My project file in not where I thought it was. How can I find it?

I have been searching through my old Premier Pro 5.5 projects and archiving several to a different drive to make room on my projects drive. I closed down Premier Pro and then re opened later to continue editing a current job, but my project was missing from the opening Premier pro splash window of recent projects. Only the old ones that I had been looking through to archive. No problem I thought and navigated to the folder where I thought it was but it's not there and I have not being able to find it by searching find file, would it be in a default PP folder somewhere? Thanks Howie

Thanks Arjun,
That’s what I thought as well, but when I checked it was not there, so I decided to go through every project folder in my hard drive and check the contents and sure enough I found it in another project folder. I was in a bit of a panic as the commercial I was working on is on air on Monday. Do you know if I move it back into its proper project folder will Premier Pro be able to find it, or should I just leave it where it is and not worry about it.
Thanks for your reply
Regards
H

Similar Messages

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

My call waiting button is not where it should be. How do I find it?

I hear my phonebeep when another call is coming in while I am om the phone. The call waiting buttonis not there to swap calls. Under Settings -Phone, there is not a button under the Reply with Message button that would allow me to change my call waiting options. What can I do to fix this?

It may be a hardware failure, but see this: iOS: Wi-Fi settings grayed out or dim - Apple Support

I upgraded to 5.0, which is not supported by DTCC.edu, how do I change back to 4.0. Also I can not log into DTCC at all, how can I find out if the site is down?

'I am running Firefox 5.0, not supported by DTCC, or the Math Lab program we use at DTCC.

Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved'''.

TS4006 i just bought a ipad. it is been charge on the table (in a hair salon). i am busy with the customer, when i came back, the ipad has been stolen. I did not set up the ipad yet. how can i find the ipad with the icloud. i need some help, please.

Welcome to the Apple Community.
Unfortunately you can only enable Find my Phone while you have the device, I'm afraid there isn't anything you can do now.

Your project file is not readable!!!

Okay. I'm about ready to have a nervous breakdown. I'm new to imovie, so I'm hoping there's someone who can help . . .
Basically, after working hours and hours on a project, (w/ my editing getting more and more complicated) out of nowhere it gives me a 'your project file is not readable.' I diligently save every couple of minutes, empty the trash, etc., but it still happens.
I thought it was my little ibook at home being the culprit, but after bringing it into work on a G5, dual processor it happened again!
Any help would be so appreciated. Thank you.

Welcome to the iMovie Discussion.
That's a known problem. It can happen after emptying the iMovie trash in versions 2 through 4. There are other contributing factors too. It doesn't happen often, but it happens.
Go to the following forum page, then use your Web browser to find this text: "I'm receiving many requests". My message starting with that text describes how to send me information needed to (hopefully) rescue the project.
Here's where to start:
http://discussions.apple.com/thread.jspa?threadID=194634&start=100&tstart=0
Karl

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.

Have you checked the sorting settings to make sure they are as you expect?
OT

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

The project file could not be loaded

a new windows 8.1, VS2013 install ... I use skydrive to sync all my source files to a folder named c:\skydrive. When I try to open a .SIN file from the c:\skydrive folder I get an error in visual studio:
C:\Skydrive\c#\AutoCoder\AutoCoder.csproj : error : The project file could not be loaded. The file cannot be accessed by the system.
C:\Skydrive\c#\AutoCoder\AutoCoder.csproj
When I right click the .csproj file in windows explorer I do not see a security tab. Not sure if my user is authorized to the file or not.
How to open a project in VS2013 from my skydrive folder?
thanks,

Hi Steve,
Generally we could open the project from the skydrive folder, I often use it. As you said that it doesn’t work in your VS, I doubt that it would be related to this project.
Please delete the .suo file in your project folder, and then reopen the project file again (.csproje) again.
If possible, you could run your VS as the admin, and then open this project.
If still no help, maybe you could create a new project for it.
http://stackoverflow.com/questions/11171322/how-can-i-recover-a-corrupt-csproj-file-in-visual-studio-2010
Or you would contact the developer who created this project.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help. I can't open any of my project files,"Project file version not recognized". Whats going on?

After uninstalling and reinstalling Prelude CC none of my project files will open.
I get the notice "This version of the project file is not recognized!"
I have no idea how to troubleshoot this. Any help would be greatly appreciated.

So after 3 hours of painful chat, Adobe Finally gave me the solution. They wouldn't answer my question without trying a bunch of things that I had said I already did, so hopefully this helps some people.
Somehow, updating was disabled, or suppressed, my the administrator (that's me). Adobe kind of forgot to give the administrator a way to then reenable that for users. You'd think that would be something the administrator would control from the admin console online, but no. You set it up once on install, then everyone is just stuck with whatever version they installed at the time. But good news! There's a file that suppresses that. You Might be able to simply delete it. I'm not sure.
But if you need to fix it, here it is. All 2 minutes that it will take you. Do NOT contact Adobe. Their help system is incredibly inefficient (but then again, aren't most?):
go here: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
see an adobeUpdateradminprefs.dat file? Open that in notepad (or notepad++ or equivelant if you like that better)
Change the 1 to a zero and save.
That's all. That Should have been a known item, and would take all of 10 seconds to check, but I had to uninstall and reinstall several things before we went to a folder. Because uninstalling reinstalling is easier? ha
Now in response to Ramesh:
1. the issue is moot because previous versions of prelude can not open future versions. That's all over the web. So just make sure you have the current version.
2. we are now both at the current version.
3. offline media? we hadn't figured that out. If she closes the file and opens it again it seems to go away. So that's an unknown. And it's working now, so I don't really care.

The project file is not bound to source control, but the solution contains source control binding information for it.

This may be more of a SQL Server Management Studio question, but I couldn't find a SSMS forum...
I've got a database solution that contains several projects. They're just to keep track of changes to stored procedures, triggers, views, etc in a few databases I maintain. There is a problem with two of the projects though. No matter what I do, I can't seem to get them bound to source control right. When I open the solution, I get:
The project file is not bound to source control, but the solution contains source control binding information for it.
With two options, use solution binding and remove solution binding. If I keep the solution binding, everything works fine. But it's really annoying to have to deal with every time I open the solution. If I remove the solution binding, the projects are now unbound again. If I try to fix them (using the change source control or Add Selected Projects to Source Control options under the File->source control menu), I just end up in the same situation. I've even tried deleting the projects and re-creating them from scratch, then re-adding them to VSS. If I open the solution files in a text editor I can see the SCC tags in every project, but these two. Since I can't manually add the tags, and Management Studio itself only seems to want to bind them the wrong way, I'm getting really frustrated.
Can anyone point me toward a way to bind these so they work like the rest?

However, that does not appear to be the ONLY cause of the problem. I am a single user and only using TFS2010 and SSMS2008R2. My issue is that I wanted a solution file for each project so that they could managed independently, and a super-solution
file that contained all projects, so that I could perform system-wide searches and cross-checks.
I solved the problem by:
1. Choosing the option to use solution binding, then
2. Adding another project to the solution. This forced the re-write of the solution file.
3. Adding another script to the project. This forced the re-write of the project file.
4. Checking in all changes.
5. Deleting the new script and the extra project,
6 Checking in all changes.
This appears to have solved the problem.

I can't share my Final Cut X project : the process does not start. it seems that the project files is not found by the application. why ?

I crate a project on Final Cut pro X. A 52 mn movie, that works really good on the time line. But I can't export it on DVD or IPad or other devices. The process is engaed but without effective effect. After one hour no result. It seems that the "project" files is not physically recognise by Final Cut export routine. Is anybody had such a bad surprise ?

Tell everyone what type of video (format) you shot in the camera, what are your project settings and exactly what settings are you choosing when you use Share.

"your project file is not readable"HELP

"your project file is not readable" is the message I am getting in imovie4.0.1 ... I have just spent 10 hours editing this thing tonight... and numerous hours the last week. I decided to take a break half hour ago and give me and the mac a breather... so I turn the computer back on and go to open my project and get that message. What more can I say... I save alot while I am editing... every 20 min at the most. I am gonna loose it if I lose it... I have over 580 clips in this thing... the tunes were falling into place real nice toooo,,, what can i do???
This is a skateboard video ,,, thats why so many clips... other projects still open...ah man... I bought this computer just for this project... I can not afford for this to happen to me... I am shaking .,.. my nerves... help please.

After losing a whole project in an earlier version of iMovie (when there was no .mov file in the project folder), I started doing several things to prevent another nightmare. ;o)
First, I never empty the trash. I save the project frequently--especially after an edit that was difficult. I quit iMovie and duplicate the project file AND the .mov file several times per iMovie. (File>Duplicate) I type a time code after the name of the duplicates, so it's easy to find the latest one. And periodically I reboot...this may be like knocking on wood.
IF you have these backups AND you get a corrupted project file, you can open a new iMovie project, import the clips, and replace the NEW project file and .mov with the backups. The backups must have the exact name as the new files being replaced.
I've only had to use this one time, but it worked great. I lost some editing, but it was not a big deal compared to losing a whole project.
I THINK this would work even if you lost all your clips, provided you imported the original footage from the same starting points and in the same order as in the original project. If wouldn't be easy with 160 clips, but most of my iMovies are of events captured on one or two miniDV tapes and possibly a couple of Keynote presentations, which I prefer for some of the intros and titling.
Karl, if you come up with a program to repair a corrupted file, you will be a Superhero!
iMama

Cant uninstall itunes to reinstall as itunes.msi file is not where computer thinks it should be.

Had a problem on the PC which has effected itunes which no longer opens (some source files not available). Tried to reload itunes to repair and cant uninstall itunes to reinstall as itunes.msi file is not where computer thinks it should be to uninstall.

With suggestion from the forum i have used the MS cleanup utility and remove entries for itunes, itunes will still not uninstall. I cannot delete folders in program files either (dll files wont delete). So at the moment i am completely stuck. I cant uninstall itunes on my PC, i cant reinstall itunes from the Apple website because it thinks i already have the latest version loaded. can anyone help me get passed this sticky and akward situation.
Itunes fan with no music.

Since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks

since upgrading to Lion, i am unable to take screen shots. i get the message that i don't have permission to save files to the place where SSs are saved. how can i regain the ability to save screen shots? thanks

First of all, are you using the OS native screen capture?
If not, make sure the application you're using has been update for Lion. I was using Snapz Pro for years, but I need to update it for use with Lion. Meanwhile Grab and the keyboard shortcuts are working on my Lion load.
If you are using the native capture mode unsuccessfully, I would run the Disk Utility and repair permissions on the drive. For some reason, even in past OS Versions, routine maintenance of permissions makes life a lot easier.

My project file in not where I thought it was. How can I find it?

Similar Messages

Maybe you are looking for