My Product descriptio​n doesn't match (searching by Product number on Lenovo site)

Hi,
I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
But when I go on Lenovo site, and check it by product number, I got different result.
My real HW configuration (only what differs):
HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
(the rest is ok)
This is what I got from Lenovo site, searching by Product number (7466-3GU):
Product: ThinkPad X200s 7466-3GU
Original description: SL9400(1.86GHz), 4GB RAM, 160GB 7200rpm HD, 12.1in 1440x900 LCD, Intel 4500MHD, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, X200 UltraBase+CDRW/DVDRW, Fingerprint reader, Intel Turbo Memory, 9c Li-Ion, WinVista Business 32
When I called on Lenovo support, they told me, it's strange, and that shouldn't happen. I asked them, to check it, if they will get the same result. And they sent me the same product description, as on the Lenovo site. So HDD, battery, and UltraBay differs.
Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
Is this a problem? What should I do now?
Thank you for your suggestions.
Karol
P.S.: I apologise for double post, I posted this question already on http://forum.notebookreview.com, but no reply. Then I realised, this is more appropriate forum for this question.

I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
But when I go on Lenovo site, and check it by product number, I got different result.
My real HW configuration (only what differs):
HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
(the rest is ok)
Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
Welcome to the forum!
Warranty (if there is one) shouldn't be an issue as the HDD and battery are customer replaceable units (CRU) and the UltraBase isn't required.  But...  Did you get cheated by the seller?  Have you checked to see if it is truly a new unit with the full warranty and not a refurb?
Message Edited by JaneL on 05-28-2009 07:53 AM
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

  • You have changed my product key and now microsoft is asking me for activation product key that doesn't match what you have changed. and it clearly stated that you changed my product key... please fix this!

    I'v had my laptop for 9 years. I have been running Mozilla maybe for a year with updates. microsoft Automatic updates are set. Then, yesterday, for no reason at all, Microsoft asks me for my product key activation. Made some research and found out that my microsoft is genuine, however, it has not been activated!!! I found it really strange. When I wanted to put my product key registration, they say it is invalid. So, I made some research by going on the link they offered on the activation screen which brought me to be able to browse the internet. When I made research, I found out through the "test if your product is genuine", there is a product key that is different than what I have. They say I have product key xxxxx-xxxxx-T6DFB-Y934T-YD4YT. it clearly says it is 100 genuine but was not activated! After 9 years? I saw they wrote that my browser states mozilla. am not sure why this is happening. how can my product key change without my authorization? how can I not be able to enter my own computer anymore? why isn't my product activated? can you help me? can't contact microsoft without paying $49/hr or something like that... I don't have a credit card...

    Mozilla has nothing to do with a Microsoft product activation key.
    That "test" page should be viewed in Internet Explorer and not with Firefox, as it may use ActiveX which isn't compatible with any Mozilla product.
    [https://support.mozilla.com/en-US/kb/ActiveX]

  • Why doesn't a search show the number of instances found?

    I'm shocked that Internet Explorer does this but Firefox doesn't -- when I do a search on a page (ctrl-F), why doesn't it show the number of instances found on that page? See IE8 for an example. This should be built-in and not require an add-on, but I'll take it any way I can.

    *Find In Numbers: https://addons.mozilla.org/firefox/addon/6738

  • Search Criteria - Product ID not  working for numeric Internal Goods/Servic

    Hi All,
    I was searching Internal Goods/Services via Product ID. In the search criteria for Product ID we have given 1* as search criteria and it seach all alphanumeris Internal Goods/Services but not able to give search results for numeric Internal Goods/Services.
    Do we need to apply any correction note?
    Best Regards
    Lovkesh

    Hi
    <u>Try the following OSS notes</u>
    <b>Note 707781 - Product search does not find all documents
    Note 871627 - Incorrect formatting of product ID in Shop transaction
    Note 788339 - Performance problems during call of search help for products
    Note 803414 - Shop: Search for an invalid product returns all entries
    Note 1034811 - Search in product ID if altrntive ID does not return results
    Note 1004975 - SRM@ERP: Dump CX_SY_ASSIGN_CAST_UNKNOWN_TYPE in COMMPR01
    Note 483896 Product search - same product ID from several backends
    Note 419581 EBP-SHP: Product search by logical system</b>
    <u><b>Incase nothing works, better to get back to SAP.</b></u>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • Serial number doesn't match product

    My coworker downloaded Adobe Acrobat XI Standard on our computers recently and now whenever I try to open up a PDF file a pop up screen appears with the heading "Serial Number Upgrade" asking me to chose a product and type in the serial number I have tried matching every single product option with my serial number and none of them work. The screen does say my serial number is correct but it doesn't match any of the products. I'm not sure what to do at this point...?

    Ok, so what you are saying is we bought the upgraded Adobe Acrobat, but we would need to buy the previous version if we want the serial number to work?
    King & Wood, P.A.
    1701 Hermitage Blvd., Ste. 104
    (850) 580-7711
    (850) 205-4501 fax
    Privileged & Confidential: This email is intended for the named recipient(s) only and may contain information that is proprietary, privileged, confidential, or otherwise legally exempt from disclosure. If you are not the named addressee, you are not authorized to read, print, retain, copy, or disseminate this message or any part of it. Nothing in this email is intended to constitute a waiver of any privilege or the confidentiality of this message. If you have received this email in error, please notify the sender immediately and delete this message. Circular 230 Disclosure:To ensure compliance with Treasury Department regulations, we advise you that, unless expressly indicated, any federal tax advice contained in this message or any attachments cannot be used for the purpose of avoiding penalties imposed by the Internal Revenue Code, or (ii) promoting, marketing, or recommending to another party any matters addressed herein

  • Get playcount and ratings from ipod when pc library doesn't match ipod

    After updating iTunes, the library on my PC was erased.
    So I imported an exportfile 15 months old to the new library and added all songs in my "recently added" (of past 15 mths) on my iPod.
    So far so good.
    The problem is that this new library doesn't match the one on my iPod, though they are the same. The only difference: all ratings and stats that are on my iPod but aren't on my PC.
    Is there any way to get the "library identifier" on my PC and iPod to match again, so my stats and ratings are updated to my PC?
    Cheers,

    Which model of iPod do you have? I have a 160GB Classic (this forum) which _does not_ show Podcasts under the Music folder, and apparently does not have an option to do so. However, I also have a 5th generation 30GB video iPod, which does show Podcasts under the Music folder. Straight away, you'll notice that different modles behave differently, so we need to know.
    So, that's the first thing to sort out.
    Then, on your manual recordings, did you add all the relevant artist information to the file (i.e. the MP3 tags) when you created them? If not, that will be why they only show up in songs, (but there may be another cause too!). You can fill in any missing information by highlighting the song and clicking on *File/Get Info* and adding the info then.
    In the long term, the probably answer to your manual files is to give them their own genre and then search for them that way.

  • SDK 3.0 error: profile doesn't match Application Identifier

    I'm testing my app w/ iPhone SDK 3.0 beta 5 on Xcode 3.1.3.
    Development provisioning profile under "Project-> Info -> Code Signing Identity" is grayed out & shows the error(including quote at the end):
    profile doesn't match Application Identifier "
    any ideas? The same profile has no such issue w/ SDK 2.2.1 on Xcode 3.1.
    My Bundle Identifier is of the below format :
    com.<mycompanyname>.{PRODUCT_NAME:identifier}
    I specified the "Product name" under both "Project -> Info" & "Target -> Info".. that didn't help either.
    I also noticed that there is no such problem under "Target -> Info -> Code Signing Identity"
    I'm testing to ensure compatibility of my 2.2.1 app with 3.0. I appreciate any help with this issue.. It has been a frustrating couple of days trying to resolve just this one issue which is preventing me from codesigning onto my iphone

    I was able to deploy to my iphone by following the instructions here
    http://www.loonsoft.com/posts/21
    Note: it is {} and not () ${SDKROOT}/ResourceRules.plist
    I was getting the below error during codesign & I thought that the above "graying out" of the dev provisioning profile in the "Code Signing Identity" was causing it.
    "object file format invalid or unsuitable"
    Turns out it does not prevent me from deploying to my iphone after I fixed the SDKROOT. I still have the dev provisioning profile grayed out and would be interested to know how to solve this problem "cleanly" even though it doesn't seem to have any immediate downside.. fingers crossed for distribution signing.

  • ORA-00314: log 1 of thread 1, expected sequence# 416 doesn't match 413

    Hi,
    SQL> startup
    ORACLE instance started.
    Total System Global Area 289406976 bytes
    Fixed Size 1248576 bytes
    Variable Size 117441216 bytes
    Database Buffers 163577856 bytes
    Redo Buffers 7139328 bytes
    Database mounted.
    ORA-00314: log 1 of thread 1, expected sequence# 416 doesn't match 413
    ORA-00312: online log 1 thread 1:
    'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG'.
    Help me how to solve it.
    thankx

    The Result of Your Suggested Commands is
    SQL> select f.group#, f.member, l.status, l.bytes/1048576 sz
    2 from v$logfile f, v$log l
    3 where f.group#=l.group#
    4 order by f.group#, f.member;
    GROUP#
    MEMBER
    STATUS SZ
    1
    D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
    CURRENT 50
    2
    D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
    INACTIVE 50
    GROUP#
    MEMBER
    STATUS SZ
    3
    D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
    INACTIVE 50
    SQL>

  • The license state for the current server doesn't match the farm's license state

    I am trying to build a development Server, to mirror our Production Server. 
    I have copied the Config_Database and WSS_Content from our Production Server to a Development Server that is on a separate network. I installed SharePoint 2010 and ran the Config Wizard, entered in the database server and chose the Config_database that I
    copied over previously.
    But I receive the error:
    "The license state for the current server doesn't match the farm's license state"
    Can anyone help me with this.
    dfrancis

    Hi,
    Please have a look at links below:
    https://sharelockpoint.wordpress.com/2014/01/09/sharepoint-2013-installation-error-the-current-server-cannot-be-joined-to-this-farm/
    http://blogs.msdn.com/b/sowmyancs/archive/2012/08/08/the-license-state-for-the-current-server-doesn-t-match-the-farm-s-license-state-sharepoint-psconfig-error.aspx
    Hope it helps!
    Thanks,
    Avni Bhatt
    If this helped you resolve your issue, please mark it Answered

  • Crystal Report doesn't run on the production PC

    I developed a report using VS 2005/Crystal Report. The report has three on-demand sub reports and some subreports. It runs well on my PC, but doesn't run on the production PC, on that PC, I only can see the report header or few columns. The difference (I can tell) between my PC and the production PC is my PC has VS 2005 installed.
    Is there anything I can do to make the report running on the production PC?
    Thanks.

    Hi Jhon,
    Have you installed the runtimes of CR of VS2005 on your server, if not than please install from(only applicable if you are using the bundle version of CR i.e. CR 10.2 which comes with VS 2005) [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#07].
    Note- use the appropriate version of merge modules for 64 or 32 bit machine
    hope this works
    Regards,
    Amit

  • Closing Stock Valuation doesn't matched physicallly

    Hi SAP Gurus.,
        Can you please assist me reg this issue"Closing Stock Valuation doesn't matched physicallly".
    May I know the possible rectification ways to solve this problem.
    Thanks in Advance,
    Regards,
    Balaji Bhonsle

    Physical Inventory...
    http://www.sap-img.com/materials/physical-inventory-process.htm

  • Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

    I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
    They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
    I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
    plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

    You are correct. The SIM Tray of iPhone 5 does not have the Serial #  printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

  • Itunes will no longer accept any of my credit cards.  Says security code doesn't match with any card I use.  I have inputted new card info in the apple store area and it still says the same thing in itunes.  Customer service is no help at all.

    Itunes will no longer accept any of my credit cards.  It says vcode doesn't match when it does.  Customer service is no help.  I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

    Itunes will no longer accept any of my credit cards.  It says vcode doesn't match when it does.  Customer service is no help.  I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

  • I use an iPhone since several years and it was recognized as a camera by my PC. I have recently switch my PC of an iMac and now my I phone is no longer recognized. Very strange concerning two apple products wich ara supposed to match perfectly together.

    I use an iPhone since several years and it was recognized as a camera by my PC with no problem. I have recently switch my PC for an iMac and now my I phone is no longer recognized. Very strange concerning two apple products wich are supposed to match perfectly together. Can anyone help?

    Did you try the suggestions in this article? iPhone not recognized in iTunes for Mac OS X

  • Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

    I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
    After some effort, I was able to get the Android devices to connect via VPN.  However, my syslog server has a number of errors recorded that look this this:
    %ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y.  The decapsulated inner packet doesn't match the negotiated policy in the SA.  The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp.  The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
    Digging further, it seems this error might be due to a NAT issues with the VPN connections.  VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working.  However, I made no changes in the config, except for those related to additions needed to support L2TP.  With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses.  I'm at a loss.
    The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
    I noted in the config this line:
    access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
    The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
    nat (inside) 0 access-list inside_nat0_outbound
    I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be.  I'm hoping somebody might be able to point out my error.
    Here's the config file (at least the parts that might be of interest):
    : Saved
    ASA Version 8.4(3)
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address dhcp setroute
    boot system disk0:/asa843-k8.bin
    object network obj-192.168.3.0
    subnet 192.168.3.0 255.255.255.0
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    access-list outside_access_in extended permit icmp any interface outside time-exceeded
    access-list outside_access_in extended permit icmp any interface outside echo-reply
    access-list outside_access_in extended permit icmp any interface outside unreachable
    access-list outside_mpc extended permit ip any interface outside
    access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
    access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
    access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
    ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
    ip verify reverse-path interface outside
    nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
    object network obj-192.168.3.0
    nat (outside,outside) dynamic interface
    object network obj_any
    nat (inside,outside) dynamic interface
    access-group outside_access_in in interface outside
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ikev1 enable outside
    crypto ikev1 policy 5
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 10
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    group-policy testVPN internal
    group-policy testVPN attributes
    wins-server value 192.168.1.8
    dns-server value 192.168.1.8 192.168.1.4
    vpn-idle-timeout none
    vpn-tunnel-protocol ikev1
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value testVPN_splitTunnelAcl
    default-domain value test.us
    group-policy testVPNnsl2tp internal
    group-policy testVPNnsl2tp attributes
    wins-server value 192.168.1.8
    dns-server value 192.168.1.8 192.168.1.4
    vpn-idle-timeout none
    vpn-tunnel-protocol l2tp-ipsec
    group-policy testVPNns internal
    group-policy testVPNns attributes
    wins-server value 192.168.1.8
    dns-server value 192.168.1.8 192.168.1.4
    vpn-idle-timeout none
    vpn-tunnel-protocol ikev1
    username testuser password PASSWORD encrypted privilege 15
    username testuser2 password PASSWORD nt-encrypted privilege 15
    tunnel-group DefaultRAGroup general-attributes
    address-pool VPN-Pool-1
    default-group-policy testVPNnsl2tp
    tunnel-group DefaultRAGroup ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group DefaultRAGroup ppp-attributes
    authentication ms-chap-v2
    tunnel-group testVPN type remote-access
    tunnel-group testVPN general-attributes
    address-pool VPN-Pool-1
    default-group-policy testVPN
    tunnel-group testVPN ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group testVPNns type remote-access
    tunnel-group testVPNns general-attributes
    address-pool VPN-Pool-1
    default-group-policy testVPNns
    tunnel-group testVPNns ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group testVPNnsl2tp type remote-access
    tunnel-group testVPNnsl2tp general-attributes
    address-pool VPN-Pool-1
    default-group-policy testVPNnsl2tp
    tunnel-group testVPNnsl2tp ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group testVPNnsl2tp ppp-attributes
    authentication ms-chap-v2
    One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup".  Is that actually a limitation, or did I make an error that forced that requirement?  I wanted to use "tunnel-group testVPNnsl2tp".
    Thanks!

    Chris,
    This is still a bit off the mark.  I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them).  Let's just remove that stuff from consideration.  I actually tested the current configs just to see if they are working since the upgrade.  testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access.  I guess there is a NAT config issue there, too, but not sure what it is, yet.  I've not investigated that closely.
    I want to solve one problem at a time, though I understand there are some interdependencies.
    What I'd like to focus on right now is just the L2TP VPN connection.
    From what I've been able to understand from the documentation, what I need are these lines:
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ikev1 enable outside
    group-policy testVPNnsl2tp internal
    group-policy testVPNnsl2tp attributes
    wins-server value 192.168.1.8
    dns-server value 192.168.1.8 192.168.1.4
    vpn-idle-timeout none
    vpn-tunnel-protocol l2tp-ipsec
    tunnel-group DefaultRAGroup general-attributes
    address-pool VPN-Pool-1
    default-group-policy testVPNnsl2tp
    tunnel-group DefaultRAGroup ipsec-attributes
    ikev1 pre-shared-key P74bmqL6rT40bl5
    tunnel-group DefaultRAGroup ppp-attributes
    authentication ms-chap-v2
    crypto ikev1 policy 5
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
    The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets.  I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport").  I also don't think I want "pfs group5".  The above config "works" in that I get connected -- all negotiation is done.  It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
    Paul

Maybe you are looking for

  • "Save as" dialog box doesn't come up, even though I have "Always ask me where to save files" selected (email attachments)

    Recently, the "save as" dialog box quit appearing when I attempt to download email attachments. I have the "always ask me where to save files" box checked in the tools/options/general/downloads area. The box still appears when I use Chrome, but not w

  • Immediate Requirement of Discoverer 4i

    We have an immediate requirement for Oracle ERP Expertise: Prior experience in developing Discoverer workbooks using Discoverer 4i based on Oracle's Enterprise Data Warehouse 3.1 in the area of Supply Chain Intelligence. expert in Supply Chain Intell

  • Use my old iPhone as a pod?

    My old iPhone 3g had a faulty headphone jack, so O2 kindly sent me a replacement 3gS. Great! so what do i do with my old faulty iPhone? not a lot it seems, but i thought i cold at least make use of it as a games machine - i.e. i'll put lots of apps a

  • Programs not running in leopard

    my adobe creative suite and office:mac v.X are not running after installation of leopard, which i bought to use with my 16gb iphone. suggestions?

  • How to import config from 4404 WLC to WLC 5508

    Hi all In one week I need to import the config from my 4404 WLC to my new 5508, then I just want to change the mgnt IP address of the 5508 and then bring it into the same mobility group. How do I import the config when the 5508 is straight out of the