My problem is to synchronize Lightroom 4 with Elements 11.

I have another computer with Lightroom 4 and Elements 10 and there is no problems to operate from Lightroom to Elements. I have tried almost everything and spent several hours to find a solution. My both computers are new HP Pavillion and have Windows 7. What shall I do?

You can try to use the link below & I hope that would be helful to you!!
http://www.photoshopelementsuser.com/html/integrate-lightroom-with-elements/
Mandhir

Similar Messages

Problem importing pictures from camera with Elements Organizer

I am using Elements Organizer from Photoshop Elements 9 (Mac OS 10.6.8). Recently, the files imported from my camera are being stored on my hard drive with the permissions set so that only the owner of the files can read them. Previously, anyone could read them. I must have accidentally changed something in Elements Organizer.
How do I set things back to how they were so that everyone can read the files imported from the camera? Is there a way to reset the default settings for Elements Organizer?
I can get around this by setting the permissions for the folder of pictures from the Terminal window, but this requires that I remember to do so after each import.
Java Jay

You can use the app PhotoSync to wirelessly transfer the pictures to your computer while maintaining your folder structure.

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!

Has anyone had a problem with elements 9? I am in editor and cannot get out. It states I have to com

I am having a problem with Elements 9. It states the editor command is busy and cannot process my next request. If their is anyone out there that can help I would appreciate it. I am presently lockout from performing any other function. Cheryl

This is an Adobe Acrobat forum not a PhotoShop Elements forum. You might want to repost in the appropriate forum.

Using Lightroom in Conjunction with Elements

I currently use Elements 10 (and love it) and am considering purchasing Lightroom 5. However it seems like the lines between some of the Adobe products is getting blurred. Photoshop Elements seems to be getting more of the capabilities of Photoshop CS. And from what I've read and looked at on Lightroom, it doesn't seem like it really can do anything that Elements cannot do, other than do some functions easier, one example being straightening.
First question: If I have both Elements and Lightroom, can someone give me one or more practical (and not overly complex) examples of using both together on a single photo? Please don't include functions that are available in both pieces of software, unless it gives superior results that can be obtained by one but not the other.
Second question: I don't use raw (yet), so if editing a jpg with both Elements and Lightroom, doesn't it have to be saved in one before editing in the other? Or is there some type of interface that is available between the two pieces of software where you can edit first in one and then in the other without saving in between? Obviously I am asking because I am aware of the loss of info due to compression when doing multiple saves and opens on a jpg. Yes, saving at level 12 might minimize it but there would still be loss of info*.
* Now that I finished the question, I think I know the answer. If editing first with Elements, save it as a psd rather than a jpg, then open the psd in Lightroom (is psd a common extension in both?), make the additional mods, and save it as a jpg. This way there is only one save of the jpg. Does that work?
Thanks.

However it seems like the lines between some of the Adobe products is getting blurred.
Seems like? No, the capabilities of these two programs definitely overlap.
And from what I've read and looked at on Lightroom, it doesn't seem like it really can do anything that Elements cannot do, other than do some functions easier, one example being straightening.
Things like layers and magic extraction tool and a whole bunch of other PSE editor tools are not available in Lightroom.
First question: If I have both Elements and Lightroom, can someone give me one or more practical (and not overly complex) examples of using both together on a single photo? Please don't include functions that are available in both pieces of software, unless it gives superior results that can be obtained by one but not the other.
In my opinion, the only sensible workflow is as follows: import into Lightroom, organize in Lightroom, edit in Lightroom (do as much editing in Lightroom as possible) and then transfer the photo to PSE for additional editing that cannot be performed into Lightroom; return edited photo from PSE to Lightroom. I point out that many people find that the editing in Lightroom is powerful enough so that only a small percent of their photos need the additional editing of PSE.
Second question: I don't use raw (yet), so if editing a jpg with both Elements and Lightroom, doesn't it have to be saved in one before editing in the other?
None of the capabilities of Lightroom are limited to RAW photos. After you edit a photo In LR and want to send it to PSE, the built in LR function called "Edit In..." will make the copy for Elements to use, launch PSE (if it is not already opened) and allow you to do your edits. Then you save the edited photo (not Save As...) and Lightroom will recognize the changes made in PSE.
Obviously I am asking because I am aware of the loss of info due to compression when doing multiple saves and opens on a jpg. Yes, saving at level 12 might minimize it but there would still be loss of info*.
In the process I described, there are two such saves (one by LR and one by PSE). You could eliminate the quality loss (at the expense of much larger files) by telling LR to create a TIF instead of a JPG for editing in PSE.

Anyone having problems with activating Lightroom with Adobe CC?

I'm new to Adobe CC and I'm having some troubles with activating my Lightroom with Adobe CC. I payed for Lightroom and Photoshop CC and I didn't have any problems the last month, but since the new month has begun, I cant seem to figure out how to activate Lightroom again.. Can anybode help me?

This is the message I get every time I open Lightroom (picture above), and underneath is the invoice from Adobe CC, showing that I already have paid for the month.. Am I doing something wrong?

Warning: Problems occurred during synchronization in Charm with virtual sys

Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swati

hi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have tak

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1. i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!! jan

If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
    for(int k = 0; k < symbols.length; k++){
        String symbol = symbols[k];
        if(s.equals(symbol))
            return k;
    }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

Problems with elements 12 how do I re install?

Problems with Elements 12, how do I reinstall. Downloaded on line

Hi Scott,
Backward licensing policy is only if you purchase volume license but not applicable for retail license.
Please refer the Backward licensing policy at : https://blogs.adobe.com/ukchannelnews/2011/06/16/licensing-downgrade-rights/
http://www.adobe.com/volume-licensing/policies.html

Printing Problems with Elements 11

I have just started with Elements 11. At first it printed ok. but when I tried to set it up with Elements to control the printer ( Epson SX400 ) I keep getting a message saying that ICC Profile is invalid, and the program will not let me print at all. My computer O/S is Windows 7, 64 bit. the Printer driver is one supplied by Epson EU to run the O/S.
I have tried returning to Printer controls settings, this has not worked. I have tried to print on a different printer (Brother HL-2250DN Laser Printer) this will not print either.
I have tried to print on my old Serif PhotoPlus program this is OK. So the problem is in my settings for Elements 11,
Do I Need to Reinstall the programme
Andy H

I would explain you the steps you need to follow if you are giving control to Photoshop Elements to manages color.
Step 1- Select your printer and then Click More Options at the bottom left of the Print window.
Step 2- No click on Color Management tab.
Step 3- Now from "Color Handling" drop down select Photoshop Elements Manages color. As you select this option "Printer Profile" drop down will become enable.
Step 4- If Image Space is sRGB then select sRGB profile from Printer Profile drop down else select Adobe RGB.
Step 5- Click On Printer Preferences button. It will open your printer's preferences dialog.
step 6- Now click on "Main" tab and then click Advanced button.
step 7- Now under "Color Management" section please select No Color Management here.
step 8- Click OK and come back to main Print dialog of Photoshop Elements. Now click Print.
Note -If you choose Photoshop Elements manages color, it is very important that you disable color management in your printer driver.Letting the application and the printer driver simultaneously manage colors during printing results in unpredictable color.
Try with above written steps I hope it would help.
Cheers !!!

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

I'm upgrade from PC to iMac can I just purchase upgrade revision of Lightroom 5 I currently have 4 and not pay the full version price? Same with Elements 12? Thanks

I'm upgrade from PC to iMac can I just purchase upgrade revision of Lightroom 5 I currently have 4 and not pay the full version price? Same with Elements 12? Thanks

lr and pse are both cross-platform apps so you can use both pc and mac versions with those programs.
for most adobe apps though, How to Move Adobe CC or CS6 Between Computers, or PC to Mac | ProDesignTools

Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.

Can't launch the organizer in Elements 13. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This happed with Elements 11, too.

juliana
Do you have any version of Premiere Elements 13 or only Photoshop Elements 13 which comes with Elements Organizer 13?
Let us look at the following for Elements Organizer 13....
1. Deletion of disabling the Elements Organizer 13 setting file which is named psa.prf. In Windows 7, 8, o 8.1 64 bit, it is found in the
path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Elements Organizer
13.0
Organizer
and in the Organizer Folder is the psa.prf file that you delete or disable by renaming it from psa.prf to psa.prfOLD.
2. If the above gains you successful entry into the Elements Organizer 13, then you can
a. create a new catalog
and/or
b. repair or optimize the current one
See Elements Organizer 13/File Menu/Manage Catalogs/Catalog Manager.
3. There are times that certain formats will bring the Elements Organizer down when you try to import those formats into
it. But, from what you wrote, your current problems do not sound media related.
3. At your earliest opportunity, please update Elements Organizer 13 to 13.1 using its Help Menu/Updates.
Please review and consider and then let us know the outcome.
Thank you.
ATR

My problem is to synchronize Lightroom 4 with Elements 11.

Similar Messages

Maybe you are looking for