My probook 4420s lap is getting shut down frequently

My probook 4420s lap is getting shut down frequently for the last two weeks. Whenever I start d lap, it gets opening normally and after few minutes, it gets power off without showing any error messages. What to do..? Once I tried d hard disk checking before the booting, but it was shown that "heard could not find or missing".

Hi,
Thank you for posting in the HP Support Forum.
In addition to what @visruth has written, you can also try to download Speccy - http://www.piriform.com/speccy
This is free software for system information and it can show/measure the temperature of some of the computer components.
In my opinion your problem looks like overheating issue. When the computer's fan is not working, it overheats (especially if the CPU/HDD are overloaded with some tasks) and stops working (powers down unexpectedly with no messages) to prevent damage. If this is the case, it would be good to monitor the temperature.
If this is the case, authorized HP Support Center should be able to help you fix this. If you are not sure where such is located, you can contact the nearest HP contact -> http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Best wishes,
IT_WinSec
Hewlett-Packard employee | HP Enterprise Services
Although I work for HP, I express my personal opinion.
Visit www.hp.com/makeitmatter
--Say "Thanks" by clicking the Kudos Thumb Up in the post that you find useful.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

After upgrade to iOS 8, My ipad is getting shut down intermediately.

After upgrade to iOS 8, My ipad is getting shut down intermediately. Even while surfing net also it happens. Earlier I thought it may be due to any software/game which is not compatible. But it happens during surfing net on Safri. No option to move back to iOS 7.

Hi BalajiPrusty,
If your iPad shuts down intermittently, I would suggest that you troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting - note: the article is for iPhones but this section is relevant to iPads as well.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

Report Builder get shut down... without generating any Error Message

Hi Every One,
I am generating the reports in Report Builder 10.1.2.0.2. And the report is based on the view, when I want to generate the PDF, the report builder get shut down without generating any error message. But I can run the report to see live Preview (Paper Design ).
What can be reason that its not generating PDF file format.
Thanks in Advance for your time.

Hi Saumen,
I don't think so that .. I have memory problem or some other issue on the hardware side .. bcos I used the same report builder on same machine against the same instance.. to generate the 70K pages PDF file ... but nothing happened ...And this report is fetching only 10 records. during the execution of the report, Report Builder get close. without generating any message. without keeping any processor busy.
I am feeling that report builder try to write in the PDF file format .. but unable to write.. may b some thing is wrong on the privileges side of the VIEW. But I have Select Priv on the view.
When I try to trace the report, I got the message in the trace file that " Report Aborted on user request"
Thanks,
Mohsin

Some times my mac not getting shut down, some times my mac not getting shut down

some times my mac not getting shut down, some times my mac not getting shut down
it will show white scree for long time and will not shut down

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Post the messages logged during the time when you had the problem – the text, please, not a screenshot. For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time. If the problem is a crash or a shutdown hang, post the messages from before the boot time, when the system was about to crash or was failing to shut down.
Edit out excessive repeats and personal information, if any.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search the archived log, and if necessary the older ones below them, for the same information.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs – they're very long and not helpful.

Every time I try to turn on Genius in iTunes, iTunes get shut down - I'm using a Windows 7 pc with iTunes 10.5.1

Every time I try to turn on Genius in iTunes, iTunes get shut down - I'm using a Windows 7 pc with iTunes 10.5.1.
It started after I bought a new PC, everything worked fine at the old one.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Hello, my itunes app is getting shut down every time I want to open it. Ever since I downloaded the last two updates. I tryed repearing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes

Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?

Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

SAP EP is getting shut down very often

Hello All,
              Our EP Portal 7.0 is getting shut down vey often..After restarting it is working for few hours but again getting down.
OS=Windows 2003 server.Ram size=8GB
Database=SQL server 2005.
We are using HA sytem & MSCS Cluster.
Sending you the default trace before shut down.Please help me.
com.sap.bc.krn.enqu.EnccliMultiplexHandle.connect(EnccliMultiplexHandle.java:355)#
#1.5 #001CC4461575007B0000BA66000013C8000473B606F07A96#1253125544468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.ReadRunnable.run(EnccliMultiplexHandle.java:980)#
#1.5 #001CC4461575007B0000BA67000013C8000473B606F07ABC#1253125544468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.lang.Thread.run(Thread.java:534)#
#1.5 #001CC4461575007B0000BA69000013C8000473B6070F00E4#1253125546468#com.sap.engine.core.locking.impl3.LockingManagerImpl##com.sap.engine.core.locking.impl3.LockingManagerImpl.jenqulib####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error#1#/System/Server#Plain###Encomi: negotiation failed (Connection reset), close connection#
#1.5 #001CC4461575007B0000BA6A000013C8000473B6070F011D#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###java.net.SocketException: Connection reset#
#1.5 #001CC4461575007B0000BA6B000013C8000473B6070F024A#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.net.SocketInputStream.read(SocketInputStream.java:168)#
#1.5 #001CC4461575007B0000BA6C000013C8000473B6070F026B#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.net.SocketInputStream.read(SocketInputStream.java:90)#
#1.5 #001CC4461575007B0000BA6D000013C8000473B6070F028A#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EncomiHandle.negotiateParameters(EncomiHandle.java:866)#
#1.5 #001CC4461575007B0000BA6E000013C8000473B6070F02AA#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EncomiHandle.Connect(EncomiHandle.java:276)#
#1.5 #001CC4461575007B0000BA6F000013C8000473B6070F02C9#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EnccliMultiplexHandle.connect(EnccliMultiplexHandle.java:355)#
#1.5 #001CC4461575007B0000BA70000013C8000473B6070F02E9#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.ReadRunnable.run(EnccliMultiplexHandle.java:980)#
#1.5 #001CC4461575007B0000BA71000013C8000473B6070F0309#1253125546468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.lang.Thread.run(Thread.java:534)#
#1.5 #001CC4461575007B0000BA73000013C8000473B6072D899D#1253125548468#com.sap.engine.core.locking.impl3.LockingManagerImpl##com.sap.engine.core.locking.impl3.LockingManagerImpl.jenqulib####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error#1#/System/Server#Plain###Encomi: negotiation failed (Connection reset), close connection#
#1.5 #001CC4461575007B0000BA74000013C8000473B6072D89D5#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###java.net.SocketException: Connection reset#
#1.5 #001CC4461575007B0000BA75000013C8000473B6072D8B02#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.net.SocketInputStream.read(SocketInputStream.java:168)#
#1.5 #001CC4461575007B0000BA76000013C8000473B6072D8B23#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.net.SocketInputStream.read(SocketInputStream.java:90)#
#1.5 #001CC4461575007B0000BA77000013C8000473B6072D8B42#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EncomiHandle.negotiateParameters(EncomiHandle.java:866)#
#1.5 #001CC4461575007B0000BA78000013C8000473B6072D8B68#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EncomiHandle.Connect(EncomiHandle.java:276)#
#1.5 #001CC4461575007B0000BA79000013C8000473B6072D8B87#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.EnccliMultiplexHandle.connect(EnccliMultiplexHandle.java:355)#
#1.5 #001CC4461575007B0000BA7A000013C8000473B6072D8BA6#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at com.sap.bc.krn.enqu.ReadRunnable.run(EnccliMultiplexHandle.java:980)#
#1.5 #001CC4461575007B0000BA7B000013C8000473B6072D8BC5#1253125548468#System.err##System.err####n/a##8e324b70a2d811de9809001cc4461575#Thread[SAPEngine_EnquReader,5,main]##0#0#Error##Plain###     at java.lang.Thread.run(Thread.java:534)#

Hello Raghu,
                      I have checked std_server<x>.out file & no error I have found..I am pasting the dev_jrfc.trc file.
2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     32
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:38:11,173<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:38:11 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     33
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:38:20,126<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_NUC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:38:20 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     34
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:38:21,126<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:38:21 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     35
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:38:38,126<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_NUC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:38:38 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     36
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:38:39,142<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:38:39 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     37
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:39:10,110<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_NUC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:39:10 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     38
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:39:13,032<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:39:13 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     39
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:40:14,203<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_NUC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:40:14 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     40
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
Error> occured >Sun Sep 20 21:40:17,203<
RfcException:
    message: Connect to SAP gateway failed
Connect parameters: TPNAME=SLD_UC GWHOST=goatlapp29qa GWSERV=sapgw02
ERROR       partner '10.196.2.147:sapgw02' not reached
TIME        Sun Sep 20 21:40:17 200
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     41
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION

How long before it gets shut down?

It seems when someone has an unflattering complaint about Verizon it quickly gets shut down to a "private portal" which is a fancy name for the private chat with some random rep. I've been a customer since the end of July, last month not only was my bill completely screwed up, but the wrong amount was also overdrawn! I was promised things were resolved and again I receive a bill for $25 over the amount I was promised for internet!! I'm working with the BBB, well trying to, it says that my complaint was sent to Verizon and I'm guessing no word back yet.
I'm not wasting 20 minutes in chat or on the phone. I only write with he name of the Rep that I'm told has to fix this, asking her to please call. I actually don't blame her, she's been very apologetic and helpful. Her own coworker that sits next to her didn't pass on a message once. So it's Verizon as a whole that does not work as a team and there is simply too much going on at once for proper customer service. If you want to provide exceptional internet, fix the system. Offer the same prices over the phone as online. Don't lose customers orders. And if you promise a price, HONOR IT WITHOUT A HASSLE!!
And please, don't usher me into a top secret private portal. Be brave, leave it open for comments. I'm not looking to resolve it here. One website has over 1,000 reviews of Verizon and most of them are negative. I'm obviously not alone and something needs to be done about offering top prices but horrendous customer services.
Have a happy day

I have been helped many times with the private resolution option. If you don't want to use it, don't. I have gotten very quick resolution to my problems by using it. But, if you don't, my problems will be resolved even quicker.
I have been with Verizon for 5 years, Lenore, and what slows up the help process is really all the people who use these forums to vent their anger. We should give them all a special place to go to do this and the rest of us could use these forums for the purpose intended.
So many very knowledgeable people on these forums have helped me and their help is free. I thank my lucky stars for each and every one of them.

My 3g is getting shut down on 40 percent and not turning on until plunged in

my 3g is getting shut down on 40 percent and not turning on until plunged in

Hi S,
Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

Iphone 4 / 4s shuts down frequently from itself

My girl-friend has an iphone 4 and since a few weeks it shuts down frequently spontaneous.
Replaced the battery and totally renewed the IOS. No succes. While doing this, my iphone 4 also shut down spontaneous!
Also replaced the battery and replaced the IOS. No succes. 2 Friends of mine have exactly the same problems with their iphone 4S.
Is there a wifi-virus in Nijmegen, The Netherlands??? Are there more people with this problem??
If shut down, it can be started up again by doing a reset. Our iphones are not reliable anymore.....

After I removed Facebook and FB messenger, my iphone problems vanished. No spontaneous shutdowns anymore.
My girl-friend first removed FB messenger with no succes. After removing Facebook, she also is free of problems.

My iPhone 4s shuts down Frequently

Please Help.........My Iphone 4s shuts down frequently even when the battery is at 70%.....how do i overcome this problem....thx

Hi there naushdxb,
You may find the troubleshooting steps in the article below helpful.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support
-Griff W.

How do I get my lap top to shut down when I close the lid?

I have tried to switch on the function that shuts down my lap top when I close the lid but am either dumb or lazy and gave up too quickly.... any help would be greatly apprecated.

Thanks Poikkeus
My mac goes to sleep when I close the lid pretty quickly but when I open up the lid it opens up again where I left off.
Some nice person burgled me some time ago and stole my mac so I want to force my mac to close right down so when someone else opens up they are forced to open up in guest. I can then track my mac without risking them accessing my personal details etc.

My lap top wont shut down, i have two mail icons showing in dock and one wont quit??

i have two mail icons showing on my docking station one is normal the other has number 6 in red.. problem is i try to remove and quit the icon with the number on it and it wont let me it does nothing.. now i cant seem to shut down the lap top as it keeps saying please quit mail first but it wont quit or cant seem to remove it.. the other mail icon im assuming the correct one is working , but what is this other one doin ther?
anyhelp is greta thanks

i worked it out lmao

Database is getting shutting down automatically

Hi,
Since a month database is getting down at 19:00 hours daily automatically.
and in alert log it shows the followoing error:
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 56
Mon Sep 22 19:00:42 2008
with diff high water mark....and processes are 700 and sessions are defined 750 in init.para file...could you please suggest why is it happening ?
Thanks

user644122 wrote:
Hi,
Since a month database is getting down at 19:00 hours daily automatically.
and in alert log it shows the followoing error:
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 56
Mon Sep 22 19:00:42 2008
with diff high water mark....and processes are 700 and sessions are defined 750 in init.para file...could you please suggest why is it happening ?
ThanksCheck cron job and other scheduled jobs on your database server. The database is shutdown gracefully not by accident or crash. Maybe a old backup script?

Why do my firefox open show my window and tabs from last time , During the surfing with my firefox if computer get shut down , I don't want to recover my we page

Today when I was surfing on net and my computer suddenly got shut down. When I restart my computer and open my firefox it was showing me web -pages which I had been surfing. I don't want access these pages. How can I solve this problem.

Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" - "Show a blank page"

My probook 4420s lap is getting shut down frequently

Similar Messages

Maybe you are looking for