My retina Display stop working external hdmi connection works

While watching today apple keynote. At the and i realized that my retina display is totally black. Mirror display through hdmi is ok, apple logo on back side of disply is not lighting. Any help?

Hello Svoskar
Check out the article below to troubleshoot issues with no video when extending the desktop. Try resetting the NVRAM to change the resolution of the display back to its defaults and may show up again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
-Norm G.

Similar Messages

The Logic Board of my MacBook Pro Retina Display stopped working.

I purchased my MacBook Pro Retina Display 13 months ago. Barring a few errors the computer functioned beautifully, and I maintained it with the care it deserved. On Wednesday, last week, the laptop ceased to work completely. It wouldn't start, or charge. On submitting it for repair, I was informed that the logic board failed. Since its warranty lapsed a month ago, $1050 is required for its replacement. That outrageous amount is more than half of what I paid initially for the laptop. The service provider would not agree to any concession, or plea.
For an Apple enthusiast, it is very disheartening to learn that its foremost product stops operating in this manner. I am a high school senior, who has accustomed himself to his computer, and cannot at this time purchase a new laptop, let alone a Windows laptop. With college admission deadlines fast approaching, I solicit your help and suggestions, very desparately.

As much as it will suck to hear this answer, there really is no solution. Because the computer is now out of warranty, you have to pay the full $1050 to get the logic board replaced. I know this is a large sum of money, but you have to remember that the logic board includes the CPU, Graphics Card and RAM, all soldered onto the board. You're paying to replace all of the most expensive components of your computer, even if only one of them failed.
So, long story short, you'll have to either pay to replace the logic board, because it's out of warranty, or buy a new computer.

17" MacBook Pro Display stopped working

Hello,
I have a 17" 2.6GHz Intel Core 2 Duo MacBook Pro (purchased January 2008) and the display stopped working today. There is no light behind the Apple logo on the back or the display. The little white light by the latch works as normal, and I can hear the disk spin up when I power it off and on using the power button.
When I connect to an external monitor, there is no signal. When the machine is powered on, I can see the drive on the network. I have also tried booting up using an install CD as well, but no luck.
Yesterday, I updated all my software applications and did all the Apple software updates, everything worked fine. I am still on Snow Leopard, version 10.6.8.
Any suggestions? Is it toast?

Went to the Genius Bar yesterday. It's part of the NVIDIA issue.
http://support.apple.com/kb/TS2377
They had the part in stock should be able to repair it in 1-3 days.

HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hp Pavilion dv6 Notebook , Driver display stopped working and has recovered

Hi, I have a problem with my driver display....
I installed the Autocad program , and after 2 weeks, every time that I open the Autocad, after 4 or maybe 5 min. the screen goes black and after that a note shows up saying: Driver display stopped working and has recovered. I Try to update everything using the Hp support assistance and still i have the same issue. I don't know much about the computer and the driver so I will appreciate if somebody give me a solution. Thank you!!!

Hello @youleeus,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the driver display has stopped working, that it has recovered, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista. This should help prevent the GPU on your computer from timing out.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

23" studio display stopped working

My 23" studio display stopped working with my mac pro but works with MBP.
It started by not waking up everytime my Mac Pro went to sleep, but if I unplugged it and plugged it all back it and restarted it would come on however now the screen will not even come on. The power light is on and when I plug it into my MBP it works fine.
I'm not exactly a tech whiz but could it be the graphics card? Which is currently - ATI Radeon X1900 XT 512MB
It's out of warranty so before I trek down to the Apple store I thought I'd see if I can fix it myself.
Any help would be appreciated thanks!

Same for me, after having installed SL and allowing the computer to go to sleep. When trying to wake it up, the computer boots (at least it sounds so), but the display stays black. If in system prefs/energysaving/ I set the computer to "never sleep" but allow the screen to go asleep it works OK. As soon as the computer goes to rest it is impossible to get the screen working again, have to do a physical reboot. Works fine then......., but I really would like to use the energy savings prefs!
I've looked into other threads of similar topics, did not find any clues. Judging by the number of threads, this is a well-known issue, waiting for to be answered by Apple.
Suggestions?

Is there a way to connect 1 external thunderbolt display and 1 external HDMI display to a mid 2012 MBP (non-retina display)?

I've had a 24" Asus HDMI montitor for a while, and just got a 27" Apple thunderbolt display. I was wondering if there was a way to connect both of these to my mid-2012 Macbook Pro (non-retina). I know you can daisy-chain 2 thunderbolt displays, so I tried plugging my Asus into the thunderbolt display (using an HDMI to mini-display port adapter) and it didn't work. Suggestions??

Mini DisplayPort displays and adapters don't work directly with a Thunderbolt display, but will if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort device.

External monitor display stopped working

I was on 10.9.2, and from one day to the other, the HDMI connection did not worked any more. My external 27" Samsung remained black. I thought it might come from the HDMI slot on my MacBook Pro Retina (15, early 2013).
I bought a Mini Display port to VGA, did not worked, I tried on other display, don't work, I rest the Pram etc, nothing... I upgrade to 10.9.3. No change.
The display preference Panel does not recognize any thing else than the Retina dsplay... any other display connected is not seen.
I checked the hardwre : diagnostics says everything is alright.
Any idea what the problem is ?
Thanks

According to Apple technician, it's probably a hardware problem... everything else works fine. But for me it is just impossible to work without a larger display.
My MacBook Pro (Retina!) was purchased 1 and a half year ago. The only choice now seems to be to buy a new mainboard. I paid 1500 euro for the laptop, the repairs will cost +/- 1000 euro. Just for a problem connecting an external display.
How can I explain it : it really, really make me furious. More than 20 years along with macs... and so many bad experiences of this kind these last years.
Apple should stop selling computers and stick to smartphones only.
Alright, I will buy next a windows based computer. Oh ! all my professionnal soft are for Mac, I will have to buy them all again...
Traped.
Unsatisfied old customer... who cares ? Nobody.

Imac - external display stopped working

Hi All,
My imac has developed a problem overnight. I usually have the imac connected to an external display via the mini-DVI connection and everything worked fine. (to DVI --> HDMI --> Pioneer Plasma).
However today the imac could not be awoken from sleep. Restarting gets to the desktop screen but then goes gray screen. After much troubleshooting, I have isolated the problem to the mini DVI port. The computer will not complete booting up if the mini dvi port is connected. Just in case it was a problem with the mini-dvi to dvi adaptor, I tested it with a mini dvi to vga adaptor. Exactly the same problem with the booting sequence (gray screen as it gets to the desktop image stage). Without the mini DVI port in use, the imac boots up fine.
Could somebody please give me some suggestions re any further troubleshooting procedures I could try to fix the problem, or does it sound like a videocard hardware problem? Thanks for any thoughts.

Welcome to Apple Support Communities
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.

External Display Stopped Working

I've been using an external Dell 19" monitor with my beloved and faithful Macbook Pro for years. All of a sudden, I was unable to select the propert setting for the external monitor. Two days later the monitor stopped working altogether when plugged into the Mac. The Mac screen acts like the other monitor is working, but there's nothing on the external screen. The Dell monitor tries repeatedly to turn on, but the power button repeatedly changed from amber to blue while saying it's entering power save mode and never turns on. I've tried changing screen savers as recommended on another forum to no avail. I also ordered a new mini-DVI to AVG connector in the hopes that is the issue. I've confirmed that the Dell monitor still works fine by connecting it to my old PC, so that's not the issue. Any advice is appreciated. I read copy for a living and really need the larger display. Thanks!
Daniell

Welcome to Apple Support Communities
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.

Upgraded to Yosemite and Windows 8.1 Pro in Bootcamp, can no longer drive retina display and two external monitors simultaneously?

Greetings
I just upgraded from Mountain Lion and Windows 7 Ultimate (Bootcamp) to Yosemite and Windows 8.1 Pro on a late 2012 MBP 13" Retina. Prior to the upgrades, I was able to drive the retina panel and two external monitors simultaneously when operating directly in Bootcamp. Now, I can only drive 2 of the 3 simultaneously though all three are recognized under Graphic Properties. I simply cannot find any option or profile under Graphics Properties or Options or Personalization to run all three screens.
My hardware hasn't changed and this worked prior to the updates. I have no issue on the Mac OSX can run all three. I also have no issue doing it in Windows under Parallels Desktop 10. It is just when I boot directly into Bootcamp that this happens. What am I missing?
Thanks,
G.

Great point, Loner T. It was late when I was working and I thought about this afterwards also.
The issue was that in Windows=>Control Panel=>Display, under "Change Display Settings", the three screens showed but "Extend Display" was not selected for one of the screens. It was simply off. I can't believe I danced around this w/o picking it up sooner. In fact, it has happened in the past that for some reason a display loses this setting.
As an aside, thanks again for all of your help and terrific input to upgrade both the Mac and Windows operating systems. As I was going from Windows 7 Ultimate to Windows 8.1 Pro, one thing I did come across that made life much easier was to upgrade first to Windows 8 so I could keep my apps. The jump from 7 to 8.1 would otherwise migrate my personal files, but not programs and require a lot of time to reinstall all. This was completely avoided by going to Windows 8 first.
Thanks, again, and very much appreciate the work that you do here.
Best,
G.

Display stopped working on Satellite A300

Hi Guys,
I have satellite a300 PSAg4a-02500m laptop. All of a sudden the display has stopped working on the laptop. I tried plugging an external display but that is also not working.
I cannot even see the bios screen. The laptops normally, I don't hear any beeps while booting, just the fact that there is no display.
This laptop has a ATI M86 512MB graphics card. Its out of warranty.
Has any had similar experience. Is there any way to find out what the problem might be.
Any suggestions would be helpful.
Thanks

Hi Tama
Im afraid there is an serious hardware problem with your notebook.
I looks like the graphic card problem.
Usually if the internal display would be faulty, you should see everything on the external display. Therefore I think you GPU is affected.

Retina macbook log out with HDMI Connection

My macbook pro with retina display has a HDMI port, as most people know, however, every time I connect a display with HDMI, i get logged out, with my session completely lost. Any ideas?
I'm running OSX 10.8.2

I'm having the exact same issue with my retina display Macbook as well. Anyone found a solution yet? Very annoying when it kills my whole session!

IPad 4 Retina Display not working

Hi,
Trying to fix my daughters ipad4 as the display suddenly stopped working properly last night. At first taking off the magnetic screen cover sorted the issue, today that makes no difference...all you can see now is a pattern of wavy lines across the screen. Tried to do a reset with the home and standby buttons but I still get the wavy lines instead of the apple logo, then it goes blank after a few seconds.
Any ideas gratefully accepted, its outside the one year warranty period

I'm having the same problem on the iPad Air Wifi 32GB, sometimes it works, sometimes it doesn't. It worked perfectly on ios7 so hopefully the next update will fix it.

My ipod display stopped working

My iPod got a little wet, not bad, but now the display has stopped working. In iTunes, everything else is working, and I can turn it on and off using the buttons, etc. But no display... Argghhhh. Am I up the river?
thanks,
-Harry

If the iPod is dry
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
-If you still have the problem that indicates that the water damaged the iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing

My retina Display stop working external hdmi connection works

Similar Messages

Maybe you are looking for