My Recovery Drive is Full, How do I clean it up? (HP Pavilion dv7t-4100 CTO)

Hi, I'm not too comfortable with messing around with the inner workings of my computer, but the Recovery Hard Disk Drive has been slowly filling up for a while now. It is just about full and I was wondering if there was any way for me to clean it up/restore it without messing up my programs and files? I did it once before, but I can't remember how and I'm too scared to mess with it without some kind of instruction.
I have a USB hard drive for making back ups that I use now as a precaution if something goes wrong with cleaning the Recovery Disk.
My computer is a HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC running on Windows 7.
If someone could give me some advice, that would be wonderful.

Hi,
See the HP document on the following link regarding this issue - although the document refers o Vista, it also applies to Windows 7.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

My hp d recovery drive is full how can i clean it up or delete the earlier information

hp pavilion dv9310ca / windows vista

Where do you have system backups stored?
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive Replacement

Hello,
I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC and I had had hard drive issues from within warranty period. i.e. I purchase in 2010 and had a hard drive replaced in 2011 and again in 2012. Next time it failed in 2013 (almost 11 months apart on an average).
Last time when it failed, the warranty had expired so I thought of giving it a few try e.g. running thru bad sector fixing/writing-off softwares from seagate, Toshiba....this got me out of Smart Drive Error.
I have been using the HDD for sometime now but want to be prepared for the next round and I'm sure it'll be gone for good the next time.
Current HDD is 640GB, 7200 RPM Hardrive (replaced in 2012). HP Part# 621046-001.
When replacing, can I use ANY 640GB hard drive? Can I use a hard drive that is larger than 640 GB? Different RPM?
Any suggestions about hard drive?
The recovery discs I had received with the replacement drive did not work correctly. I had to use the first set I had created right after I purchased the laptop.
Thank you.
--Pratik Patel
This question was solved.
View Solution.

Hi Pratik Patel
According to product manual:
Your system supports SATA 9.5mm or 12.5mm , 2.5" HDDs
supports upto 2 hard drives
supports SSD too.
Single hard drive configurations supported:
250GB, 320GB, 500GB @7200RPM @9.5mm
640GB @5400RPM @9.5mm
750GB, 1TB @5400RPM @12.5mm
160GB SSD
If you want dual hard drive configurations, please click following link (user manual):
http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
But, there is not hard fast rules that only 5400rpm can be used instead of 7200rpm, which was used to replace your earlier hdd.
hope this has helped you.
thanks
Visruth
**CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH SAME PROBLEM**
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

E & recovery drive is full!

Just bought a brand new HP Pavilion dv6t-6c00 CTO Entertainment Notebook PC. I am receiving notices that my recovery drive is full and so is my E drive *HP tools* How do I clean these off? The computer will not let me run a backup.

Hi,
You will need to stop whatever is storing or backing-up data to these partitions - although for Vista, the document on the link below should help - as it suggests, make sure that 'Restore Points' are not being created for these partitions and also that Windows Back-up is not accessing them.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&tmp_track_link=ot_recdoc/c01896818/en_...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - What do I need?

Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (Product # WV703AV). It has room for two harddrives but only came with one. What would I need in order to install the second hard drive? Would I need just a connecting cable or do I also need caddy or kit?
Also, could I get a solid state? Would my notebook support that or does it only use regular ones?
Currently, I'm running Windows 7 64bit. I've got a 500GB hd (which came partitioned with hp tools/recovery).
Any help with what I would need for a traditional hdd or ssd would be greatly appreciated. I tried to look through other people's posts first, but couldn't find anything specific to my model. Thanks for your time!
This question was solved.
View Solution.

Hi:
The only place I know of where you can get a 2nd hard drive kit is from this vendor.
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
Your notebook should be able to work with a SSD but I cannot guarantee it.
I really don't see any point in adding a SSD unless you make it the primary hard drive, and in order to do that, you would need to get a SSD the same size as the original 500 GB hard drive to use the recovery disks to reinstall the operating system.
Most folks get smaller SSD's and they use the W7 product key to activate a plain installation of W7.
If you can read all 25 characters of your windows 7 product key you can make your own installation media and use that to install Windows on a smaller than 500 GB SSD.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link below. You need a 4 GB flash drive to use the USB method of compilation.
http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/

Pavilion DV7t-4100 hard drive upgrade fail

Hello all, thanks for taking the time to read my question. I'm stuck in the process of upgrading and HP Pavilion DV7T–4100 laptop. The machine is a couple of years old runs Windows 7 and came originally equipped with two Toshiba 300GB hard drives. The hard drives are configured for one drive,C:, to host the operating system the second drive,D:, to host data. The D drive has now run out of room. I have purchased a Samsung spinpoint 2TB hard drive in order to have more space, but what I thought would be an easy upgrade turned into many long hours and frustration, not to mention funny looks from the wife.
Here is what I've done to date:
1. Connected the new 2 TB hard drive to the computer via USB (Windows recognizes hard drive)
2. Cloned the D: drive onto the new hard drive using Seagate disc wizard (also tried mini tool partition wizard) maintaining the original partition size.
3. Turned the computer off, removed the D drive and installed the 2TB drive in its place.
4. Restarted the computer only to find that Windows would not see the new drive. Attempted to find a drive-by going to computer management /storage/disk management where was not present either. Rebooted the computer once more, went into BIOS where I discovered that it does not see the new drive. BIOS does not have an option to discover new hardware.
5. Suspecting a bad drive, bad cable, or other bad things, I replaced the original D: drive back. Everything seems to work fine. The computer sees the original D: drive through SATA and the replacement drive through USB. Leaving me where I started, still out of room....
6. Following new advice, I reformatted to drive with just a single volume and no data in it. I didn't want to drive via SATA but neither bios norwindows and see it.
My question is: How do I get the BIOS to recognize the replacement hard drive, so that windows will recognize the replacement hard drive, so that my wife won't recognize I'm an idiot?

Hi
You're welcome
Few things:
Update bios & chipset from your product download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4317...
Now put the new 2tb hdd & check
If no joy, don't remove it - go to disk management , take a screenshot & please post it here.
Now power off, wait - then power on again - go to bios setup & boot device options to check if you can see the 2tb hdd in anywhere here.
If no joy, proceed & shut down - take out 2tb and connect it via USB , power on - go Disk Management - take a screenshot and please post it here.
Hope you have formatted previously the hdd from Disk Management by right clicking the hdd in the lower graphical console - New Simple Volume -> format, Am I correct?
Also, please post the model number/name of both Toshiba 300gb old hdd & the new 2tb Seagate hdd.
AT LAST,
Just blow out with dry canned air - the sata port of second hdd bay , after shutting down laptop completely & after doing a hard reset.
And try connecting 2tb hdd again and check.
Also, can you check if the 2tb hdd is working by testing it in another laptop by connecting via sata.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC

Hi,
I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I opened the back of the notebook, I realized that a second hard drive could be installed, if desired. I would be interested in doing this! My current primary drive was (and will be again) a Toshiba 1 TB Internal hard drive Serial ATA-300 2.5" 5400 rpm, model MK1059GSM. I understand (from reading a previous post) that for the second hard drive, I will need to purchase a "2nd HDD Caddy & Cable for HP dv7-4000, dv7-5000, dv7t SE" (the purchase link the tech in the other post referred to was http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345); and now I need to decide on the size (and other stats) of the hard drive that I will buy to install and used as the secondary drive. The HP customer service rep I spoke with on the phone about my primary drive replacement said that it is usually recommended to not go any higher (in capacity) than the primary drive, for the second drive, to ensure a more "stable" system (but I am not sure about the level of"technical" knowledge he has about the inner workings of the notebooks). However, from my upgrading experiences with desktop PCs, I was usually able to go as high in capacity as I could/desired; as long as the physical size of the drive was the same, and it was compatible with my system. And I usually did choose to go with a larger capacity second drive, as this was where most of my data and media files were stored (with the primary being used for mostly operating system and system files). This is my first time "upgrading" a Notebook, so I wanted to check with the techs here on the board- would it be a problem for me to go with a secondary drive larger than my primary drive's 1TB capacity? Also, are there any other factors to consider and keep in mind when selecting a second hard drive? Any advice and replies will be greatly appreciated. Thanks so much for your help with this! -Brian

You should be able to go as high as 2TB.
I also own a,(Older), DV7 notebook which has dual drive capability.
I bought my caddy from the place recommended and got everything needed including screws !
I matched the capacity in mine with an exact same hard drive and have never had a problem.
Minor battery life noticable but that was it.
Your system BIOS is what will hold you back from say a 3TB drive.
You can go to HP site and check the specs on your model and find out for 100 % sure.
HP Support & Drivers | United States
I would recommend doing what I did and match the drive exactly.
Good day !

HP Pavilion dv7t-6c00 CTO Blue screen at start after installing new AMD Mobility Radeon Driver

hi, after installing the new driver from AMD (14.4) windows shows blue screen at startup, there seems to be comflict between this and the Intel HD 3000 driver provided on the official website of HP, I try to install the driver from Intel and windows working mode only basic colors so I went back to install the old intel driver, both drivers can be updated in the official website to support the latest games and programs?

Hi RodMoltedo,
Welcome to the HP Support Forums!
I see you are having some issues with the updates to your AMD and Intel Graphics cards on your HP Pavilion dv7t-6c00 CTO Entertainment Notebook PC. Could you please tell me what operating system you are running on your computer and where you went to get these updates?
Please let me know and I would be happy to help you with this.
Thank and have a nice day!
I worked on behalf of HP.

Why is my recovery drive almost full and how do i clean it.

Also why is my hard drive almost full when i have very little on the computer?

My recovery is full too exept ive got windows 7.... I do have a lot of crap on my laptop though.....i dont know whats causing it ... im 12 so all i do is take photos and videos , play games on hp games , watch netflix and youtube , go on kids chat....Well, there was this one time where i was on the chat when my computor was hacked and i just turned it off then it was fine if it helps..... i actually have no idea....ive had my laptop for about two years now ...my laptop is hp and part of the pavilion g series.....its red ?it has intel core....i dunno if any of this helps but please help ....My parents will get really mad if i run out of memery

Hard drive is full, how to make iTunes span multiple hard drives?

My mp3 drive is full. How do I tell iTunes to use multiple hard drives? It seems to only want to deal with one.

Hi, Mister Beefy.
All you have to do is go to the iTunes Edit menu > Preferences > Advanced tab > General sub-tab and change the location of your iTunes Music folder.
New files added to your Library will go to the new location, old files will remain in the old location.

C drive is full how do I move iTunes to d drive?

How do I move iTunes from one drive to another? My c drive is full I changed my preferences to d, yet I still can not back up my iPhone or iPad. I think I need to move iTunes I am just not sure if I should uninstall from c and reinstall to d? Any suggestions or help.
Thank you
Sue

Copy the entire iTunes folder from your music folder to D:\iTunes.
Click the icon to start iTunes and immediately press and hold down the shift key. Keep holding until asked to choose or create a library.
Click Choose and navigate to the file D:\iTunes\iTunes Library.itl
Check the library is working properly.
Use the option File > Library > Organize Library > Consolidate Files to import any stay files to the new library folder.
Delete the old iTunes folder on the C: drive.
Ideally you will also backup this library to another drive.
tt2

HP Recovery drive deleted. How do i get it back?

i Have mistakenly deleted my recovery drive from windows 8.1 before down grading to windows 8. how do i get back the drive?
Someone should help me please.

Boot from Recovery Media to reset to Factory. If you did not make your Recovery Media-call HP Support in your area to order a set.
If you live in the US, contact HP Here.
If you live in another part of the world, start here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

When i turn on my mac it has a pop up that reads your startup drive is full how do i empty it

how do i empty my start up drive when it is full

Okay, try starting your Macbook Pro with the original DVD that came with the system. Then start disk utiltiy to repair your hard drive. If you hard drive is full you would need to open the terminal program and delete some files. That could be difficult if you don't know any Unix commands.

My external drive is full, how do I piggyback it with a new external hard drive?

My old external hard drive is full. How do I piggyback it with a new external hard drive? I am thinking of getting. 2tb western digital my studio for Mac.

Your iMac has four USB ports. If the new drive is also USB, just plug it into one of the unused ports.
Your machine also has a Firewire 800 port. If it is unused, you can connect a new external firewire drive to it.
Note - if you plan on using the new drive for booting (backup or emergency), such as by partitioning it and cloning your internal drive to one of the partitions on it, strongly suggest you go with a firewire drive.
In either case, firewire or USB, it's best to get a drive which has its own power supply.

HP Pavilion 15t-n200 (Windows 7 Professional 64-bit) -- Recovery Drive Almost Full

Hello, Everyone:
I just set up my new HP Pavilion 15t-n200 laptop (product number E9Z18AV) yesterday. Other than installing software for my HP Officejet Pro 8600 Premium printer and a free PDF Creator, I added no other software to the laptop. To my big surprise, the D drive (recovery drive) shows that I have used 22.5 GB, leaving only 2.4 GB free!
FYI, the specs for my laptop are:
Intel Core i5-4200U CPU @ 1.60GHz
12 GB system memory
1T hard drive (of which 856 GB is free)
I would appreciate any advice or guidance from forum members to resolve this issue.
Thank you.

That is how it is shipped. The D: drive is static. It is only used for making restore disks or restoring the system so there is no need to leave free space. The drive that is dynamic (i.e. stuff is being added) is the C:\ drive. You should have lots of space there.

My Recovery Drive is Full, How do I clean it up? (HP Pavilion dv7t-4100 CTO)

Similar Messages

Maybe you are looking for