My product code does not work because I had to rebuild my computer
My computer had a virus, so I had to rebuild it and lost all my information. When I tried to reinstall Photoshop Elements 7 and enter in the product code, it wouldn't work because I had previously used the code on my same computer before it was rebuilt.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
In theory if you clean up thoroughly the next update should go smoothly.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Similar Messages
-
hello there,
i bought lightroom 4 today (the student version), installed it and wanted to type in the product code and got kind of confused.. my product code is XXXXXX-XXXX-XXXX-XXXX-XXXX (X=letters,numbers) but what i need to type in is six times four numbers or letters. so my product code that is written down is 2 numbers or letters short. i did try to type in in whatsoever but it did not work. thanks for the helpHello
I just received CS6 with educational license, bought as a bundle, together with my new Macbook, but the product code does not work when I try to register at www.adobe.com/go/edu-apple.
Kind Regards
Allan Tang -
Hello, I purchased design premium 4.0 German Windows (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.
Moving this discussion to the Downloading, Installing, Setting Up forum.
Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession, You can find details regarding the transfer process at Transfer an Adobe product license. -
After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?
lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken! -
I need help with a product keycode. I am trying to install Crystal Reports 11 on our server and its not taking the code.
Thanks.
ChrisI have a similar issue with the Business Objects Edge Series 3.0 trial version.
The key code email I received thanks me for my interest in Business Objects Crystal Decisions, is this the same product?
The code does not work, thanks.
Edit> I have now received a working code from Business Objects, installation now proceeding, many thanks
Edited by: Duncan Farquhar on Jul 23, 2008 2:41 AM -
I purchased design premium 4.0 German Windows from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.
Nobody here can help you with this. You'll need to contact Adobe directly.
Did your friend fill out and send in the license transfer form?
Transfer an Adobe product license -
When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox -
can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?
The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.
-
I am trying to install CS6 from the email I was sent from Adobe. The redemption code does not work. Is there a phone number I could call for support. I bought my Adobe Creative Suite 6 from Ivy Tech Community College in Indianapolis, IN. I have recently moved to Bodfish California and need help to install this.
Thank You
Cathy TalbottHi Sunshine2014,
You can try the options in obtaining serial number from
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
You canalso contact Adobe regarding this, they can assist you better.
Regards,
Rajshree -
my itunes store does not work because i do not have visa card? can you help me and advise please?
See this article for troubleshooting
http://support.apple.com/kb/ts1827 -
I have a license of the PARTY 11, recently expired, to find out what was going on I have PSE 11 uninstalled. Reinstall does not work because the license has expired. Can I purchase the upgrade version of PSE 12 now or should I buy a full program?
Ok thank you, I better can wait then.
Greetings, Evert Annen
Op 8 sep. 2014 19:45 schreef "Peru Bob" <[email protected]>:
I have a license of the PSE 11, recently expired, to find out what
was going on I have PSE 11 uninstalled. Reinstall does not work because the
license has expired. Can I purchase the upgrade version of PSE 12 now or
should I buy a full program? created by Peru Bob
<https://forums.adobe.com/people/Peru+Bob> in Photoshop Elements - View
the full discussion <https://forums.adobe.com/message/6711348#6711348> -
Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21
Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21
-
Data Binding: Simple code does not work.
hi... the following simple code is used to display the ename field for a record selected in scott.emp on the console. the code is placed in an event handler. it is as follows:
DCBindingContainer bindings = ctx.getBindingContainer();
DCControlBinding binding = bindings.findCtrlBinding("ename");
String Name = (binding != null) ? binding.toString() : "";
System.out.println(Name);
is the code above correct????
if so, why it does not work???
thanks for every help in advance & best regards.Hi,
please check the UIModel.xml file for the page if the binding name is "name". The code you have is the same code we published in our QBE workshop and it works there. The only difference is the name of the control binding. So please check if the binding name exists. (e.g. it could be ename1 instead of ename)
Frank -
HT201209 redemption code does not work for mountain lion
app store says code is is not recognized
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
If that does not work, call Adobe Customer Service. -
Hi all,
I'm a newbie of SMP and SCN. I sincerely respect SMP leaders who posted nice blog.
I’d like to know how can I process the request (the number of customers) from client application to SOAP request.
My requirement is to connect SOAP WebService to client with Integration Gateway in SMP3 SP06.
SOAP service is provided by RFC. I checked the following blog and created function module.
http://scn.sap.com/docs/DOC-28582
This function module can input customer code (optional) and the number of entities to output customer information such as customer code, name, address, country, postal code and city.
I have configured SOAP WebServices with Integration Gateway in SMP3 SP06.
http://scn.sap.com/people/marvin.hoffmann/blog/2014/03/15/how-to-connect-soap-webservices-with-integration-gateway-in-smp3
OData looks like this:
Operation is Query and Response Mapping is defined as below:
At that time, I couldn’t see the Service Document of my OData service. So I added custom script to pass the Basic Authorization and input parameter.
http://scn.sap.com/docs/DOC-58551
Basic Authorization is working but the request
parentMap.put(“IM_COUNT”, “5”) [the number of customer from FM]
does not work. I thought I could see 5 customers information in the service document but I could see all the customers information.
In addition, When I click on ”Define Request Mapping”, eclipse says "Request mapping is not available for SOAP Query.”
How do I implement my request successfully?
Thanks,
HanaeHi Midhun,
thank you for your quick response!
I have already used SOAPUI to test my query.
>it's creating an xml file in a specific format where you need to pass values to get the output.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
<soapenv:Header/>
<soapenv:Body>
<urn:ZGetcustomerWebservice>
<!--Optional:-->
<ImCount>5</ImCount>
<!--Optional:-->
<ImKunnr>
<!--Zero or more repetitions:-->
</ImKunnr>
</urn:ZGetcustomerWebservice>
</soapenv:Body>
</soapenv:Envelope>
Is this the xml file you mentioned?
I checked the following blog and tried debugging, but I couldn't see any variables value...
Debugging Custom Script in Integration Gateway
Here is my custom code:
function processRequestData(message) {
message.setHeader("Authorization", "Basic XXXXXXXX=");
importPackage(com.sap.gateway.ip.core.customdev.logging);
importPackage(com.sap.gateway.ip.core.customdev.util);
importPackage(org.apache.olingo.odata2.api.uri);
importPackage(java.util);
importPackage(com.sap.gateway.core.ip.component.commons);
importPackage(com.sap.gateway.ip.core.customdev.api);
parentMap = new LinkedHashMap();
parentMap.put("IM_COUNT", "5");
//Set the message body back
message.setBody(parentMap);
//Logger
importPackage (com.sap.gateway.ip.core.customdev.logging);
log.logErrors(LogMessage.TechnicalError, "This is first log"+message.getBody().toString());
return message;
Authorization is perfectly working but others are not.
It would be great if you could have suggestions.
BR,
Hanae
Maybe you are looking for
-
Not impressed at all with the Mac Pro
I spent years of frustration using a PC and hearing Mac users telling me how they never have issues with their computers. In January, I finally broke down and spent more than $4,000 on a Mac OS X, Version 10.5.2 with the following installed: Processo
-
How can I remove Growl from my Mac Pro
Hi there! How can i remove Growl from my Mac Pro?
-
IChaT ALERT: could not connect...
I keep getting this error message when I try logging on to ichat: Could not connect to AIM The connection to the host was unexpectedly lost. I have checked all of my proxy settings in firewall and have even tried my aim and .mac account. My bonjour c
-
Hi, We have published our server through ITS. Once users logged on they access through Webui. I would like to provide users the option for themselves to change their own password.Please suggest how to achieve this Regards D.Mukundan
-
Resolution priority during SBS2008 to 2011 migration
Hi Everybody We are halfway through migrating from SBS2008 to 2011 There are a number of issues in BPA on the destination server View installation issues on the destination server is reporting THE REQUIRED ACTIVE DIRECTORY STRUCTURE WAS NOT CREATED.