My purchaced songs didnt get added to my nano

i recently restored my laptop i saved all my music to my flash drive and now all the music i purchaced did not go back on to my nano after i added all the other music back on

OK first question, did you re-authorize the laptop to play your purchased songs and do they play in iTunes? If you double click a song and it tells you your computer is not authorized, then all you have to do is authorize it and then those songs should sync back to the iPod.
Good luck,
Patrick

Similar Messages

If i buy an album off of iTunes, and more songs are later added to the album, will I get the songs free?

Im new to iTunes and I thought I saw some ALbums with a couple of songs. If i buy an incomplete album, and songs are later added to it will i get the songs free/

This happened to me last week- my solution- I went back to the store and 'repurchased' the songs- iTunes alerted me that I had already purchased the songs and asked if I wanted to redownload the song at no charge. I said yes and once the new download was complete- I deleted the songs that only played halfway so I wouldn't have a duplicate that didn't work.

I recently gifted a song to my sister, and just found out she didnt get it because she changed her email. how do i resend the gift?

irecently gifter a song to my sister and just found out she didnt get it because she changed her email provider. how do i resend the gift?

If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support

Songs Don't Get Added Correctly To My Nano From My iTunes Playlists.

Some of the songs from my iTunes playlist don't get imported onto my Nano for some reason. I tried over and over--first deleting the playlist, then adding the playlist again to my Nano, but the same songs still don't get added correctly. They show up on the Nano's playlist, but when I try to play the song, it skips them!

The gray dot means the songs didn't get synced...
What's the provenance of the songs?
What's the format/encoding/bitrate?
If you can’t load a song or other item onto iPod shuffle
The song might have been encoded in a format that iPod shuffle doesn’t support. The following audio file formats are supported by iPod shuffle. These include formats for audiobooks and podcasts:
AAC (M4A, M4B, M4P) (up to 320 kbps)
MP3 (up to 320 kbps)
MP3 Variable Bit Rate (VBR)
WAV
AA (audible.com spoken word, formats 2, 3, and 4)
AIFF

I hav an iphone 2; previously i synced it with itunes and it was perfectly working bt now the syncing gets automatically stuck in between and it doesnt copies any music frm my pc; it shows tht ur such a song was nt added as d device timed out; wat to do

i have an iphonbe 2; previously i synced it with my pc to add music and it wrked efficiently; bt nowadays wenever i connect my phone to my pc it starts syncing and it automatically gets stuck in between and m now unable to add any songs or videos to it and still 3 gb space os free in my fone; after sometime it automatically shows tht songs were nt added as the device timed out; wat to do

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT3951 I downloaded the album..gap greatest hits,,but when i played the download.the song party train palyed about a minute and then it went blank.i paid for the whole album,but i didnt get all the songs..how can i resolve this problem.thank you.

I downloaded the album the gap band greatest hits,but one song didnt play all the way through.the song was party train..i paid for the whole album,but didnt get what i paid for..how can i resolve this problem??

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How do I redeem my songs i didnt get from iTunes?

I had to restore my Ipod and when i did all my songs were gone and i didnt get the songs from I tunes so now i dont know what to do. Please Help me!

You have to get the non-iTunes purchases from where you originally obtained them.

HT1725 I bought an album and some of the songs didnt download all the way and then said i need to repurchase it how do i get the songs with out repurchasing it??

I bought an album and some songs didnt download and there wanting me to re but then help me?

Downloading past purchases from the App Store ... - Support - Apple

Not all songs are getting synced into my iPhone

Why is this? I have no clue. Only ~200 of my ~500 songs are getting uploaded.
Also, what's the best way to store songs in my computer, such that it will not get duplicated on my iTunes and/or iPhone?
Currently, I store the song as "Led Zeppelin - Stairway to Heaven" on my computer.

Are you manually managing music and videos, or syncing?
If syncing, do you have all songs and playlists or selected playlists selected under the Music tab for your iPhone sync preferences?
Under the Summary tab for your iPhone sync preferences, do you have Sync only checked songs and videos selected?
If so, are all songs selected or checked in your iTunes music library?
Also, what's the best way to store songs in my computer, such that it will not get duplicated on my iTunes and/or iPhone?
When importing songs from another source besides the iTunes Store or when imported from a music CD, there is an iTunes option to copy files to iTunes Music Folder when adding to library, which is available at iTunes preferences under the Advanced tab below General.

How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?

I have iTunes 12.0.1 on my Windows PC. I'm about to get a new iMac (hooray!) and I'm beginning the process of transferring everything on my PC to my Mac. I've got all the documents, pictures, files, etc. covered, but now I have to make a copy of all of my music.
Most of the music in my iTunes library is not bought through the iTunes Store (I download most of my songs from the Internet). Then, after saving the downloaded song to my computer, I go into iTunes on my computer and add the song. I also add metadata like artist, album, genre, album artwork, etc. to the song in iTunes. What concerns me is that only the songs in iTunes have this metadata: the original downloaded files I saved onto my computer don't have any metadata.
I really don't want to have to go through the long and tedious process of adding artist/album names, genre, etc. to every single song in my iTunes library on my new iMac. How can I copy songs with metadata (added in iTunes) from my PC to my new iMac?
Thank you so much for any help!

Hello! I'd like to learn more about Home Sharing. To do this, would both my PC (which I hope to get rid of) and my new iMac need to be plugged in?
Also, after Home Sharing with the old PC is initiated, I understand that all my songs would appear on my iMac. Is there a way to copy all of these (with album artwork, name, artist, etc.) directly to the iMac's hard drive and then disconnect home sharing so I can get rid of my PC?
Thank you!

Same error message getting added multiple times on clicking of row.

I have an application table where I can add an employee. At EO level, I have kept the unique key validator so that user cannot add the same employee again in the table.
So, now if user try to add the same employee which is already added in the table, then when I click on some other row (i.e on row change), an error message comes (which we have set at the EO level).
Now if you keep on clicking this row, the same error messages will keep on adding in the error box which is displayed. So, its like if you click the same row 5 times, the same error message will be shown 5 times in the error dialog box.
But the moment you click on some other row, it works fine i.e it shows you the error message only once which is what I want. So, is there any way to solve this issue?

my jdev version is 11.1.1.6.0
And sorry but I didnt get your 2nd question regarding af:message tag! The message is coming from some bundle and we have set the message at EO level.

Is it possible that a certain membership didnt get renewed after buying it from a location? for inst

is it possible that a certain membership didnt get renewed after buying it from a location? for instance if my code isn't being redeemed is it possible that my code wasn't activated by mistake?

i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

VALUES NOT GETTING ADDED IN JAVA DICTIONARY

HIII ,
AM DOING AN APPLICATION IN WHICH I AM TRYING TO INSERT VALUES IN A TABLE(CREATED THRU JAVA DICTIONARY), USING EJBS(ENTITY BEAN AND SESSION BEAN) AND COMMAND BEAN..AND WEBDYNPRO....
    AFTER DEPLOYMENT EVRYTHNG IS RUNNING FINE BUT VALUES NOT GETTING ADDED IN THE TABLE...
THE CODE FOR THE "ADD" BUTTON IS :
wdContext.currentEmp_cmdElement().modelObject().add(wdContext.currentEmp_cmdElement().getEmpno(),wdContext.currentEmp_cmdElement().getEmpname());
THE CODE FOR ADD function IN COMMANDBEAN IS
public void add(String empno,String empname){
          try {
                 local.createdata(empno,empname);
               } catch (Exception e) {
                    e.printStackTrace();}
PLZZ DO HELP OUT!!!

The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..

Row getting added in the end of the scroll

Hi -
I am using a scroll area on a page on level 1. The issue iam encountering is that when ever i click the plus sign to add a second or third row (assume one record already exists in scroll 1) , the row gets added in the end of the scroll and also the fields are blank. However as delievered the new row should get added on the top of the scroll meaning 1 of 2 not 2 of 2, and also it should carry forward the values from the prior row. Please any suggestion or help is greatly appreciated.

I figured it out. The reason it was happening was because, my scroll record had another key field after EFFDT and EFFSEQ, due to which the delivered copy forward logic for new rows in scroll did not work and the row was getting added in the end or after the first blank row always.

Data getting added in DSO

Hi ,
I am having DSO in which data is coming from cube .In transformation ( Cube --> DSO ) Rule Type EQ "Direct Assignment & Aggregation EQ 'Overwite' & there is no Start & End routine present .
Cube Data
Planning Area Plant   Country Customer Group Chiild Material Parent Material   Quantity
xxx                    yy        z                ABC              100                     10                    250
xxx                    yy        z                ABC              100                     20                    150
xxx                    yy        z                ABC              100                     30                     50
DSO Data ( Planning Area, Plant , Country, Customer Group, Chiild Material are Key Field & Quanity is data field )
Planning Area Plant   Country Customer Group Chiild Material   Quantity
xxx                    yy        z                ABC              100                  450
Ideally when data flowing from cube to dso ,dso data should get overwrite if key field are same but in mine case quanity is getting added .I don't know please guide me .

Hi ,
      If you need different records in DSO as per your example (without adding the parent material) ,then load two different plant values in the InfoCube and see the result. For example , load Plant '100' and Plant '200' into your InfoCube first and then load these two records into your ODS. The records will not get aggregated and you will find two records in your ODS .But if you want only the last record,then you may need to write routine in your update rules.
Hope it clarifies your doubt.
Thanks.

My purchaced songs didnt get added to my nano

Similar Messages

Maybe you are looking for