My Qosmio shutdowns automatically after a while

Hello.
My computer already have been in the support center.
Since it returns I have a huge problem.
When I'm playing games it shutdowns automatically after a while.
After a few times I found why. The temperature of the gpu goes over 90degrees.
*First- I remeber in the past to hear more noise from the gpu fan, even if it is still working...
Is there any way to change or increase the speed of that fan?
Regards
Diogo Fonseca

This is a common issue with this model, apparently the thermal grease used from the factory had issues that were not disclosed to the support sites, but after 18 months to 2 years my unit was doing exactly this,
i tried speed fan (and other apps) but at best it monitored the temps for convenient viewing,
I finally bit the bullet and bought some arctic white thermal compound ( around $7-12 a jar) dismantled the beast, carefully cleaned and applied the new grease (thin and even) and it hasn't missed a beat in 2 1/2 years.
The x series cooling vents are set one in front of the other and consequentially become easily clogged so make sure to regularly clean them before dust compounds and dismantling to clean is required.

Similar Messages

Macbook pro 13 inch shutdown automatically after upgrade to Yosemite

My MacBook Pro 13 inch 2011 model... shutdown automatically any time during i'm using Mac. after startup one error show up
" Your computer shutdown because of Problem " What's the problem ?
Some times battery not waking up my Mac... means not able to power on the Mac... I must need to remove back panel and Unplugged the battery cable attached with board... after reinsert that cable... Mac working...
Safari freezing.
not able to input even track pad not work... during freezing... then i must need to sleep or restart the Mac.
Solve the problem... everything occurred after Upgradation of OS X Yosemite.

Contact OWC.
http://eshop.macsales.com/Service/contact/
You can also contact Crucial.
www.crucial.com

Tomcat 5 Shutdown Automatically after executing

hi experts,
i have the major problem. after i execute my servlet which submits data to a registry using SOAPSender, the tomcat shutdowns automatically. but the data is submitted to the registry.
im using tomcat 5. hope some1 can help me..
a million of thanks in advance.

I'm sorry, I thought "modprobe capability" was some strange English sentence , but it is just a command.
Thanks for your answer. I'll try this tomorrow...

WRT160N - Web Interface Shutdown Automatically

Hi guys,
I have a WRT160N modem. Its web interface, which is on 192.168.1.1, shutdown automatically after while. So, I cannot access to 192.168.1.1 after 3 or 4 hours of restarting my modem.
Also, there is another ocmputer in my home which disconnect automatically every 10 min. It is a new vaio laptop with a full update win vsita (I don't know about its ethernet card).
BTW, the firmware version of my rouret is: 1.53.0

You could try updating the firmware of your router.

How to startup/shutdown automatic?

Hi, is it possible to have bootcamped windows 7, to startup and shutdown automatic after schedule?

It's possible but would require scheduling on both operating systems. You can write the boot drive to NVRAM and issue a reboot. That would start windows, what happens there would be controlled by windows. Inside windows you can automate using the control panel to select the mac boot drive and again, issue a reboot.
I think it would be more robust to have a small winbox running 24/7 than try to cobble together something that complicated on a single mac. There must be a reason behind your request. What is the reason, maybe there's another way to achieve the goal.

MSI GE60 0ND Shutdown automatically

My laptop shutdown automatically after i playing a game named the witcher 2(after the firstcutscene it will lag and then my laptopscreen goes black).

yeah, i think the problem is the fan it doesnt move when the gpu is overheated.(i got huge fps drops as well)

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Retore the device from your iCloud or iTunes backup.
iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

Hi,
My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
Expecting some quick solution in this regard,
Thanks
Prabhu

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Hi, i need to cancel adobe membership, i am having a free trial thing right now, but after a while it will renew automatically to a monthly fee, which i don't want to deal with, so would like to cancel it right now

Hi, i need to cancel adobe membership, i am having a free trial thing right now, but after a while it will renew automatically to a monthly fee, which i don't want to deal with, so would like to cancel it right now

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

After applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting)

After applying full scroll bar to the page including header and footer, I have provided content to
the page more than 100 lines and try to format the text from ribbon actions(format text area). On mouse over of font or fore color, the control jumps to the highlighted content area and not able to select the color. The page scrolls down and not able to click
on any action.
Consider this scenario also.
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance
to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as
Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but
I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before. Any feedback would
help.

Hi,
According to your post, my understanding is that after applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting).
I try to apply full scroll bar to the page including header and footer, the ribbon is missing after I scroll down to the web part. And I cannot apply the "Paragraph" markup style to the content.
I recommend to use the SharePoint core styles to preserve the native functionality and GUI.
By design in SharePoint, the ribbon is always at the top. When you select the content, you can apply the "Paragraph" markup style in the ribbon.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

I am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

i am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

basically i bought this phone from canada & using it in india. i tried to contact apple support in india, they told that the warranty is valid in the country where you purchsed this phone. very ammazing. Apple is a very big brand name & they are not serving their costumers in other country. any suggestions?

Satellite Pro L40 PSL4BE restarts automatically after shutdown

Hi,
I have an issue where my laptop starts up automatically after seemingly going into hibernation and shutting down by closing the lid. (I have it configured so it goes into hibernation when i close the lid.)
The strange thing is that this only happens when it's hooked up to the power supply. If i close the lid when it's on battery power it goes into hibernation and remains shut down as it should.
This all started when i changed my power scheme from "Balanced" to "Performance". Setting it back to "Balanced" did not help, nor did setting it to the lowest setting. Also, it used to come back out of hibernation automatically after i opened the lid, this no longer happens either.
I am unsure of whether this is a software or hardware issue.
Over the weekend i've reinstalled the laptop using the supplied recovery discs and applied all updates and patches for Vista but the problem remains, so now i am leaning more towards it being a hardware issue even though i have no idea what kind of hardware malfunction could be causing this.
Does anyone have an idea of what could be causing this behavior?

Hello,
Thanks for the replies. I'm afraid i haven't found any solution yet.
Over the weekend I installed Ubuntu on this laptop and tried to hibernate but it demonstrated the exact same behaviour as under Vista. it shuts down and like 10 seconds after it boots back up. this leads me to believe that the problem is hardware related in some way. it would surprise me that both vista and a linux distro would have the exact same issues. So now i'm back on the Vista i restored using the restore discs.
I haven't tried installing a windows xp yet though i suspect i'll have the same issues.
@Sasha
The thing is that the problem isn't in windows hibernating or not shutting down when the lid closes. It does that part just fine. What it shouldn't do however is restarting by itself whithout my intervention several seconds after it shut down. no matter the setting, that can't be normal behaviour.
@borge & Jonnie
Have any of you already had contact with the toshiba helpdesk on this issue? if so, what did they say? i haven't had the time to call them yet.
I'll update as i find out more.

Motorola DROID X Restarts Automatically After I Shutdown

My Motorola DROID X Now Restarts Automatically After I Shut It Down (50% of the time?). It worked great at first.
I have used soft & hard resets & this problem persists.
Is there a software fix for this?

Thank you Vanessa for acknowledging the problem and for Verizon working on a solution!
Mike
VanessaC_VZW wrote:
Good morning and thanks for all the feedback!
This issue has been lifted up, as there have been other reports of the Droid X powering up on its own after being turned off. Our product team is working to resolve this; however, there is no date on a software resolution yet. Once a software update becomes available, it will be pushed through your phone.
We appreciate your patience.
Thank you,

Open follow up transaction type screen automatically after confirm account

Hi Gurus,
I have a transaction type Z010 for interaction record that is copied from standart 0010 transaction type.
I define dependent transaction type SRVO that is service order as a follow up of Z010
My requirement is to open automatically open service order screen after confirming account
As agents must do everything vey quickly while they are on phone, it is needed urgently.
Now they have to open Z010 interction record screen, have to press follow up button, click to clipboard and then can open the scrren of service order.
How can we automatically open service order screen after confirming account??
I will be very pleased if you will help...
Thanks.

Hi Denis, thanks for reply.
I read it and see that interaction record is automatically created. How can it be made, is it a standard customizing?? Our interaction record is created automatically when follow up process-it is service order here- is created. First we confirm customer, then press to Interaction Record at the left hanside, then in this screen we press follow-up button, then click on Activity Clipboard, then service order screen is opened. I want to pass two steps, pressing Interaction Record and pressing follow up record, how can I do this??
Exactly I have to define process type Business Activity for interaction record, I can't give Service Order process type directly to interaction record. Service Order type must be dependent to business activity, is it true?? If there is a way to directly giving service order type as an interaction record type, and making interaction record creation automatically after confirming, my problem is solved as very well.

After updating to Firefox 32.0.3 Print Dialog box will not apear in XP/Win7Pro after a while but a restart of Firefox will allow it to show up again..

After automatically updating to 32.0.3 last Thursday and this Monday on all our Staff and Patron computers both Win7 pro and XP pro we have seen Firefox sessions that will not bring up the Print Dialog. The Print Preview dialog will come up but no print button or print menu item will bring up the Print Dialog. After you close Firefox and reopen it the Print Dialog box will work again for some time. The websites that Patron and Staff use during a session are different and done seem to be the cause. The Firefox settings are at fault because a simply restart of just Firefox fixes the issue and no other web browsers or application has any problem with displaying the Print Dialog at any time. Again this began on all the computers as soon as 32.0.3 was installed automatically over night.

Hi NPLD,
Thank you for your question, I understand that there are multiple computers that no longer have a working print dialogue after a while of using Firefox. However after a restart, the print dialogue continues to act normally.
Does resetting the printing settings on the affected computers only temporarily change this as well?[[Fix printing problems in Firefox]]
I noticed it when I tested this page: [http://www.housebeautiful.com/decorating/home-makeovers/1920s-home-before-after?src=spr_FBPAGE&spr_id=1451_94608649#slide-2] However I cannont reproduce it all the time. The print icon in the page has a opened a printable view and then the print dialoge comes up. When I switched to another program, that icon did not open the preview.
Do you notice any about:config entries that change when you see this start to happen?

My Qosmio shutdowns automatically after a while

Similar Messages

Maybe you are looking for