My Right Speaker crackles... please help!!

Ok about a week ago my right speak started making a horrible crackling noise and i was unable to play any sound out of that speaker!!! it still happens, although some sounds comes through the speaker stil randomly crackles at any time, even if volume is muted!! if i take the power cord out however it does stop! has anyone experienced this problem? my ibook is still under repair warrantly, will they fix it? is it a fault or something iv done?
thanks
Carz

It should be repaired under warranty. Apple warranty covers all hardware faults apart from those caused by accidental damage or abuse. I would suggest you need a new top case (as speakers are part of this).

Similar Messages

Nokia N93 Speaker Problem Please help!

Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.

29-Mar-2008 09:06 PM
bigboy_245 wrote:
Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.
Which firmware version you have. To check type*#0000#
If my post has helped you please click the white star on the right

HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Hi. My ex girlfriend used her apple id and icloud to register my iphone. and now i want to sell my phone to someone but i cant reset all the contents and password because i dont know her password. we dont have anymore communication right now. please help

Hi. My ex girlfriend used her apple id and icloud to register my iphone. and now i want to sell my phone to someone but i cant reset all the contents and password because i dont know my ex password. we dont have anymore communication right now. please help. thnx

No one here can help you, nor can/will Apple. Unless you can get that info, you won't be able to restore the phone, to sell it, or re-activate it.
You need to somehow get back in touch with your girlfriend & obtain this info, or all you'll own is a paperweight.

G6 - 1201tx : right speaker crackling

my model is g6 - 1201tx with windows 7. my right speaker is suddenly giving an annoying crackling sound if i increase the system sound even above 30. plz help

Have you tried a driver update from your support page?
http://h10025.www1.hp.com/ewfrf/wc/product?product=5093402&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

My iPod video is not working right...please help...

When I connect ANY headphones to the iPod Video i can only hear from the left earphone and not the right...also, the iPod Radio Remote worked perfectly for about a month and now it doesn't work at all. When I play a song, I hear about a second of the song then I dont hear anything but the song is still playing...is this covered by the One Year Warranty and should I send it back for repair? please help
P.S. I've had the iPod for about 8 months.

if you've tried different headphones that you're sure work properly but are all experiencing the same issues on only your ipod then i would recommend that you send the ipod back for repairs as it is still Covered by the warranty.

I am ready to burn my ipod nano right now! PLEASE HELP!

Ok so I accidentally de-connect my ipod nano from my usb port without closing the connection and now it is resetting itself every second. like the apple screen comes up every second and i am starting to freka out because i got this for christmas as a gift and i dont know what to do. PLEASE HELP!

Try leaving it plugged into your computer so it can charge than restore it with the ipod updater. http://docs.info.apple.com/article.html?artnum=60944

None of the support people speak CF, please help!

I'm about to write a web service web app. for the 2nd time. I'm new to this but my first app. was a success so I plan to do it again.
In both cases, the web services weren't written with CF. Not sure what language they used but this shouldn't be a problem as far as I understand because I'm just consuming and CF should be able to do that.
This time I'm facing an address manipulation software called QAS. This software should be able to do some formating to the input address. For example, if we pass in an address with a mix of lower and uppper case street name, without state and 5 digits zip, after being processed by this software, we'll get a nice formatted address back as a result where the first letter of the street name is capitalized, added the city, state and 9 digits zip with a dash in between. That's briefly what this software can do (it can do more than this but since this software is already there and has this capability, I'm going to use this particular functionality without having to re-invent the wheel).
In Production env., we should install this software in prod. web server but in dev. stage I can install the software in my local machine, as it is written in its manual. The url to the wsdl file when it is installed in local machine is referred to as http://localhost:2021/Proweb.wsdl The 2021 is the port where this software is installed. I open up in the browser and I can see the wsdl file display nicely.
Now the problem is, I'm using cfinvoke to invoke this web service as I did in the pass but I got error saying :Web service operation DoBulkSearch with parameters {DoSearch={3300 metzerott rd | adelphi | maryland | 20783},Country={Structure},Engine={Structure},Layout={Database layout}} cannot be found.
I communicated to the support, even they're helpful but since they don't speak ColdFusion they're not that helpful to me. My last question to them was asking them to comment on my approach, in a plain english, if the steps I currently use is wrong. Here is my question to them:
1.       I’m trying to consume (invoke) a web service and reference the WSDL file through http://localhost;2021/Proweb.wsdl
2.       The method that I’m using to invoke this web service is called: DoBulkSearch
3.       I also pass a few parameters when invoking this web service and they are:
·         Country, which has a value = USA
·         Engine , which has a value = Verification
·         Layout , which has a value = Database layout
·         Search, which has a value = 1 riverside rd|new york|ny|blank zip
4.       The end result expected from calling this web service is a formatted address, which steps from this is/are considered in correct. Please
         advice
This is their answer:
        Engine has to be the structure defined in the wsdl, Verification alone is not enough of a value to pass to it. I don’t know how to pass the
        structure in coldfusion though.
        Search has to be a structure as well. If you were to use the DoSearch method, then this string would be enough to pass, it might be easier to
       start with this method.
In ColdFusion, I tried a couple of approach but unfortunately both are not working and gave the same error:
<cfinvoke webservice="http://localhost:2021/proweb.wsdl" method="DoBulkSearch" returnvariable="retVal">
<cfinvokeargument name="Country" value="USA">
<cfinvokeargument name="Engine" value="Verification">
<cfinvokeargument name="Layout" value="Database layout">
<cfinvokeargument name="Search" value="3223 st. paul street | | | 21218">
</cfinvoke> <cfdump var="#retVal#">
My Question is:
How can I pass Country, Engine, Search parameters and tell the remote site that these are structure paramater. In cfinvokeargument there is no "Type" attribute where I can write Type= "Structure"
OR this one is also not working:
Post / HTTP.1.0
Content-Type:text/xml
Content-Length:614
SOAPAction: "http://www.qas.com/web-2007-08/DoBulkSearch"
<?xml version="1.0" encoding="utf-8"?><cfsavecontent variable="soap">
<cfoutput>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<qas:QABulkSearch xmlns:qas="http://www.qas.com/web-2007-08">
<qas:Country>USA</qas:Country>
<qas:Layout>Database layout</qas:Layout>
<qas:Engine Flatten="1" PromptSet="Default" Intensity="Close">Verification</qas:Engine>
<qas:BulkSearchTerm>
<qas:Search>3223 st. paul street | | | 21218</qas:Search>
</qas:BulkSearchTerm>
</qas:QABulkSearch>
</soapenv:Body>
</soapenv:Envelope>
</cfoutput>
</cfsavecontent> <cfhttp url="http://localhost:2021/proweb.wsdl/" method="post">
<cfhttpparam type="xml" name="DoBulkSearch" value="#trim(soap)#">
</cfhttp> <cfdump var="#soap#">
(screen shot of the wsdl file in text file)

You pass a structure as a parameter to a web service by making a ColdFusion structure and passing the structure to the web service. A structure is a complex variable containg a set of key-value pairs.
Using Arrays and Structures
http://livedocs.adobe.com/coldfusion/8/htmldocs/arrayStruct_01.html
A Brief example.
<cfset search = structNew()>
<cfset search.key1 = "Value1">
<cfset search.key2 = 2>
<cfset search.key3 = "Something Else">
You would then provide the variable search as the appropiate parameter to your web service.

HP DM3 *** My Speakers Crackle*** PLEASE HELP !!

My speakers crackle. Even with the volume turned down they still crackle. Can you please tell me how to fix this? My DM3 is 5 days old. Will I have to return it? or can this be fixed?
Thanks

SPENT ANOTHER 3 HOURS ON THE PHONE TODAY WITH A HP TECH (THAT TOTALS OVER 20 HOURS THAT IVE SPENT ON THE PHONE NOW TRYING TO FIX THESE PROBLEMS) AND SHE REFUSED TO ALLOW ME TO RETURN MY DM3 UNLESS I RE-INSTALL WINDOWS 7 BECAUSE SHE WAS CERTAIN THIS WOULD FIX THE PROBLEM. SO I DID AND 3 HOURS LATER THE SPEAKERS STILL CRACKLE AND THE MOUSE STILL FREEZES. IF THE HP TECH FORCES YOU TO RE-INSTALL YOU'RE OPERATING SYSTEM THEN REFUSE TO AND ASK FOR A SUPERVISOR. ITS NOT WORTH YOUR TIME. ALL THE DM3'S HAVE THESE 2 MAJOR ISSUE'S. AS OF NOW I AM CONVINCED THAT THERE IS NO FIX FOR THE PROBLEM. DON'T BOTHER CALLING BECAUSE THEY WILL DO NOTHING BUT WASTE YOUR TIME. THIS IS COMING FROM SOMEONE WHO SPENT 20 HOURS ON THE PHONE WITH HP. I WILL GIVE THEM ONE LAST CHANCE AND SHIP THEM MY DM3 FOR SERVICE AND IF IT RETURNS WITH THE SAME PROBLEM I AM RETURNING IT AND GETTING MY 1200.00 BUCKS BACK. THIS IS SERIOUSLY BULLSHHIT THAT THEY WOULD RELEASE A MAJOR LAPTOP LIKE THIS AND NOT MAKE SURE IT WORKS PROPERLY. I WILL KEEP YOU UPDATED.
P.S. PLEASE KEEP IN MIND THAT THIS IS NOT THE FAULT OF THE HP TECHS IN THEIR SUPPORT CENTER IN INDIA. THEY HAVE BEEN EXTREAMLY HELPFUL AND I RATE THEIR SERVICE 5 STARS. THIS IS THE FAULT OF THE DESIGN TEAM THAT LAUNCHED THE NEW LINE OF DM3'S.

HT1933 Hi I have just bought a book on iBooks but it will not open as it says that it is not of the right format. Please help resolve this.

Hi I am new to iBooks. I have just downloaded my first book. When I go to open it, it says that the book is either formatted incorrectly or not in a format that iBooks can open. Which is weird as I just bought it from iBooks!
Help please.

This just happened to me and iTunes support said they would send to Apple to investigate and reimbursed me for the books. I went back on my iPad and deleted the books and I got an iCloud icon with a down arrow after I deleted. When I clicked on the iCloud icon, the book downloaded and I was able to read it.

How do you fix the iPhone Speaker? PLEASE HELP

Okay, soo i was asleep with headphones in, i woke up and my headphones were still in listening to music, then i unplugged then and my slide to unlock noise and text noise,music,etc stopped working but when i plug my headphones in, the noises all worked.
Then i tried the...
-Q-tip cleaping method
-unplugging and replugging headphone method
-ungplugging and replugging method
-Force rebooting(holding sleep and power)
-System Restore
...and no noise is coming out still, only noise that i can hear is when someone calls me, i can hear them and talk back, but when i put it on speaker,i cant hear them.
Should i take it apart and unplug and replug the headphone jack, and speakers,etc?? IDK whats wrong with it

I had this same problem until this morning. my speaker wasnt working so i tried inserting and rmoving the headphone jack about 50 times, then i sprayed air into the socket and it didnt work so eventually i bought a bluetooth protable speaker so i could listen to music in the shower and i tried it out for the first time this morning, then as i left my house double tapped the home screen and my volume bar was there, and it works fine now, i reccomend you try connecting and disconnecting from a bluetooth device or go to a shop and try out a bluetooth speaker and it might just fix your phone

I-Tunes 7 opens then freezes right away. PLEASE HELP!

Ok, I am a Windows XP user, and downloaded the I-Tunes 7. It installed, but when I try to open it, it opens then instantly freezes and I get a "The program is not reponding" window, then windows closes the non-responsive i-tunes.
I cannot do anything with my I-pod or I-Tunes.
I recently purchased my I-pod (this week) and have been able to do NOTHING! with it because of this I-tunes issue.
Can anyone help me or did I waste my money on the I-pod?

You should post in Firefox's help forum.
Firefox Support
-Jerry

Finder quits/closes after 6 right-clicks. PLEASE HELP!

Finder has (seemingly) been quitting/closing randomly since I got my MacPro. I did an archive/install, but that did not fix it. I thought it was random, but recently discovered that after 6 consecutive right-clicks, Finder will quit. The folks at AppleCare were unable to diagnose or resolve the problem. Anyone else having similar issues? Thanks!
MacPro Mac OS X (10.4.9) Dual 2.66 Dual-Core Xeon

Navigate to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items.
Log out and back in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Similar situation here:
http://discussions.apple.com/message.jspa?messageID=4530194
-mj
[email protected]
Message was edited by: macjack

I just added an "add on manager" and now I cannot find it anywhere, is it hiding or am I just not looking in the right place? Please help, thank you

I downloaded "Slims Add On Manager" and now I cannot find it anywhere.

Thank you very much, the-edmeister.
Geez, do I feel silly for not knowing this!
Thanks again.

My Right Speaker crackles... please help!!

Similar Messages

Maybe you are looking for