My rebel T6s wont recognize sd card

Within the last few days, I purchased a Rebel T6s 760D. Today upon, open the box and setting the camera up, I foud that not one SD card can be be formatted or recognizable in the camera. I've used over 7 different perfectly good SD cards that have worked in the past on other Canons. Each time I put a SD card in the camera it says, "Card annot be accessed." Each time I try to format the card it says, "cannot format, change card." Please help. Thank you

Compatible cards (according to my T6i manual):SDSDHCSDXCFor movies Canon recommeds a class 6 or better card.Do all your cards work in a computer?Are you trying to use a micro SD card in an adaptor? Micro SD's will not work.I suggest going out and getting a brand new top of the line SD card and trying it. I suggest a SanDisk - Ultra 8GB SDHC UHS-I Class 10 Memory Card. That is what I'm running in my T6i right now. The 8g will run you about 14 bucks at a big box store.Also if there is any data on your cards you might want to low level format them on your computer and hopefully the camera will be able to read it then I suggest you format it on the camera.Good luck.

Similar Messages

Iphoto wont recognize memory card to load pictures

all of a sudden iphoto wont recognize the memory card to import pictures. when you put card in reader iphoto launches but you dont see the card on the left hand side and it doesnt ask you to import the pictures. If you remove the card you get device removal error - then card appears on left and import button shows up but nothing happens when you push the button??
If you go to Finder the card is there and i can "select all" and drag them to iphoto. This is really strange - please help?

If your card shows up in the Finder then you can still import from inside iPhoto. Do File > Import to Library, then navigate to the camera card. You can preview the photos, select the ones you want to import, and import them to iPhoto. This is actually my preferred method, since it allows me to choose exactly which photos I want to upload from my camera.
Don't remove the card reader from the USB port until you have ejected it properly. You can do that from in the Finder. Click on the little triangle eject symbol next to the name of the card (below your HD icon). When the card disappears from the list it is properly ejected and you may safely disconnect the card reader.
I don't know why the card suddenly stopped appearing in the iPhoto Source List. One thing you can try is to use your camera to do a low-level format of the card. This has been known to improve a card's performance. The second thing you can try is to delete iPhoto's preference file. Close iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist, then move that file to the trash. You'll have to reset iPhoto's preferences back to your liking after you launch it.

Wont recognize SIMM card

The iPhone will not recgnize the SIMM card. Went to AT&T and replaced the SIMM card.
Still no luck but placed it into the old Treo phone and it works fine. So we know the SIMM is good.
Placed it back in the iPhone and it still wont work. This is a pre-ordered phone via the internet.
1 800 myiphone could not help either. Anyone have any ideas???

What is the exact error message you see on the iPhone?
Have you tried to completely power down the iPhone (hold the power button down until you see the red slider -- then slide the red slider). Next, hook the iPhone up to iTunes on a computer with Internet access. Then be sure the phone powers on.

Wont recognize GL2

Ok so my imac broke and I got a new one and ever since then, I cannot upload from my GL2 into FCE. I use the DV NTSC Firewire basic like usual and still wont even let me capture anything. This is getting very frustrating and I have even tried capturing from my mom's sony dv camera and it wont recognize that either. I have tried that camera on multipe capture settings with no success. Someone help me please!!!

Hi
Most of it in this list apply to FC too.
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

T4i not recognize any card

T4i not recognize any card. The camera is new and never took a picture because the camera does not recognize any card.
I tried to use a canon SD card and the card identification light lit but the camera does not read the card.
I used several cards and it does not recognize the card.
I need help.
Reynaldo

reynaldomfbr,
I was sorry to see that your EOS Rebel T4i isn't able to read these cards or perform formats. Since multiple different cards seem to have this issue I would recommend setting up a repair online to get the camera evaluated. I regret any inconvenience that this may cause you at this time.
To start your repair process, you'll need to complete a a repair request on the web site.
http://www.usa.canon.com/cusa/consumer?pageKeyCode=onlineRepairLanding
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

System wont recognize AGP Speed Setting

When I go into my ATi settings interface I set my graphics card to run at 4x. My system then resets to test the new setting and when I go back the system reads that the agp setting is back to 1x. I should be able to set my graphics card to 4x and 8x but my computer wont recognize it or accept it. What do I do
865G Neo2
Windows 2000
Pentium 2.6 HT
Ati Radeon 9600 XT All-in-one-Wonder

use live update to update your motherboard drivers.
or get them here http://downloadfinder.intel.com/scripts-df/Detail_Desc.asp?agr=N&ProductID=816&DwnldID=7948
I'd uninstall catalyst first using cat uninstaller, then after reboot delete the ATI folder left over. Then install chipset, and reboot.
Then reinstall catalyst and reboot
Also disableing fastwrites is a good idea for a 9600xt.
http://www2.ati.com/drivers/cat-uninstaller.exe.

MSI Gt60 0nd wont recognize USB 3.0 mass storage device (WD)

Hi all
my notebook MSI Gt60 0ND wont recognize USB 3.0 mass storage device (WD), Western digital my passport 1TB USB 3.0 \ USB 2.0Compatible.
i connect the WD my passport to the SS USB 3.0 but it wont be recognized it only gives it electricity to spin but that's it, on the other hand if i connect it to the USB2.0 it is recognized.
i installed all the drivers from MSI to this computer the Intel USB 3.0 and the Intel chipset which are the only drivers that can be related to this.
i use windows 7, even when i had windows 8 it didn't work.
i tried upgrading the Western digital my passport firmware and even got the software thought that maybe it could help but still no luck.. any one got any idea for a solution ?
Thanks in advance,
David.

Does anything else work when you plug it into your USB 3.0 port? How about a mouse? Keyboard? Another USB Flash drive?
If nothing works in that port, your USB 3.0 port or card is probably bad. RMA time.

Trying to update my iphone 5s but my itunes wont recognize my device and my home screen is stuck telling me to connect to itunes. HELP!!!

Clicked on the new iphone update on my phone since i finally have time to update it, and my phone turned off and now its stuck telling me to connect to itunes. ive had it connected to itunes yet it wont recognize my device. WHAT DO I DO?!

This article explains what to do if your phone is disabled. Follow the steps carefully.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

Turn on without Home/Power Button

My macbook pro retina wont recognize my external hard drive

my macbook pro retina wont recognize my external hard drive.
i opned the hard drive in the past on my computer and used it alot.
one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
please help me!

For starters try a PRAM reset.
DALE

I updated my Apple Id and password by email and received a confirmation. However my iphone still has the old ID and wont recognize either password. I am unable to access new apps on my phone. How do I get my ID to update on my phone?

I updated my Apple Id and password by email and received a confirmation. However my iphone still has the old ID and wont recognize either. How do I update the user id on my phone? I assumed it would update when I restarted butit did not

Downlands wrote:
I cant sign out without the old password for the reduntant appleid. I cant remember that password and because the appleid doesnt exist except on my iphone no email arrives to tell me. This is a deleted appleid but I cant get rid of it on the phone. can you help please?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Computer wont recognize 10GB Ipod Gen 3 - Please Help

Alright, Im not an idiot and I read every post related to this subject. I reviewed each of the following links and did everything they told me to do:
http://docs.info.apple.com/article.html?artnum=305136
http://docs.info.apple.com/article.html?artnum=301343
http://docs.info.apple.com/article.html?artnum=61711
I recently upgraded to the newest iTunes version and now my older Ipod is no longer recognized by my computer. iTunes doesnt open, it just gives me an error message in the bottom right corner saying Unknown Device. Ive tried looking for / updating drivers, reseting, everything and nothing works. I tried every USB port on my laptop as well. Running Win XP. Can anyone offer any other suggestions on how i can fix this???
Thanks

Its been working perfectly for 4 years until last week. I have the USB/FireWire combo for hooking it up to my computer. It worked with all the older version of iTunes and now that 7.1.1 is on there, it wont recognize it at all. The computer is convinced there are no drivers for the "unknown device" and all searches performed for the missing drivers come up empty. The computer cannot see the iPod as an iPod, and none of this happened until I downloaded the most recent iTunes.

Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L

Windows Wont Recognize

I'm updating my Dads iPod for him and for the first time ever, Windows/iTunes wont recognize it.
On the iPods display screen it says do not dissconnect so its not my USB ports nor the cable. Any ideas?
BTW, this is the iPod Color U2 version thing

This http://www.copytrans.net/helpcopytrans.php#22 is an interesting iPod detection problem check-list.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

My rebel T6s wont recognize sd card

Similar Messages

Maybe you are looking for