards
    MuRam
    NOTE: Please mention if this resolved your problem/still facing and close the thread.

  • FOR THE FIFTH TIME - lost audio FF 4.0.1 Windows Ultimate

    Where do I find answers? I have reported this problem 4 times before. I have no audio with FF 4.0.1 running on Win 7 Ult. No problem with any other browser nor any other app.

    Thanks to those who offered a solution. I finally found the answer and here are the steps to solve the no audio problem.
    1- Make sure that QuickTime is up-to-date and working properly
    2- Open a URL running audio
    3- Open the Volume Mixer (Speaker icon on bottom right corner on screen)
    4- Make sure none of the choices are muted and that volume is set at a reasonable level.

  • What is the Toggle feature on Audio recordings???

    This feature seeems to be automatically turning its self on every so often. When I record a vocal track it like duplicates and then creates 2more tracks which are highligted.  It really confuses me and I dont know how to turn it off. Its like it shades on take out (region) and then when I try to erase it I end up erasing other takes way further back in the track??? I know its probably a useful feature but I havent a clue what its for, how it works and its destroying my track, making me lose lots of good vocal takes and confusing the life out of me!!
    Any help on this, the word COMP seems to appear in a lot of the regions, I take it that means Compare or something??
    Any help on turning this off is greatly recieved!!

    Ok Il check that out, now that I know what its actually called! Comping!
    Strange how its been set up to be on when I never selected it! But I have recently upgraded from a very old Express 7 to Logic Studio!
    Il get reading my manual and hopefully lose no more precious takes!
    thanks

  • CR XI - Problem Setting Line Graph colors in the Chart Expert

    Post Author: desselle
    CA Forum: Charts and Graphs
    Hello,
    I created a Crystal Report (CR) of an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR.  The VB6 app sets the report recordset via code that corrsponds to the .TTX file, and the parameters .  The report contains a Line graph that plots five pieces of data.  The report & graph work good.  CR determines the color of each line on the graph.  However, I need to set the color for each line to correspond to the colors used on our existing reports.  The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
    1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report.  However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
    2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either.  I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
    3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
    Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.
    Thanks,Steve

    Post Author: desselle
    CA Forum: Charts and Graphs
    Hello,
    I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows:  When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below.  ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field.  When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
    Thanks

  • Crystal XI Graph floating bar problem-needs to be like a gantt w/o the date range

    Post Author: mecca
    CA Forum: Charts and Graphs
    Here is my problem I have a min and max range of numbers(not a date)I need plotted along with a value in between the min and max date. All this data, the 3 fields come from sql 2005/vb.net 2005. So, the data is set. I tried a line chart and i got 3 squares with no line, I have the chart under a group on my report. I tried a bar chart but I don't want the graph line to start at the edge of the graph. I tried to stack the bar and then set the min and max colors to white so that I would only see the value line but that did not work either. I have an example of what it should look like but can't upload it.
    so my min is 1.5 max is 5.6 and actual num is 4 I hope this crude example helps.
                xxxxxxxxxxxxxxxxxxxXxxxxxxx
    0                   2                       4                   6                 8   

    Post Author: V361
    CA Forum: Charts and Graphs
    I was able to use a Gantt, then right clicked the dates and selected data (Y) axis options, and clicked on the show axis labels.   Not sure if this will work for you or not.  I ignored the errors about "Gantt charts require 'For each record' and 2 date fields under 'Show Value(s)" If that doesn't help, there may be another way to resolve the issue.

  • I cant see the graph in discoverer viewer whith was created in the desktop

    Hi,
         I need your help!! I have a problem to see a graph in Discoverer viewer. I will detail you the steps that I follow;
    It was a difficult calculate report to results by Discoverer so, I create a view in the data base which show 3 field, Periodo(number) which is a union whit other field from other folder, State(varchar), Requirement(number).
    From the discoverer desktop y have a crosstab worksheets and a graph, there I can see it without problem, but in the Discoverer viewer I can see the graph.
    I tried to set the worksheets options in “show options” to show me the graphs too, but this options didn’t appeared there. Somebody know what I should have to do to see it?
    On the other hand I changed the “show null values show” option since null to empty, and when I wanted to save the change this error appeared;
    “Oracle BI Discoverer don’t had to found the necessary values to show the events…”
    Thanks for your help!
    Regards
    Dora

    Hi Dora,
    The graphs that you create using Discoverer Plus will show nicely in Viewer. Everything you develop in Pluys works in Viewer. They are companion products.
    You must realize that Discoverer Plus/Viewer and Desktop are two seperate product sets and they use different techniques for graph creation. There are other differencies between the two that suggests that you need to develop all reports using Discoverer Plus in stead of Discoverer Desktop.
    I have experienced workbook created in Plus being destroyed when opened and saved using Desktop. So for a long time I have simply forgotten all about Desktop. If your company is relying on both Viewer and Dersktop I suggest that the time has come to change strategy and technique.
    If you need sparring please mail to [email protected]
    Good Luck!
    Cheers
    Niels Jessen

  • How come two signals of the same frequency show on the graph as having the same?

    Hi!
    My assignment for school is to build a 2 channel oscilloscope, with generators too. Initially, I tried using a waveform chart, that actually showed a very "ugly" image. Just for testing, I left the chart there with hidden indicator.
    The student teacher suggested I use a graph, which is ok, as far as the shape of the signal. The "time" axis however doesn't really show the time.
    Thinking that it might show the samples, I put at the "nr.of samples" the reciprocal of the sampling rate multiplied with 1000,000 and the result was the same. The really strange part is that if I'd put two different frequencies for each channel it showed as is the signals had the same frequency.
    And that's not the only problem... The while loop everything is in doesn't look like it's executing more than once. Now, I know the vi is pretty large but is that what makes it behave like that?
    I also put cursors (like in the example from Fundamentals> Graphs and Charts > Programatically Control Cursors) that should be in the middle of the graph. Since I didn't use a chart, are the values at "Style" or "Pointer Style" different? (I wanted the cursors to be multi-plot).
    Can you help me with any of that?
    Thank you very much!
    Patricia

    Hi Patricia !
    First of all, I would suggest you to synchronize all actions according to data flow concept : try to link all property nodes with error wires... That way, you MAY notice some warnings/errors. Then you should try to group functionalities into clusters, that way your code would be easier to debug...
    Then your While Loop runs as fast as possible (which makes your processor to run at 100% all time long), you should consider using a timing function to slow down the loop.
    Then using "Graphs", the X-axis will display the number of samples in the array to plot. If you know the sampling frequency of your signal and the number of samples in the array, you can try use "Xaxis.Multiplier" property node to convert the number of samples into time.
    Then for your cursors, you should consider using "Cursos List" property node... It's not really cool to program it (lot of options) but it works very well and allows you to deeply customize your cursors.
    I hope this helps... Otherwise, don't hesitate to post another message !
    Zyl

  • Problems with 1.5 and vista - audio recording

    Hello.  I have PP 1.5.  I have an Audio Techinca AT2020USB microphone.  I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio.  On the computer that runs Vista, I can not.  Is anyone aware of any patch or anything that will allow me to make this work?
    Please, advise.  Thank you.
    bobhugejunk

    YOU ARE THE MAN!!!!  It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
    Thank you!
    Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
    Date: Wed, 21 Oct 2009 19:34:20 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problems with 1.5 and vista - audio recording
    As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
    Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
    Good luck,
    Hunt
    >

  • How to show the graphs from 16channels or more at one time

    Hi.
    I am using labview with pci-6031e board.
    Is there a efficient way to show the graph from 16 channels which acquire the temperature with thermocouple, or to show just one specific graph that I want.
    I followed these steps.
    1.in examples from the labview program,I`ve used the source of acquring the multi-temperatures.
    2. used the index array to devide each temp. and connected this to graph in the case structure.
    but it requred too many space,and doesn`t look good.
    Thank you .

    You can set a state machine doing the following: Put 17 controls, one for each temperature and one for all. Inside the case structure, wire one case for each temperature, bundling x and y arrays into a cluster, and then building an array (of 1 element). In the all case bundle each temperature and build an array of all. Put the array output into the graph... and it's done.
    Hope this will feed your needs, and if you want an example... just ask

  • Dynamically changing the Graph in Obiee 11g

    Hi,
    Is there a way to reflect the latest data in a graph by clicking any hierarchy level ?
    say i have top level company----->>department------->>account.
    if i come to department level then the graph should display department data in the graph.But in my case ,the graph always shows company level data.
    Thanks-Bhaskar

    Hi ,
    In Repository File try creating a parent root node called 'All' above the Department in your hierarchy and check it it will work ...
    Edited by: 977942 on Jan 15, 2013 3:08 AM

  • How to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area

    how to add a scroll bar within a view window ?I want to display x and y axis outside the scoll window and keep those axis static and move the graph within scroll area
    ananya

    Hey Ananya,
    I believe what you want to do is possible, but it will not be
    easy.  If you want to add a scroll bar that will scroll the graph
    back and forth but keep the axis set, you would want to add a
    horizontal or vertical scrollbar.  Then you would create an event
    handler for the scroll event.  You would have to manually plot
    different data within this scroll event.  Unfortunately, there is
    not really a built in way to do this with the Measurement Studio plot
    control.
    Thanks,
    Pat P.
    Software Engineer
    National Instruments

Maybe you are looking for