My report is printing half of the page when I print the report Hp psc 1315

My report is printing half of the page when I print the report in this printer
Hp psc 1315 all in-one and when the operating system is windows xp , but when
I run the same report in windows me , and the same printer it is running well
And my report version is :
Report Builder 6.0.8.23.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.20.0
waiting for your valuable answer .
Best regards
Jamil alshaibani

i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
please help
betst regards
jamil alshaibani

Similar Messages

  • In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it

    In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it.
    For example you could see the whole month, the day you select was highlighted and at the bottom of the page listed any activities.
    Now this does not happen. Am I missing something?
    The Calender seems to have gone backwards!!!
    HELP!!!
    PLEASE!!!!

    Ditto!  I have always preferred the month as the default view and the list at the page bottom let me know what I need to pay attention to for today (or tomorrow, or any future date).  Having to scoll through every hour of the day to find items that may or not be there is a huge waste of time!
    I hate this calendar!!!!  I've been okay with other changes in ios7 but they need to make changes.  How about letting us configure our own calendar views?  Choose "home" page look by month or week, itemize daily view by hour or by items entered, etc.

  • Firefox was a good, but now it's slow and when I search google I have to refresh the page when I click the back button. This is driving me to other browsers.

    When searching in goole, If I click on a link and want to go back a page firefox does not load the previous google search without refreshing the page. Because I use google frequently this is very annoying. Firefox has also been freezing and crashing most frequently of any of the other browsers that I have been driven to use. I'm not sure why I should keep it on my computer at this point.

    Regarding the Google results page blanking out when you go back, this occurs when using a combination of three settings, which may be fairly common:
    * Zoom level higher than two steps (120%; the newest versions of Windows apparently default to 125%, which Firefox detects and adopts)
    * Google search set to instant prediction results (default on Google search, but can be disabled in Search settings, see [https://support.google.com/websearch/answer/186610 Google Instant Search Help])
    * Opening results in the same tab, then using the Back button to return to the results page (default on Google search, but can be changed in Search settings to open results in a new window/tab, see [https://support.google.com/websearch/answer/425 Google Search Help])
    Firefox's cache feature attempts to maximize speed for forward and back actions by storing the last rendering of the page. Something about the instant prediction results ''with zoom'' is causing Firefox to briefly display the results and then they blank out and you have to reload the page to get them back. The mystery is why this only occurs (so far as I have heard) on Google? Is one of Google's scripts blanking out the page? Does Google care that it's messing up Firefox users?
    For now, if you do not want to or cannot change any one of the three factors needed to experience this problem, you can disable the storage of the last rendering of the page. Then Firefox will skip the shortcut and lay it out fresh, which is known to work. As noted in earlier posts, you make this change using the about:config preferences editor.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered.
    (3) Double-click the '''browser.sessionhistory.max_total_viewers''' preference and change it to 0 (that's a zero).
    This thread has a lengthy discussion: [https://support.mozilla.org/en-US/questions/970863 When I go back to Google search results page, it takes me to a blank Google screen].

  • Will the web address show up on the bottom of the page when I print my forms?

    I am still in preview mode, and am not ready to go live yet with my forms, but will be soon.  But when I am testing the forms and I print them, the web address prints on the bottom of the page.  Will this continue to happen when my forms are live and found on my website, or will a web address always show up on the bottom of the form when it is being printed?  We keep a lot of our forms in paper copy for records and it looks sloppy with that on the printed version.

    The browser puts that there, not us. Check your print setup options.
    You can also save out the form as PDF and print that.
    Randy

  • Why do i get vertical streaks on the page when i print with my laserjet 1536?

    i have hp paper, replaced the cartridge, replaced the printer, cleaned the paper path, and still have the problem

    the glass strip on the left of the glass might need cleaning.

  • How can I stop Address Book (Lion) from printing an extra blank page when I print an envelope

    Whenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?

    HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
    Solution: Select a #9  envelop.  This prints about the same size and does not have an extra envelop.
    How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
    Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
    Over the years I have called HP and they couldn't solve the problem.
    I have told Apple today when I figures out the workaround.

  • Safari reloads the page when I move the pointer?

    Currently running 10.6.8 with Safari 5.1.7 on my 1.83 Macbook Pro...
    Several weeks ago I noticed an odd bit of behavior from Safari. If I click the back button (or hot-key back one page), and then move the pointer using my trackpad, the displayed page reloads. It doesn't reload the page if I use two fingers to drag the page up or down, it only does it if I touch the pad with one finger.
    I have shut off all my extensions, so what could be causing this?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Why can't I just press ENTER to go to the page when I have the complete URL typed into the address bar?

    I dunno; maybe I'm just crazy, but I'd swear that before I downloaded FF4, I used to be able to (1) type in a complete URL, or (2) type a partial URL or keyword and choose what I wanted from a drop-down of recent URLs, then hit ENTER to be taken to the page I was looking for--all in the address bar, without having to use my mouse to click the little curly arrow at the right end of the address bar (next to the "favorite" star).

    BINGO! SOLVED IT!! It was that rotten AVG safe search. Bravo, and thank you, TonyE! (I often suspect I'm losing my marbles; glad to know that this time it was a false alarm;)

  • Firefox scrolls to the bottom of the page when I press the down arrow, instead of moving through the text.

    When I press the down arrow on Firefox, it scrolls to the bottom of the screen. I'm almost always just trying to move the vertical scroll bar down one or two picas (or however you measure it). This didn't used to happen until about 2009. Any suggested fixes?
    == This happened ==
    Every time Firefox opened
    == 2009

    Did you try hitting the '''F7''' key?

  • Prints only a few pages when I print duplex.

    I'm on a Apple MacBookPro running Mac OS X 10.7.5 using Adobe Reader 11.0.2, current as of 01-March-2013, and I noticed that I'm having problems printing duplex with an Toshiba eStudio 351c copier. I have a 50 page document that I want to print duplex but I only get three pages before it stops. I print the same document using Apple Preview and I could print all 50 pages duplex no problem. I have tried this with three different systems; Mac Pro ruuning 10.7.5, MacBookPro 10.6.8; all these are Adobe Reader 11.0.2 with different Toshiba print drivers and they both only print three before it stop so my thinking it has to do something with Adobe Reader 11.0.2.
    I tested duplex Adobe Reader 10.1.6 and 9.5.4 on Mac OS 10.6.8 and it had no problems with duplex printing.
    Does anyone else experience this issue with printing duplex with Adobe Reader 11.0.2 on Apple Mac OS X 10.6/7 and is there way to fix or will Adobe fix this possible issue?
    Thank you in advanced.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • If i have to close Firefox after attempting to load a page locks the machine up, what setting can i change where it will not automatically try to reload the page when i restard the browser?

    Say i try to open a pdf link for example (although not limited to) and Firefox stops responding; if i close the browser and open it again, it will attempt to reload the same page that just locked it up. How do i turn this off? I get the "Well, this is embarrassing." error fairly often (after 'end task'-ing twice) :/
    == This happened ==
    A few times a week

    What page crashes Firefox? On the "Well, this is embarrassing." page you could choose to restore all pages except for this "bad" one.
    If I knew what page it is, maybe, I could help more.
    You can also
    Help->Report Broken Website...
    Besides, you can also update Java.
    If the problem is caused by JavaScript, you could install [https://addons.mozilla.org/en-US/firefox/addon/722 NoScript].
    <u></u><u></u><u></u><u></u><u></u>
    To change what pages are opened on each start-up/restart (whether a crash occurred or not), you can go to
    Tools->Options->General->Homepage->You can change which page to use on start-up.

  • Fast dial does not work, firefox 6.0. Will not bring up the page when I click the icon necxt to address bar.

    Before I updated firefox (the time before I updated to 6.0)
    I had fast dial and it worked perfectly fine.
    Then it just would not work at all. Clicking the icon up next to my address bar- nothing. Even tried adding pages to fast dial by right clicking but still the icon does nothing.
    I used speed dial for a while but really do not like it. Disabled fast dial, removed it, added it again, removed speed dial. Nothing :(

    see https://support.mozilla.com/questions/885622

  • OfficeJet 8500A. Single print job prints half on two pages.

    I have an OfficeJet 8500A Premium for about a year now. All was working well, until recently.
    I'm using Firmware Version: LRP1FN1126AR
    Now, when I send a print job that's supposed to be on a single page, it prints half on two pages. This, of course, wastes my ink, paper, time, energy, and sanity. I've searched around and can't find a resolution to this problem.
    I posted a picture of the problem I'm experiencing, personal info areas blurred out. The only way to fix this, which is a temporary fix, is to turn the printer on and off. That seems to correct the problem, but only for a short while, since it will eventually start printing single print jobs split on two pages.
    Please help. Thanks.

    It sounds like the driver for the printer and the driver for the IE9 are having a conflict. I would advise trying to open the same page in a different web browser to see if the problem follows multiple browsers, or only IE9.
    Also, I would try reverting back to IE8 as a possible workaround. If none of these are able to get the printouts desired, then I would look at Shane_R's thread on using an alternate driver located here.
    Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Change the Page Title for all the pages when viewing the Reports in Bi Publisher

    Hello ,
    I have a requirement for changing the Page Title for all the report displayed pages on the browser window.

    As far as I know, answer is NO.
    it's very simple answer  Manikandan-S-Oracle
    for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
    "one place or option for changing" does not exist imho ( may be i'm wrong )
    so you can change places for your needs but not sure what it's adequate
    as example
    ...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp  -->  find <title>
    it changes title in http://somehost:7001/xmlpserver/servlet/catalog
    ... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp  -->  find <title>
    it changes title in http://somehost:7001/xmlpserver/servlet/home

  • I am doing a book.  Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

    I am doing a book.  Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

    No
    All photos frames must contain photos or you can not order the book
    LN

Maybe you are looking for

  • TS1363 my computer will not recognize my iphone

    My iphone has been working fine with my computer.  After I did an update for itunes today, the phone froze up  and will not work at all.  It has a picture stating to connect it to itunes, which it is.  The itunes will not recognize the iphone now. he

  • [BUG?] af:table table empty after descending sort and remove

    Hi, I think i found a bug. I have an af:table binded to an arraylist in a backingbean. This List consist of an object that represents two strings (value 1 and 2). Now when the table is loaded and I sort descending on one of the columns. After sorting

  • Printing scripi on both side  of paper

    Hi All, I want to print script on both side of paper. my observations. the output device they are using it prints report on both side of paper. in script , processing mode selected D  and i am printing dunning letters. in main program used NEW-PAGE.

  • Writing on PDF files

    I have three spreadsheets sent to me in PDF format. Unfortunately, although I can see them, I cannot write on them. Is there an easy fix or just a fix?

  • Creating a New Report Project Crashes

    Hello, I've just downloaded the release of CR for VS2010 and installed it correctly. But when i try to create a new report in a new solution (i use emty project ) and then try to add with the database expert databases it freeze the vs2010 with no tim