My remote wont turn the appletv on even after changing battery and unplugging everything and plugging it back in

my remote wont turn my appletv on even after changing the battery

Nothing, the light didn't flash at all? If so you either have a dead remote or a dead Apple TV.
If you have a Mac you can try pairing the remote with it to test. Go to System Preferences->Security & Privacy and unlock the panel. Click the Advanced button and look for the Disable Remote Control Infrared   Receiver checkbox. Clear it and click the Pair button. If the remote is ok you should be able to pair it to the Mac.
If you can't pair the remote it most likely pints to a bad remote. If the Apple TV still won;t respond then you need to get the Apple TV looked at.
Good luck

Similar Messages

  • My macbook wont except my administrator name even after i reset my admin pasword and keychain login password so I am unable to install or make any account changes. Suggestions anyone? I've been at this for hours now....

    My macbook wont except my administrator name even after I reset my admin pasword and keychain login password so I am unable to install or make any account changes. I can't even install any software. Suggestions anyone? I've been at this for hours now....

    Try Resetting the PRAM

  • IPad Mini completely ran out of battery and now wont turn on at all, even after being on charge for a number of hours. What can I do?

    My iPad mini ran out of battery yesterday and now won't turn on at all. How do I resolve this?

    When the battery goes flat it can 15 to 20 minutes of charging to then be able to get a response from it, but if you've charged it for longer than that they it should have picked up some charge. Have you got a different charger or cable that you could try just in case there is a problem with either of those - an iPhone or iPod charger will work with the iPad, but as they are lower power will take longer.

  • My Pogo game does not fit the game window even after changing resolution pixel only on Firefox.

    In Pogo games my game is too large for the game window. I tried various pixel resolutions and game is still too large. Extending the window will not help.

    What site?

  • HT3176 my apple remote will not link to my appletv even after changing the battery

    my apple remote will not link to my appletv even after changing the battery.  can anyone help?

    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Was trying to upload a video through facebook then phone shutdown and wont turn on at all even if plugged

    for my iphone4 i was trying to upload a video through facebook then phone shutdown and wont turn on at all even if plugged

    Try resetting it:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

  • My ipod touch wont turn on at all even when i connect it to my computer

    So my ipod touch wont turn on at all even when i connect it to my computer! it was working fine then outta no where it wouldnt wanna turn back on. i tryed resetting but it doesn't do anything. Also when i put it on the charger it seems to get pretty hot...is the normal? help please...

    There are two different causes of this, either it has been overheated, or the iPod just crashed.  If it crashed, there is one simple step to fixing it.  Letting the battery die.  Do not connect to a charger port, or the device may get overheated, and need to be replaced.  Once it dies, it normally will show the icon, that is needs to be charged. Once you charge it back up, it should go back to normal.  If this doesn't help, then contact apple to the nearest store about getting a replacement.

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT204492 my apple remote wont control the volume?? any ideas??

    my apple remote wont control the volume in my itunes, any ideas??

    Not via the Mac. I just hooked up a TV to mine via HDMI and it shows the It comes up with the volume logo on the screen with a line through it, when I select audio output via HDMI. If you select another audio output like internal speaker yo can change volume.

  • Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

  • Changed (renamed) device name in Intune app on iOS device. This change is not showing up in the admin portal, even after 24 hours

    Hi,
    I am trying to update a mobile devices names.  Initially, I changed the iOS device name (Settings->General->About->Name) and then I also renamed the device in the Intune app on the device.  Neither of these changes are propagating through
    to the admin portal, even after 24 hours.  Is there anything else I should be doing for this to work?
    Thanks in advance for your help.
    Simon.

    I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine.  Is there some other place
    that we should be going to rename devices so they are more easily identifiable in the Intune console?
    Thanks!

  • Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

    Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

    What kind of repair?

  • The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

    the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

    Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

  • Can I set calender invite to set at the same time, even when changing time zone. for example I am in the UK have set a meeting for 10am in NYC for weds, but when getting to NYC it is still set at 10am and doen't adjust to time zone?

    Can I set my Calendar invites on a IOS 7 device to set at the same time, even when changing time zones. For example I am in the UK and need to set a meeting for 10am NYC time on Wednesday, but when I reach NYC I don't want the time zones to adjust which will then adjust my meeting I set in the UK to NYC time.

    Here are the individual files for those that fear the my other file of virii.
    Attachments:
    HASP.vi ‏88 KB
    File Setup.vi ‏11 KB
    Gather and Output.vi ‏149 KB

Maybe you are looking for

  • ManageCustomerQuoteIn Multiple Lines Issue

    The following document talks about the Service for importing Quotes... [Inbound Service ManageCustomerQuoteIn|https://www.sme.sap.com/irj/sme/go/portal/prtroot/docs/library/uuid/902baed6-ce7f-2f10-99b9-8940b2996dbe?QuickLink=solutions&54936926708668]

  • Photoshop CS5-64bit support for Epson Perfection V600 Scanner

    Hello - In this document -- http://kb2.adobe.com/cps/405/kb405072.html It says: "If the manufacturer of your scanner doesn't provide a 64-bit driver, open Photoshop CS5 in 32-bit mode to enable TWAIN scanning functionality with 32-bit drivers." Epson

  • Can't admin XserveRAID

    I have: Xserve G5, PowerPC G5 (3.0), 1x2 GHz, L2 Cache (per CPU):512 KB, memory 2.5 GB, Bus Speed: 1 GHz, Boot ROM Version: 5.1.7f1 And a full RAID, (sorry, I can't gather specific info on it). Everything is connected to both a FC switch, (QLogic 520

  • Uninstall and reinstall not available in download manager

    I bought Adobe cloud and installed Acrobat Pro. When I tried to run it there was a problem with the accept screen and it would not allow me to accept. I decided to uninstall it and intended to reinstall it hoping that it would be fixed. However, when

  • Paramform dynamic list can not show in browser

    In report builder I build two user parameter by Parameter Form builder. one is the search_mouth in which we type the month, the other is department_name which is selected by dynamic list and we can not type the name only select a name from the list.