My question is that my ipod touch say ipod disabled
my ipod 8gig says ipod disabled connect to itunes but itunes doesnt reconize it
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
my ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
I have a ipod touch that my son forgot what the passcode is so i went to itunes to restore it and it goes half way through the restore process then itunes doest recognize the ipod the my ipod says ipod is disabled connect to itunes but itunes brins up the message enter passcode does anyone know what to do or how to get this to work
Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212 -
HT1414 Why does my Ipod touch say its disabled for 22,699,014 minutes?
My ipod touch is disabled asking for a passcode.How do you get to the passcode screen?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((
i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE
-
My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?
http://support.apple.com/kb/HT1212
-
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. PLEASE HELP ME
I have the same problem with mine... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
My ipod touch says that I am connected to the internet through the setting tab but when i try to get on the internet it says no connection. I tried new downloads and updats and connectioning to other wifi in variouse places and still no luck.
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset<Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
I reset my computer and ipod and it says that my ipod is syncing music but when I look on my ipod touch there is no music there. How can i fix it? I have backed up and restored my ipod touch 4th gen several times.
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Device Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
I am trying to attach an Ipod touch to an older Power Book G4.
Itunes says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1).
When I try to install the latest Itunes version 10.3.1 Mac says ("Open failed" requires Mac OX S 10.5.Click here and install the software.
(58765) -
i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it
Do as the manual says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
You'll probably lose all your data
Maybe you are looking for
-
Installtion problem Developer 6i on Windows XP platform(SP3)
Can I Installed Developer 6i with Oracle 9i(9.2.0.1)on Windows XP platform if the service pack 3 is present there. After successfull installation of Oracle 9i(9.2.0.1) on Windows XP(SP3) machine , I have failed to install Developer 6i. please help me
-
Just installed a new HP8610. Wired setup (not wireless). It's plugged into the outlet (not a power bar) plus USB to back of PC (which is Windows 7 Home Premium). Prints ok from notepad but is painfully slow and halting printing from the PC. Also cann
-
Webcam and keyboard light not working on my macbook pro
I just reinstalled snow leopard on my macbook pro and I can seem to get my webcam to work, the light on the keyboards are not coming on either, has anyone encountered something like this before
-
Leap year certficate generation bug
Looks like Cisco has a leap year certificate bug when generating certs (I only tried it on web-admin certs) today, Feb 29th, 2008. If you generate a cert for your controller today, you won't have HTTPS login as your cert will be invalid, Feb 29th, 20
-
I don't want(getting started with ff page to come up every time i start ff.