My ringer is not working but it shows that it is on, what do I need to do to turn it back on?

Can't hear my ringer, when I checked it; it shows that it's on. If I hook up a speaker or headset on, the ringer works. What do I need to do to have the external speakers work?0

Do you have the mute switch engaged? It's the slider above the volume buttons.

Similar Messages

  • My ipad Apple ID is not working it's showing that can't connect to App Store please help me

    My Apple ID is suddenly not working it's showing can't connect to App Store. I am facing this problem from this morning & at the beginning it showed not trusted ip. Please help me 

    Same problem as well...getting very frustrated

  • I have the ipod nano (3rd gen.), Instead of updating my songs, it resetted my ipod to factory setting but when I reconnected the ipod it said to format but it won't format because the ipod is showing that it is syncing. what do i need to do?

    I went to update my songs but instead of updates, i lost everything.  I didn't know that I lost everything until I unplugged and went into my ipod.  It had been resetted to factory setting.  Well I reconnected to try again,, it tells me to format but it won't cause the ipod shows that it is trying to sync but it's not.  What should I do or is my ipod nano finally saying it's goodbye.

    Can you play the song in iTunes?
    If you can't the song file is probably corrupt and needs to be replaced.

  • I already restore my ipod and it doesnt work. On the screen appears: do not disconnect, its been like that for days. What do I need to do? (Its an ipod nano 3º Generation )

    Thats my problem, I have tried to restore it like 6 times.

    After restoring it, did you try to reset it? To reset the iPod, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • The ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help

    the ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help

    Check the mute switch along the side, near the external volume controls.

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • HT201401 The sounds are working on my iPhone but the ringer will not work...it only vibrates on incoming calls.  Volume is set high.

    The sounds are working on my i phone but the ringer will not work...it will only vibrate.  I have the volume set at high.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    Have you tried ALL the troubleshooting steps?  If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

  • How come my Iphone4 ringer is not working after upgrading to iOS 5

    I recently updated my iphone4's firmware to iOS 5. I just found out that my ringer is not working anymore. It seems like it's always in silent mode. I tested music and it worked fine. Please help...thanks in advance

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Itunes 7.5 does not open, but it shows up in task manager please help?

    please help its been 2 months already and i cant sync my ipod cuz itunes does not open but it shows up on task manager.
    i have tried every thing but still it does not work. i have reintall my itunes and quicktime like 20 times i've gone to older version but still does not work.
    PLZZZZZZZZZZZZ HELPPPPP. im desperate and tired of liseting to the same songs for 2 months

    Let's try to get an idea of what might be going on with some preliminary questions from b noir's "smack" for iTunes launch failures:
    Is there an error message associated with the launch failure?
    If so, what does it say and what (if any) error numbers are there?
    If there's not an error message, let's check your QuickTime (its well-being is a requirement for a functioning iTunes).
    Go to the XP Start menu > All Programs and try running QuickTime.
    Does it start?
    If not, then the same question as for iTunes - is there an error message?
    If so, what does it say and what (if any) error numbers are there?
    Do you notice any other peculiar behavior with QuickTime?

  • Ever since I downloaded Acrobat Pro 11.0.09, the PDF Maker and Save As PDF have not worked, but instead cause MS Word 2013 to crash.

         Ever since I downloaded the Acrobat Pro 11.0.09, the PDF Maker has not worked, but instead causes MS Word 2013 to crash. I cannot find the cause or the solution.
    forumnotifier

    OK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
    The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
    File\Create\Batch Create Multiple Files
    When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
    If I drag excel or powerpoint documents onto it and press OK it converts them fine.  If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
    In the process of troubleshooting I also tried using the Add Files button.  That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
    The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
    Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
    Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
    Any further assistance greatly appreciated!
    Regards,
    Gray

  • I have a iphone 4s my phone ringer is not working.  I have gone to settings, sound and can't find anything turned off., I have a iphone 4s my phone ringer is not working.  I have gone to settings, sound and can't find anything turned off.

    My phone ringer will not work.  I have gone to settings and sounds and have the volume up all the way.  The vibrate setting is off.

    settings - notification - message - show preview - off

  • My iphone 6 ringer will not work evenafter i have reset. is it because of the new updates? any help on how to get the ringer working. when i test the ringer tunes it works, just that it will not work foran incoming call.

    Iphone 6. 64 gb. Versión is 8.0(12A366). Ringer does not work. Basically not getting any sound for incoming calls. Also no sound for any notifications or alerts. Have tried to reset the phone but still no sound for ringer or notifications.

    Check the mute switch on the side of the device.

  • Ipad2 Inbuilt speaker not working, but headphone is working

    I am using iPad2 32 GB, 3G + Wifi. updated with iOS 5.
    It's in-built speaker is not working, but when I use headphone, sound it working on it.
    Please help.
    I checked mute button and checked doubling clicking the home button and going all way to the left.
    Still not working..
    pLease help !!
    Thanking you in advance
    Andy
    Maryland, USA

    You've double checked that you haven't got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.  Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If that isn't the case then have you tried a reset by pressing and holding both the sleep and home buttons for 10 to  p15 seconds until the Appe logo appears (it won't remove any content). Also when you use the volume switch does it show a heanhone symbol on the screen i.e. does it think than headphones are connected even when they aren't ?

  • HT201436 Iphone ringer does not work

    iphone sound works but ringer does not work, any suggestions?

    Oh man...i feel like an ***.   That's what the "problem" was... wow.

Maybe you are looking for