My replied messages contain only HTML code apparently.

Hey guys! Pretty new to Thunderbird.
When I reply to people on my Thunderbird, the recipients are just receiving html code.
I'm using one account on 2 different computers for my eBay messages, how do I stop this?
Weird thing is, one of the accounts works fine and the other doesn't.
And I noticed when I reply on the one I've got a problem with, the field for me to type my reply is based down at the bottom, whereas the one that is fine, I have to type at the top (which I prefer anyway).
I didn't set either of them up, I used an IT technician, but he knew nothing about Mozilla and it took him ages. So I can't ask him, and I'm sure one of you geniuses can help me :) Plus if I did ask him, it would probably take him ages again.
One thing I could do is update the version and see what happens. If that works I'm sorry for wasting your time.
Any advice would be greatly appreciated.
Thanks very much,
Julian :)

Hey Gnospen thanks for your help, but I think you may have a slightly different version to me.
I had a look but couldn't find "auto detect" on my updated version. I have the most recent version apparently.
Kind Regards,
Julian

Similar Messages

Why do website forums keep telling me that my messages contain HTML, when they do not contain any HTML code at all?

I am hoping someone more intelligent than me, can help me out here, as I've got a really infuriating problem.
I tend to visit a lot of online forums, especially in recent days those at Sky (http://helpforum.sky.com/) and Vodafone (http://forum.vodafone.co.uk/)
Whenever I log in, and try and post a message, I keep getting a very annoying error message that says:
"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
The problem is, I never use ANY HTML code, as I don't know what it is. I do use spaces, capital letters, standard punctuation marks, and carriage returns/paragraph breaks. This problem doesn't manifest itself on Internet Explorer, nor Opera, nor Chrome.
So what's going on please?!

Please try the steps at [[Websites say that Firefox is outdated or incompatible even though it's the latest version]] before trying anything else, then update Firefox [[Update Firefox to the latest version]]

How to use h:message to display HTML code in message from property file

I am using <h:message for="somecomponentid"/> to display the error message for a validator attached to a component and the error message which resides in message property file contains HTML elements like <br> and
The HTML doesnt get displayed properly and the code <br> etc is displayed instead.
Is there a method to get h:message to display HTML elements correcly.
[I know there is an h:outputFormat which has an escape parameter to allow HTML to be rendered correcly but it has no for parameter to specify the component id whose validation error message I want to display]
eg.
<h:message for="somecomponentid"/>
to display from errormessages.properties
com.somecompany.thevalidationerrormessage=You have an error<br> Please click here to return to homepage

Hello Ivan,
Fortunately I have just recently found a solution to my problem by using code by a developer who had already had this problem in the past and who provided a patch on the Apache MyFaces jira site.
See following link for the solution I downloaded and then used :
http://issues.apache.org/jira/browse/MYFACES-155
I believe they are intending to eventually release this in a future release of MyFaces extensions on this site.
I used the escape attribute on the tag to allow 'escaped' html code in error messages to be used.
Hope it solves your problem too..
Suhel

Movies with iTunes Extras show only HTML code and not title screen when double clicked.

I only noticed this after some iTunes updates. Any movies that have iTunes Extras donot show the "Title Screen" when double clicked. They only show HTML script. I can still watch the movies, and can access the extras by going to the folder they are in, but thats a pain. I have purchased other movies with extras since encountering the problem and have the same issue. I run windows Vista on a 32-bit system. I have all updated drivers. I have searched the web for an answer but couldnt find anything. It is prob something insanely easy. Any help would be appriciated.
Example of text that appears when double clicking:
<!doctype html>
<html>
<head>
     <meta http-equiv="Content-type" content="text/html; charset=utf-8" />
     <meta name="hdtv-fullscreen" content="true" />
     <meta name="hdtv-cursor-off" content="true" />
     <title>Paul (Unrated) [2011]</title>
     
<script type="text/javascript" src="TuneKit/src/TuneKit.js" charset="utf-8"></script>
     
     <link rel="stylesheet" href="css/shared.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/home.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/chapters.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/features.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/more.css" type="text/css" media="screen" />
     
     <script type="text/javascript" src="controllers/data.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/home.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/chapters.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/features.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/more.js" charset="utf-8"></script>
</head>
<body>
     <div id="bleed">
          <div id="navigation">
               <img id="pic0" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
          <img id="pic1" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
               <img id="pic2" class="picBLANK" src="images/home/Paul_mm_background_02.jpg"/>
          <img id="pic3" class="picBLANK" src="images/home/Paul_mm_background_03.jpg" />
          <img id="pic4" class="picBLANK" src="images/home/Paul_mm_background_04.jpg" />
          <img id="pic5" class="picBLANK" src="images/home/Paul_mm_background_05.jpg" />
          <img id="pic6" class="picBLANK" src="images/home/Paul_mm_background_06.jpg" />
          <img id="pic7" class="picBLANK" src="images/home/Paul_mm_background_07.jpg" />
          <img id="pic8" class="picBLANK" src="images/home/Paul_mm_background_08.jpg" />
          <img id="pic9" class="picBLANK" src="images/home/Paul_mm_background_09.jpg" />
          <img id="pic10" class="picBLANK" src="images/home/Paul_mm_background_01.jpg" />
               <div id="vid" class="vid_bg">
                    </div>
          </div>
     </div>
</body>
</html>

The fix from this other post worked for me.
https://discussions.apple.com/message/17691332#17691332
FIX:
Go into "Get Info" and set the Album name to the name of the movie for both the movie and the "Extra". This will fix it.

BEA 9.2 Portal issue: downloaded CSV file contains embedded html code

We have J2EE application using BEA 9.2 Portal framework, and one of the page has feature to generate report( in pop up window) in CSV file format. As per the history from previous developer, BEA 8.1 didn't have this issue but, after mirgration to 9.2, they started having file download error( incomplete contents ..). To overcome this issue they commented out setting content length to HttpServletResponse as attached below, but this, now, causes html page source code of the parent page( where submit button is clicked to generate csv file report) being rendered along with actual report in the downloaded CSV file. Has anyone have this sort of issue? If so, can you please share your thoughts? or any thoughts in general?
BEA 9.2 with Portal framework, JDK 15, JSP, Beehive NetUI, Sun Microsystem Solaris server
Here is the source code that avoids setting content length and reasoning behind it..
private static void setResponseHeadersForCSVFile(HttpServletResponse response, String filename, int contentLength)
String mimeType = mimeTypes.getContentType(filename);
response.reset();
response.setContentType(mimeType);
// DON'T explicitly set the content length, since the length of the String or StringBuffer that contains
// the contents of the CSV file will be character encoded when it is actually written to the output stream, based
// upon the character encoding of this JVM App Server's settings. So let the JVM App Server framework apply the character
// encoding AND set the final and truly correct content length header at the time the contents of the String or StringBuffer are truly
// streamed back to the user.
//response.setContentLength(contentLength);
response.addHeader("Content-Disposition", "attachment; filename=\"" + filename + "\"; size=" + contentLength);
}

1) Yes, the old content.tld is available as part of a web library module as a taglib.tld file. The module is: wlp-services-web-lib.war, which can be found in your bea/weblogic92/portal/lib/modules directory.
2) The new API is accessible from the ContentManagerFactory class. This provides access to INodeManager, ITypeManager, ISearchManager, etc. The new API is contained within the com.bea.content.federated package. The 8.1.x API in the com.bea.content.manager package including RepositoryManager, NodeOps, SearchOps, etc. has been deprecated with 9.2.
3) Yes, via the new I*Manager implementations. The entitlement support is for application-scoped visitor roles. Make sure you're using the ISearchManager when performing search operations. This will ensure secure results are returned.

Gmail and youtube don't recognize the newest version of browser and the content is badly displayed, like only html code

I tried to download latest version multiple times but it didn't help. I have firefox 9.0.1 and when I click: Help -> about firefox there's written that it's up to date. I came across a problem also while posting a message on one of forums: Gamedev.net. I couldn't check the message window in order to type anything. Hwo can I solve these problems?

Your Firefox User Agent is telling websites that you are using Firefox 3.0. <br />
Mozilla/5.0 (Windows; U; Windows NT 5.0; rv:1.8.1) Gecko/20061010 '''Firefox/3.0'''
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox

Console.app - All Messages contains only one day

Hi everyone,
My problem is the following: When I start Console.app the range of Messages displayed is: 2013-03-13 14:29:10 to 2013-03-13 22:24:07. So there are 4000 Entries from last month from exactly one day. All other logs are working perfectly the way they schuld but this one seems to be messed up.
What can I do to fix this?

Did some more "research": I just ran "syslog" in terminal.
This is the last message:
Mar 19 22:24:03 Martins-MacBook-Pro.local iTunes[471] <Notice>: 2013-03-19 10:24:03.917460 PM [AVSystemController] Stopping AirPlay
So it looks like syslog is causing the problem because Cosole.app is taking it's data from there....

The call stack contains only external code

Suddenly my project has gone into a non-working state and it seems impossible to debug it. The last time this happened was related to a variable declared in a module that referenced a file location. This time I have no idea what is going on. I took a screenshot
of the error, in hopes someone can help.
I'm using Visual Basic Express 2012
Programming is mostly just a hobby for me :)

"Are you using default form instances?"
I have no idea what that means.
Programming is mostly just a hobby for me :)

Some Mail messages show html code

I am using Mail 6.2 and Gmail IMAP. Some Mail that I move from my Inbox to another Mail folder part of the message appears in html code in the folder where I moved the message. The html code did not appera while the message was in my In Box. If I look at the message in Gmail, no html code appears and the message has the same lable as the Mail folder where I moved the message. If i look at the message on my iPad there is no html code. The problem only appears to happen within Apple Mail

By the way, also, the html code is interpreted correctly by the html tester on the following web site:
http://www.webtutorialplus.com/html-code-tester.aspx
So it seems that perhaps a simple edit should make it compatible with Mail App.
I have verified that all uninterpreted messages where all I see is html raw code, are interpreted and rendered beautifully by the tool at the link above. All I need do is to coy and paste the body of the message. So it seems that what is missing is something to trigger the interpretation in Mail App. Right?

Possible for Acrobat XI to compile html code to create hyperlinks out of "regular" words?

Hi,
I've downloaded Acrobat 11, which I used to convert to pdf a Mac Word 2011 document that contains some html code like this:
<a href="http://www.adobe.com">Adobe's website</a>
I want the html code to be "compiled" and clickable so that when one clicks on the words "Adobe's website," one is connected to the website.
Is this possible to do in Acrobat XI? I have dozens of such examples throughout my document, so I would prefer an automated method. I did try to use the "Add or edit link" function in Tools, but that's not an automated method, and I was confused about how to properly use it, since it wanted me to draw a box.
thanks for any advice you may have

To make an Adobe quality PDF on a Mac
Create document
Save document in orginal format (as a backup file or if you need to do edits)
Go to Print Menu
Click on and hold down PDF Button (on the menu)
when Context menu pops up choose Adobe PDF (or Adobe quality PDF depending upon OS)
the first set of instructions set quaility of Document (works similar to Distiller). I usually use the setting that comes up which is High Quality.
The second ite that comes up is name if with Word it will be formatted as Microsoft-Filename.docx.pdf you can rename as Filename.pdf
after renaming, browse to desired save location
Choose Save
The file will Process. You can set open in Acrobat or Reader. I don't.
You can in Word go to Save As.... and chose PDF
or go to Print menu and click release real the PDF button very fast.
Both of these Options use Apple's PDF engine which has a ton of flaws.
Using the Adobe Quality PDF option actually uses Acrobat's PDF engine not Apple's
For this to work Acrobat must be installed. The components for this to work have been install since Mac version 8 of Acrobat. And work on Snow Leopard (OSX.6.8) and above.

Using webmail in Mozilla Firefox 17.0.1 on Windows 8, original messages get turned into html code when I reply to or forward them. How can I fix this?

I have tried re-setting Firefox and working in Safe Mode, but the problem still recurs. I use Fastmail as my webmail server and never had this problem on Windows XP or Windows 7. When I reply to a message, the original message is turned into html code. The same happens when I forward a message.
My JavaScript is up to date, in case that's relevant. The Fastmail support team suggested the problem would be Firefox-related.
The other function of my Fastmail account that isn't working properly in Firefox 17.0.1. is the search function.
Do I need to get new plugins or something? I don't know where the HTML editor is in Firefox or if that's what's wrong.
Regards,
Rachel

Thanks for your reply, cor-el. Norton 360 came pre-installed on the laptop as part of the package I bought. I haven't changed the pre-set firewall or anti-virus settings. Should I change something?
I will try rebooting in Windows Safe mode as you say and report if that makes any difference.
Rachel

Hub transport raw HTML code displays when iOS client used to send message

Has anyone else encountered (and hopefully fixed) this problem? I use HTML coding to format the signatures for my staff at the hub transport rule level. Here's an example:
<br><p style='font-size:12pt; font-family:"Arial","sans-serif"'><b>%%CustomAttribute1%%</b><br>
%%Title%%<br>
Tel:   %%PhoneNumber%%<br>
Fax:  %%FaxNumber%%<br>
%%Email%%<br><br>
<img border=0 width="240" height="62" src="http://wiglefamily.net/CABVI/CABVILogo.jpg" alt="CABVI Logo"><br>
               <a href="www.cincyblind.org">www.cincyblind.org</a></p>
<p style='font-size:8pt;font-family:"Arial","sans-serif"'>Disclaimer: The information contained in this electronic mail message may be confidential and protected information intended only for the use of the individual or entity
named above. As the recipient of this information you may be prohibited by State and Federal law from disclosing this information to any other party without specific written authorization from the individual to whom it pertains. If you have received
this communication in error, please notify us immediately and destroy the message and its attachments. </p>
It looks great when I sent from Outlook or even Android mail clients. However, when sent from iOS mail clients I get the following in the signature:
<html>
<body>
Michael Wigle IT Manager Tel: 513-487-4243 Fax: 513-221-2995
[email protected] [CABVI Logo] www.cincyblind.org Disclaimer: The information contained in this electronic mail message may be confidential and protected information intended only for the use of the
individual or entity named above. As the recipient of this information you may be prohibited by State and Federal law from disclosing this information to any other party without specific written authorization from the individual to whom it pertains.
If you have received this communication in error, please notify us immediately and destroy the message and its attachments.
</body>
</html>
As you can see, the raw HTML code shows but the AD variables populate correctly. Any ideas on a solution for this problem?

See this for the pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125198(v=exchg.80).aspx
There's a link in that article that takes you to:
http://technet.microsoft.com/en-us/library/bb125018(v=exchg.80).aspx
FYI, I think you're still a bit confused. Once again you said *from* when you meant *to*! :-)
--- Rich Matheisen MCSE&I, Exchange MVP

This html code only plays midi file in IE, not Safari - why?

<html>
<title>New York</title>
<bgsound src="http://home.earthlink.net/~maugustine2/daydream/bachair.mid" loop="0">
<body bgcolor="#CCCC98">
</html>
With this code, the midi file: bachair.mid will only play with IE 5.2/mac, not Safari 2.0.1 / 10.4.2
Safari will play the midi file with a direct link: http://home.earthlink.net/~maugustine2/daydream/bachair.mid - so it's not a problem with safari midi functions, only this code.
The page containing this code is at: http://home.earthlink.net/~maugustine2/daydream/DDhead.htm
Again - IE 5.2/mac plays the midi file with this code and Safari doesn't. Any help is very appreciated! I'm sure it's something very simple.
Mark

Thanks for the hint, I found this code - both lines will play the file in Safari - but they also make IE play the file twice! (with an echo). Safari seems to need both to play anything - IE plays it with either one! Any further ideas much appreciated! btw - I am >not< using this to play music on a home page - only a specific goofy little subpage - shouldn't be bothersome for anyone!
bgsound src="http://home.earthlink.net/~maugustine2/daydream/bachair.mid"
embed src="http://home.earthlink.net/~maugustine2/daydream/bachair.mid" hidden="TRUE" autostart="TRUE" loop="0"
/embed

Receive HTML code in message, how to convert?

Usually I can read all my mail (text or HTML), yet one correspondent sent me a message
containing HTML code. here it is:
<!DOCTYPE html>
<html>
<body>
<table border=1><tr><td width=100><b>Date</b></td><td
width=300><b>Description</b></td><td width=100><b>Amount</b></td></tr>
<tr><td>05/30/2014</td><td>Velocity</td><td align=right>16.01</td><tr>
<tr><td>06/01/2014</td><td>Member Dues</td><td align=right>227.00</td><tr>
<tr><td>06/01/2014</td><td>Payment - EFT</td><td
align=right>-243.01</td><tr>
I used a conversion program by Mail Chimp and, indeed, the lines converted
into a table with three columns and four lines.
Can I make Thunderbird to do the conversion before displaying the message?

Thanks Zenos, I still have the complete message. I had saved it in one of the mail folders. Again, I was surprised, the HTML code was properly converted in the saved version: the table was shown wiith all borders, the values with currency symbols etc.
I then forwarded the saved version of the message to myself. In the inbox
the message showed up with an incomplete conversion: no borders of the table, the columns not lined up .
Then I saved the message again from the inbox to the mail folder. This time it has been saved as is, i.e. no borders and misalignment.
The original message contains no private information except my e-mail address, the other identifiers are all public address elements of our health club.
If it would help to identify what may be wrong with theThunderbird Inbox processing, that it ignores HTML code and if you would be so kind as to pusue the issue, I will send you the saved version of the message.
Just give me an address.

While in Edit Mode in Moodle - page content does not render at all, but I am able to display the underlying HTML code. Happens only after upgrade to Firefox 11.0.

While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

My replied messages contain only HTML code apparently.

Similar Messages

Maybe you are looking for