My question is how i manage that delta infopackage in my process chain

Hello Sir,
i have a delta infopackage which sciduled in a process chain but it does not pick any delta i have to manualy run repair full infopackage dally and then delta comes in to picture my target is a dso so it does't have any problem.
the datasourse is costamize
delta pointer is cal day
my question is how i manage that delta infopackage in my process chain

Hi
IS the process type "delta infopackage " is executing in the process chain or not? Plz once check in SM37 Tcode . and Why r u running the repair full request infopackage . If u miss any delta records then only u have to run the repair full request . If delta records are not extracted then better to manually extract the delta infopackage.
Plz once check in SM37 Tcode whether the execute infopackage process step is running or not? or any error has occured in that PC.
Thanx & Regards,
RaviChandra

Similar Messages

How i run that delta infopackage in my process chain

Hello Sir,
i have a delta infopackage which sciduled in a process chain but it does not pick any delta i have to manualy run repair full infopackage dally and then delta comes in to picture my target is a dso so it does't have any problem.
the datasourse is costamize
delta pointer is cal day
my question is how i run that delta infopackage in my process chain
Thanks...

Hi
IS the process type "delta infopackage " is executing in the process chain or not? Plz once check in SM37 Tcode . and Why r u running the repair full request infopackage . If u miss any delta records then only u have to run the repair full request . If delta records are not extracted then better to manually extract the delta infopackage.
Plz once check in SM37 Tcode whether the execute infopackage process step is running or not? or any error has occured in that PC.
Thanx & Regards,
RaviChandra

How to manage the "no data" loading in process chain

Hi,
I want to load some master data in delta mode with a process chain. The treatment works good except in one case.
If I have no data selected during the extraction ( cause the system doesn't find any data matching with the delta field ), the process chain appears in red as if some problems was encountered instead of giving a traffic light green.
How is it possible to manage this case of treatment as a normal treatment ?
Thanks for your help.

Marc,
in RSMO ,
Using Settings -> Evaluation of Requests ->
if no data is available in the system, the request
select Green (is Judged to be successful). this will cause the load to be successful if Zero records are fetched and the Process chain will not fail.
Cheers
Tushar

Error in delta run in the process chain

Hello Experts,
I have a delta infopackge that runs everyday , since many days the process chain is giving error at the IP.
The IP is red everyday and the following objects does not start, however when I check in the monitor the ip is completed successfully without any errors.
I checked the logs which is in greeen in the batch job , please find the details below.
Job started
Step 001 started (program RSPROCESS, variant &0000000111903, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 created request
Request REQU_4L001XOSR2IQQ14M90QLO1CTA could not be generated with InfoPackage REQU_4L001XOSR2IQQ14M90QLO1CTA without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 in Process Chain ZIM_INT_ORDER
Entire chain now has status 'A'
Job finished
Could you please suggest.

Hello
Thanks for your reply
the problem was with the way it was schudled, the chian was ticket at periodic run , as a result it as running automatically, and causing problem.
I have removed the periodic n saved it again ...the error stopped appearing !
The issue is resolved now.
Thanks for your help.

How to implement an abap program in a process chain

Hi,
I have an ABAP Program which uploads data into a table.
Now I want to implement this abap program in a process chain.
Please could anyone tell me how this can be done.
Thanks & Regards,
Sushanth H.S.

Hi,
A process chain is a background task for processing data into a BW instance .
I want to know how to integrate an abap program into the process chain.
Regards,
Sushanth H.S.

How to insert Info spoke /Open hub in process chain

Hi,
How can I include Info spoke in my process chain.
Thanks

Hi,
Including InfoSpokes in Process Chains:(IMP Link):
http://help.sap.com/saphelp_nw04/helpdata/en/59/90070982d5524b931ae16d613ac04a/content.htm
Complete Open Hub Information:
http://gassems.com/SAP%20Reources/Open%20Hub%20Service.pdf
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 10, 2009 10:49 AM

How to find a metachain name from local process chain id or name

how to find a metachain name from local process chain id or name

Hi Dwarakanath,
Please post your query in the correct topic space in SCN. For help, see this document:
Find Topic Spaces on SCN (Forums)
Thanks,
Kristen

How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???

Hi BW Gurus,
How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???and what are the
measures i need to take care before doing the same .
prasad

Hi,
Simply add these infopackage groups into process chain and schedule the process chain.
Hope this helps.
Assign points if useful.
Regards,
Venkat

Question about how Oracle manages Redo Log Files

Good morning,
Assuming a configuration that consists of 2 redo log groups (Group A and B), each group consisting of 2 disks (Disks A1 & A2 for Group A and Disks B1 and B2 for group B). Further, let's assume that each redo log file resides by itself in a disk storage device and that the device is dedicated to it. Therefore in the above scenario, there are 4 disks, one for each redo log file and, each disk contains nothing else other than a redo log file. Furthermore, let's assume that the database is in ARCHIVELOG mode and that the archive files are stored on yet another different set of devices.
sort of graphically:
    GROUP A             GROUP B
      A1                  B1
      A2                  B2The question is: When the disks that comprise Group A are filled and Oracle switches to the disks in Group B, can the disks in Group A be taken offline, maybe even physically removed from the system if necessary, without affecting the proper operation of the database ? Can the Archiver process be temporarily delayed until the disks (that were removed) are brought back online or is the DBA forced to wait until the Archiver process has finished creating a copy of the redo log file into the archive ?
Thank you for your help,
John.

Hello,
Dropping Log Groups
To drop an online redo log group, you must have the ALTER DATABASE system privilege. Before dropping an online redo log group, consider the following restrictions and precautions:
* An instance requires at least two groups of online redo log files, regardless of the number of members in the groups. (A group is one or more members.)
* You can drop an online redo log group only if it is inactive. If you need to drop the current group, first force a log switch to occur.
* Make sure an online redo log group is archived (if archiving is enabled) before dropping it. To see whether this has happened, use the V$LOG view.
SELECT GROUP#, ARCHIVED, STATUS FROM V$LOG;
GROUP# ARC STATUS
1 YES ACTIVE
2 NO CURRENT
3 YES INACTIVE
4 YES INACTIVE
Drop an online redo log group with the SQL statement ALTER DATABASE with the DROP LOGFILE clause.
The following statement drops redo log group number 3:
ALTER DATABASE DROP LOGFILE GROUP 3;
When an online redo log group is dropped from the database, and you are not using the Oracle Managed Files feature, the operating system files are not deleted from disk. Rather, the control files of the associated database are updated to drop the members of the group from the database structure. After dropping an online redo log group, make sure that the drop completed successfully, and then use the appropriate operating system command to delete the dropped online redo log files.
When using Oracle-managed files, the cleanup of operating systems files is done automatically for you.
Your Database wont be affected as you can operate with 2 redo log files in each group as The minimum number of redo log files required in a database is two because the LGWR (log writer) process writes to the redo log files in a circular manner. so the process will hang becuase you are having 2 only groups if you want to remove 1 add a third one and make it the current group then remove the one you want to be offline.
Please refer to:
http://download.oracle.com/docs/cd/B10500_01/server.920/a96521/onlineredo.htm#7438
Kind regards
Mohamed
Oracle DBA

How to check that Delta is not captured?

Dear Experts,
I am using 2LIS_02_ITM datasource.
PO is created using a program.
The next step in the program, it can change a field in the PO depending on logic, using a abap command 'update'.
Sometimes, this change is not captured in the delta queue, it seems.
why i say this is the PO shows the field value but BI delta load does not.
It is using Queued Delta now.
Initially, the program uses a command 'update' to update the field in PO.
Now, we decided to use ME22N program to ensure delta will be created.
The problem is happening to some records and not all delta records.
Its very difficult to tell what is the cause.
What is the standard method to check that Application table data is not captured in Delta Queue by the extractor?
Or
If PO can show the field value, is there a possibility that Delta may not capture this field change?
regards
Pascal

Well just throwing few possibilities:
1 - Basically PO creation, change in values/quantities etc are Business transactions and they generate evens known as BTEs.
Now we have to explicitly inform SAP ECC that which applications can use BTEs and we do this by tcode BF11.
Check if the software component creating and changing POs is properly linked to BTEs and if BW is set as active in BF11 tcode.
2 - If point 1 is checked and nothing is found to be incorrect, please check if Industry sector is correctly chosen (SBIW). Industry sector generates a set of Transaction keys (BWVORG) without which the values are not updated in BW.
Also rightly pointed by Tbollo, you need to ensure that there's a pattern in the missing docs to identify the rootcause.
Debanshu

Initialization of delta loads possible with process chain?

hello all,
followed situation:
i load data from file and sap extractor to ods 1. from this ods i have an automatic delta load to another ods 2, where the data are filtered and aggregated.
its possible that some of the data change their state from filtered out to in but are not in ods 2 because of the earlier criterias they had have. now i want a weekly load (initial load) from ods 1 to ods 2 and a daily delta load if new data arrived ods 1 to the no 2.
i tried to create a process chain for that but i cant! i cannot use the info package for the initialization of the load from ods 1 to 2 because it is generated info package. and if i use the process "update ods object data" there is always tried to make a delta load! at first step i delete all data of ods 2, so i need an initialization with data as next step.
how can i do what i want?
thanks for any idea
Frank

Hello Tom,
ok, i understand but i dont know how...
The only way i know to create an InfoPackage between ODS is to use "Update ODS Data in Data Target" of the context menu of an ODS. Then i chose between full/delta/init load and the infopackage will be generated. How else can i create it?
Frank

How to run R3 program in BW using process chain

Hi,
I need to run a delta program of R3 in BW using process chain.
Can any one suggest me how to do that.
Its urgent.
regards
Bhanumathi

hi
Use the ABAP Program process type.
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Regards
Dina

How to trigger an ABAP program in a Process chain

Hello Forum,
1. In a process chain, if a program fails, how can we re-run it?
2. If the process preceeding the ABAP program fails, how can we start the program?
3. If an Infospoke fails in a process chain, how can we trigger that?
Thank you,
Its my pleasure to assign points,
raj

Hi,
1. U have to first check whats the reason for the failure. check in the monitor screen details button, the error message will be displayed, check the error, correct it. and to proceed with further right click on the subsequent process use Repeat option , the loads will get continue.
2. same here, if it fails check the reason, sometimes if two parallel process trying to access the same program Lock may occur, stop one process, once its done start the second process, use the transaction code SA38>select ur ABAP program, the corresponding variant->this is for running the ABAP program in the backgroud..if u want to run direct means Select the Process types Under the general services u find an ABAP program
3. same here too u should find the reason why it fails, and rectify the error, and use the repaet option to proceed with further.

Delta load problem in process chain

Hi,
I have ODS givng data to another ODS. The init of this flow was done manually...Now i have created process chain in which further processing has variant as "execute infopackage" as the delta package made .. now when i check this process chain its giving me error ""Delete init. request
REQU_49LKNGG0SE5966D3S7SQYYDQX before running
init. again with same selection"" .. Actually this is not the Init req which i ran manually..this is the req which was run when i ran this process chain... what shld i do to add only delta IP in process chain so that i dnt ve to delete init
Thanks
Prashant

hi,
first load all the init loads from the ods to cube. then u have to create the delta infopack and include that in the chain.
create the int info pack under the infosource 8<ods name>
trigger that infopack, create the delta infopack under the 8<odsname> infosource , and you have include that in the PC.
Please do changes in your process chain.
Local chain 1 - start -> load to ods -> activation of ods ->further processing(remove the infopack in this process maintain variant).
Lcoal chain 2 - start -> delete index ->load delta to cube -> create index -> roll up (if needed)
Main chain -> start -> local chain 1 ->local chain2
Ramesh

How do we raise an event to trigger process chain in BI

Hi Guru's,
I am having Oracle tables as one of my source systems, I developed the code using DBConnect.
Now i need to run my Process chain when ever table get data from downstream systems.
how do we raise an event to trigger the process chain in BI WHEN EVER ORACLE TABLE GET DATA?
Thanks in Advance,
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:21 PM
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:27 PM
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:27 PM

Hi Naveen,
i think we use ABAP program under general services to generate an event.
searching form gave me following threads which might be helpfull
1) explains Evenet generation [Event raising procedure]
other helpfull threads
[Standard tools for Event raising]
[Event in Process Chain]
i could get the process for triggering it weekly,,,it may giv u some help in resolving
change the Start Process (1st process) in your Process Chain to trigger it to start after the event. To do this, maintain the Start Process of your Process Chain. Select "Direct Scheduling" and click the "Change Selections" icon. This will bring up a Start Time window. Click the "After Event" icon and enter your event name. Also, click the "Periodic Job" (this will insure that all the jobs created for each process in the Process Chain will reschedule themselves after executing the first time). Now save the Start Process, and reactivate and schedule the Process Chain.
To execute the Process Chain, use transaction SM64 to trigger the event.
If you want to trigger the event in batch, you will need to create an ABAP program that calls function module BP_EVENT_RAISE (sample ABAP code is available in this forum if you search for "BP_EVENT_RAISE").
We create batch jobs where we call an external program called SAPEVT, located on the server, and I believe is available on all SAP clients, with the following parameter:
EVTID('WEEKLY_PROCESS') SID(PU3) NUMBER(00) EVTPARM()
This will trigger the event WEEKLY_PROCESS.
See if this helps.
regards,
NR

My question is how i manage that delta infopackage in my process chain

Similar Messages

Maybe you are looking for