My problem using iPhoto Having the horizontal lines going through the photo when printing of a website

My problem is using the I Photo and printing a picture with horizontal lines going through it

Your topic title and topic content are a bit confusing? Are you printing a website page? That would be thru Safari or other browser.
Or is a photo from a website? If so how was it imported into iPhoto?
Also what system and iPhoto version are your running?
Does the photo print correctly from Preview or other application?
What's the pixel dimensions of the image?
How much free space do you have on your boot drive?

Similar Messages

Horizontal line going through the screen on retina display

The line is from right to left as pictured. It only shows up on certain colors, but it gets very annoying with any movie playing. On dark blue and burgundy backgrounds the line is a black color. Any help would be much appreciated. Thank you

When I first saw that line on my original 20" iMac I thought it was another artifact of the screen controller on that machine that had a lot of problems (need to get it fixed now that I have my PB to fill in. However, I then saw the same line on my wife's 12" PB and now on my new 15". If you are seeing the same as I am (faint grey line dead center of the menu bar) then I think it is just part of the 3D effect in OSX.

Ipod first gen. has horizontal lines going across the screen. What should i do?

My iPod first generation has horizontal lines going accross the screen and sometimes the screen goes completely white. How do I fix that?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

My friends iPhone 6 Plus has lines going through the screen. Does anyone else have this problem?

Help? There are white lines going through the right side of screen. I reset the phone and restored it, I don't think its software.

is it still a hardware issue ?
I am seeing from last 2-3 days or i realized in last 2-3 days but am keeping seeing every 1-2 hrs apart the lines keep coming and phone also acting especially in the areas of touch response. I am on latest 8.1.3 version .
At least i know that i am not alone.

Display: Gray horizontal line going through center of Menu Bar?

I have this strange grey line going through the center of the Menu Bar, al the way through, difficulting the reading of the symbols! Please advise. Thanks, Diego
Powerbook G4 1.67 High Mac OS X (10.4.5)

When I first saw that line on my original 20" iMac I thought it was another artifact of the screen controller on that machine that had a lot of problems (need to get it fixed now that I have my PB to fill in. However, I then saw the same line on my wife's 12" PB and now on my new 15". If you are seeing the same as I am (faint grey line dead center of the menu bar) then I think it is just part of the 3D effect in OSX.

Captivate 5: is there a way to prevent someone from taking the quiz, without going through the conte

Hi.
Is there a way in Captivate 5 to prevent someone from clicking on the quiz to take it, without having gone through the content?
CB.

Hi.
Regarding preventing someone from taking the quiz without going through the content...
I decided to separate the quiz out of the project as a separate item.
We are going to use a Learning Management System which will house the module to control the access.
The LMS can be set to not allow people to click on the Quiz link, until they have gone through the content. (So they cannot by-pass the content and just do the quiz).
I was trying to find a way to control this from within Captivate 5 and keep people from being able to click on the quiz without going through the content. (And keep the quiz inside the original project).
However, this LMS solution will work for this module.
Thanks everyone!
CB

TS3274 my ipad mini is glitching, has lines going through the screen

My Ipad mini's screen starting glitching, has lines going through it.

is it still a hardware issue ?
I am seeing from last 2-3 days or i realized in last 2-3 days but am keeping seeing every 1-2 hrs apart the lines keep coming and phone also acting especially in the areas of touch response. I am on latest 8.1.3 version .
At least i know that i am not alone.

Can I take a video on my iPad 2 while the device is going through the X ray at the airport?

I want to take a video with my ipad while it goes through the X ray at the airport. Is that going to damage my iPad? Do I have to turn it on? I'm working on a video and I though that it could be a nice idea for an scene to have that shot.

You would have to turn the iPad On. Don't believe it would hurt the iPad. The only problem might be that you would be setting the exposure in the lighted area & the Xray machine is probably dark inside.
But I would ask one of the TSA persons first. They might not allow it. They might not like the blinking red light.
 Cheers, Tom

HP LaserJet 3330 shows horizontal lines exactly every 1.5" when printing a completely white page

HP LaserJet 3330 shows seven or eight about 3.5" long cloudy horizontal lines spaced exactly every 1.5" even when printing a completely white page. This occurs also when copying and faxing.
There are also 2 very thin vertical lines running down the whole page approx. in the middle. They are exactly 1" apart.
However, a scan of a white page viewed on my computer (not printed) is completely clean.
Windows 7. No changes or upgrades.
This question was solved.
View Solution.

Propbably the toner cartridge if they are 1.48" apart it could be the developing cylinder or the charging roller that are both in the toner cartridge. So a good guess if you replace the toner cartridge, the problem will go away. The vertical lines could also be part of this issue.

Getting waved-horizontal lines running through my photos...Happens not during time of working image in photoshop...but appears when sending to files or other applications, such as after printing back to files...? Mac checked out OK.

Getting waved-horizontal lines in my imagery just after working in photoshop...sending to files as with after completing some applications, such as printing. Nothing is wrong with my Mac...Issue does not occur every time I go into using Photoshop?

Doesn't matter what kind of file...size, jpeg or tiff, black and white as color, etc...Something is in the software issue for my upgraded CS 5 Photoshop, running on a Mac OSX with Leopard version. The CS 5 Adobe software was in an up-grade from CS 3. Best I can do and I thank you for any suggestions based on your experienced background as I can only offer a general interpretation with the waved-horizontal lines that run across some of my images from being in the Photoshop mode from Bridge.

My iPad first generation has a 2 1/2" gray line going through the center of it.... Noe it has turned blach and has very thin lines of multiple color at the bottom of the black on the lower side only. . IS IT DEAD...

Unable to add image.

I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3

Screen problem Lines going through the screen

Hi i have just noticed these lines on my screen for some reason, i dont know how they have happened the phone has never severely been dropped etc. The touch and everything else is working fine apart from the occasionsal heat problems. Can anybody give me some advice on what this is and how it can be resolved.
Thanks

Hello there, adalnabeel.
The following Knowledge Base article offers some great basic steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Display the horizontal lines whether or not a section is empty.

I am using CR with vb.net 2010 and latest version of CR for net 2010. I want to print a report like a grid which means horizontal and vertical lines appearing whether or not there is text in a section.
I have a box surrounding the report and vertical lines extending down the report. There are two group headers and a details section.    The horizontal lines only appear when there are values in the group or details sections. Thus, once the detail lines end (and therefore there are no more groups either) on a page, the horizontal lines stop though the vertical ones continue. I want the horizontal lines in the sections to continue as well -- just like in Excel.
There is a page break for the top group so there are lots of pages that have detail lines empty. How do I print horizontal lines in those sections as well when there are no values.

hi Suzanne,
there are several different ways of doing this.
1) the easiest way of doing this is to create a new Page Header that contains all of the lines. this works if you've got a report that is static in way that each page is laid out. make the new page header the size of a page in length, move it up so that it is Page Header A, and go to the section expert and set it to Underlay Following Sections. now add the grid lines to this new page header A.
2) another way of doing this is to create a whole bunch of Details sections....e.g B to Z. put lines in these sections. write a conditional suppression formula for each one based on how many records there are in a group. this is way more work.
3) another fairly easy way is to create a formula that outputs the horizontal lines...i.e.
     numbervar N:= 10;
     // you'd need to figure out what N is based on the number of existing records and the number of lines you want
     replicatestring(replicatestring("_",300) + chr(10), N)
make sure that you right click on the formula and go to Format Field > Common tab, and set it to Can Grow.
-jamie

Extra line running through the screen on my Officejet 6500 printer

I just noticed a second horizontal line running through the screen on my Officejet 6500 printer screen (right through where the ink levels show up.) The screen resembles graph paper. What causes this? Is there something wrong with the machine? Can something be done to correct it?

Hi there,
A full factory reset may not be required. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

My problem using iPhoto Having the horizontal lines going through the photo when printing of a website

Similar Messages

Maybe you are looking for