My road to bw

Well,I have been a ABAP consultant for a little less than 2 years. And now I wanna turn to the BW.
Is it available?
If so,plz give me some suggestions and give me a link of materials about BW interview.
Thanks in advance.

Hi Lawrence,
Check these links where you can get an overview on BW/BI:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
[Re: How to start BI??]
Regards,
Dinesh

Similar Messages

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Cannot send mail on the road

I am on the road and in some cases have to pay for internet privileges. I can receive mail and surf the internet with Safari. But I cannot send any mail and get the error message. The clerk at the motel here says to change the outgoing mail server to their server provider. But nothing good happens for me when I do that and restart. I tried to repair permissions and restarted several times.
The problems always seem to take place on locked WiFi. Open WiFi like Panera Bread I can access and send mail usually with no problem as well at the occasional open WiFi you run across from time to time.
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)

Most if not all internet service providers used for connecting to the internet now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 which is the default port used for SMTP servers.
Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some ISPs block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain and to have better control over customers that violate the ISP's terms of use in regards to sending email.
You can try changing the server port for the SMTP server from 25 to 587 and if this doesn't work, your only option is adding the ISP's SMTP server in Mail as an available SMTP server to choose from to be used to send messages with an email account not provided by that ISP. If this isn't allowed or doesn't work either, your only other option is sending messages via webmail access using a browser which doesn't use an SMTP server to send messages.
Go to Mail > Preferences > Accounts and under the Account Information tab for your email account preferences at the SMTP server selection, select the Server Settings button below. Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
In my experience when staying at a hotel that provides free wired and/or wireless internet access, after entering the password for access provided at the front desk when checking in, I don't have problems sending messages with my .Mac account and .Mac's authenticated SMTP server which I now use as my primary personal email account. The last hotel I stayed in which was out of state happened to use the same ISP that I use at home but this was the first and only time I've come across this.
Basically it is up to the internet service provider being used to connect to the internet at the time. Some ISPs have identical restrictions in regard to using an SMTP server that is outside of their network but some are different. Since hotels/motels that provide free internet access can't expect their customers to have the same ISP and depending on the hotel/motel have business travelers that need access to sending email with their business email account using an email client such as Mail that requires using an SMTP server that is not provided by the ISP, this should be a no-brainer for the hotel and the hotel's ISP but we can thank spammers for these problems.

Porting Keynote for ultra-portable shows on the road

I am starting this thread to discuss questions of how to leverage Keynote and iCloud to deliver presentations while on-the-road with limited access to hardware. To wit:
As you can see from the listings below, I have access to useful hardware and software. I am writing this to seek advice on how to leverage these tools to give business (and personal) presentations while I'm on-the-road and may (or may not) be carrying hardware with me. If I'm forced to travel light, I was wondering if simply taking a thumb drive and/or using my iCloud account may be enough.
I work for a small construction business that does projects in eight surrounding counties. I work as a "Producer", which means I'm both an office manager (writing up contracts and job estimates, arranging business with customers, contractors and suppliers over-the-phone) and a project manager (working with those same business contacts in-person on remote project sites). I am also applying for work outside of our business, and want to be able to use visual aids if/when necessary to illustrate what I do during an interview.
I recently started taking a Lynda.com course on "Setting Up Your Mobile Office to Work from Anywhere", and it got me to thinking about how I could use iCloud and Apple's iWork apps to create business presentations that could be played in a variety of portable scenarios. My goal is to be able to travel light and still be able to make presentations to individuals or groups.
MY CURRENT PERSONAL/BUSINESS HARDWARE & SOFTWARE
iMac 13,1 : late-2012 slimline model, 2.9 GHz Core i5 processor, 8 GB RAM, 1 TB hard disk, USB SuperDrive
MacOS X 10.8 Mountain Lion
iLife 2011 (including iPhoto 9.2.3)
iWork 2009 (including Keynote 5.3, Pages 4.3, and Numbers 2.3)
Microsoft Office 2011: Mac
Final Cut Studio 3, including Final Cut Pro 7
Adobe Photoshop Elements 8
iCloud account, free-tier service
DSL high-speed connection to internet
Have been shooting digital photos since November, 2001; manages iPhoto library of over 52,000 images
OTHER HARDWARE AVAILABLE
white MacBook 2006 vintage, 1.83 GHz Intel processor, 2 GB RAM, 160 GB hard disk, SuperDrive, MacOS 10.6.8, iLife 2011, iWork 2009, Microsoft Office 2011 (MacBook is not my machine; used by someone else in my office. This computer has battery issues; it must be plugged into AC power.)
Epson EX7200 projector, with USB thumb-drive port (for JPEG presentations), VGA port, and HDMI port.
Scenario #1: If I prepared a Keynote presentation on my iMac and transferred it via WiFi or thumb drive to the old MacBook, do I need to copy just a single Keynote file over and that's it? No attached files or folders with files in them?
Scenario #2: I have successfully, in the past, used the Epson projector and a thumb drive loaded with photos and also a USB camera card reader with an SD card attached to show simple JPEG photo slideshows. If I wanted to just use the Epson's USB port to show Keynote slideshows, they would have to be stored in folders as JPEG files. How easy is this to prepare with Keynote? Are there any pointers available on designing a useful workflow for preparing such slideshows without a lot of fuss?
Scenario #3: Forget the projector; too much bulk. If I had just a small iOS device like an iPod touch, and I wanted to plug into someone else's projector (or if I wanted to just show a slideshow of images to one person with no projector) what do I need to be prepared for, hardware-wise? What do I need to do with Keynote, both on the iMac for production and on the iOS device to make it look right?
Scenario #4: Let's say I'm going to carry everything on a USB thumb drive as a backup. What is the best way to set it up to play on someone else's hardware? (I assume three tiers of compatibility: I do network with Mac/iOS users, so Tier #1 would be Apple compatibility with Keynote. Tier #2 would be general compatibility with Microsoft Office 2003/4 for pre-XML file formats. I guess that Tier #3 would be general-purpose PDF files, or maybe the JPEG file approach with thumb drive ports on projectors.) If I'm doing Tier #1 and I'm plugging my thumb drive into someone else's MacBook, are there any pointers to avoid font conflicts or other issues? If I'm doing Tier #1 and I'm borrowing someone else's iPad to show a slideshow, how do I get the files off of a thumb drive to show on the iPad?
Scenario #5: ** iCloud ** Let's say I'm traveling VERY light, and I want to give a presentation that's stored on my Apple iCloud account. How can I organize files and folders so that Tier #1, #2 and #3 files are available (assuming I have an internet connection) so I can play a presentation off someone else's hardware, be it a tablet or laptop. Is there anything I should know about how to prepare this and how to reliably be able to log-in and access my iCloud files? Are my iWork 2009 apps going to function in preparing and saving presentation files with my iCloud account?
Scenario #6: Scenario #6 is Scenario #5, but substituting another service instead of iCloud, like maybe Google Drive. Is there any way to set up an account with files so I can reliably be able to access said files for a presentation?

This is a great reminder. I too labor over my slides, sometimes way too much labor and not enough on the presentation. This is also a reminder to check out your venue BEFORE you arrive. Talk to the tech in charge if at all possible and tell him/her the system your bringing and ask if they can accommodate your requirements. I am giving 4 classes for adult continuing education at a local high school. I've had to bring my own flat screen TV because their projector was sub-par and did nothing for my slides.
Best practice if it is feasible and reasonable to go to the venue and check it out days before your presentation.
For the amount of work we put into our slides, we deserve for them to be shown at the best possible resolution.
Thanks again for the reminder.

New development - need new roads added and 33 lot address locations corrected

Hello, I am in the new homes and residential development business. I just developed a new residential development and I need to get Bing to update their roads and addresses. The addresses and roads have been in existence since about August 2014. I would have
expected them to be updated by now but the roads are missing and the address locations are incorrect.
I have figured out how to get in touch with and submit bulk data to Google (Map Content Partners), but I cannot find an access point to Bing. I have gone the route of reporting mapping errors via Bing Maps, but I
was wondering if their is a way to give Bing bulk mapping data to update new addresses and roads. I have shape files that include parcel boundaries, road centerlines, address blocks, and address points. I have also included the lot address and correct location
coordinates below.
Any help appreciated.
12306 186TH ST E Puyallup, WA 98374 (-122.26914, 47.08904)
12310 186TH ST E Puyallup, WA 98374 (-122.26883, 47.08905)
12314 186TH ST E Puyallup, WA 98374 (-122.26853, 47.08906)
12302 186TH ST E Puyallup, WA 98374 (-122.26948, 47.08903)
12318 186TH ST E Puyallup, WA 98374 (-122.26819, 47.08906)
12228 186TH ST E Puyallup, WA 98374 (-122.26979, 47.0891)
18509 124TH AV E Puyallup, WA 98374 (-122.26786, 47.08912)
18413 124TH AV E Puyallup, WA 98374 (-122.26744, 47.08947)
18510 124TH AV E Puyallup, WA 98374 (-122.26832, 47.08954)
18517 123RD AV E Puyallup, WA 98374 (-122.26887, 47.08956)
18520 123RD AV E Puyallup, WA 98374 (-122.26955, 47.08958)
18407 124TH AV E Puyallup, WA 98374 (-122.26725, 47.08963)
18502 124TH AV E Puyallup, WA 98374 (-122.26811, 47.08969)
18511 123RD AV E Puyallup, WA 98374 (-122.26869, 47.08974)
18401 124TH AV E Puyallup, WA 98374 (-122.26703, 47.08979)
18516 123RD AV E Puyallup, WA 98374 (-122.26941, 47.08978)
18412 124TH AV E Puyallup, WA 98374 (-122.26792, 47.08985)
18507 123RD AV E Puyallup, WA 98374 (-122.26847, 47.0899)
12317 184TH ST CT E Puyallup, WA 98374
(-122.26683, 47.08997)
18512 123RD AV E Puyallup, WA 98374 (-122.26924, 47.08995)
18406 124TH AV E Puyallup, WA 98374 (-122.26772, 47.09001)
18415 123RD AV E Puyallup, WA 98374 (-122.26827, 47.09005)
18508 123RD AV E Puyallup, WA 98374 (-122.26904, 47.09012)
12313 184TH ST CT E Puyallup, WA 98374
(-122.26707, 47.09019)
18405 123RD AV E Puyallup, WA 98374 (-122.26805, 47.09021)
18416 123RD AV E Puyallup, WA 98374 (-122.26884, 47.09027)
12309 184TH ST CT E Puyallup, WA 98374
(-122.26732, 47.09033)
18410 123RD AV E Puyallup, WA 98374 (-122.26864, 47.09042)
12305 184TH ST CT E Puyallup, WA 98374
(-122.26754, 47.09046)
18404 123RD AV E Puyallup, WA 98374 (-122.26842, 47.09059)
12301 184TH ST CT E Puyallup, WA 98374
(-122.26776, 47.09061)
12227 184TH ST CT E Puyallup, WA 98374
(-122.26811, 47.09079)
18503 124TH AV E Puyallup, WA 98374 (-122.26763, 47.0893)

It doesn't look like our data provider has this data yet. Note that in order for new addresses and roads to be added our data provider usually needs to drive to correctly capture all required information. I'll pass this information on to them so they can
get this updated.
http://rbrundritt.wordpress.com

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?

Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?

Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier.

I am in Saudi and trying to download navigon middle east. Every time I try to buy the app it will show up, says waiting and disappears. How can I get around it and not get lost on these crazy roads?

I am in Saudi and trying to download navigon middle east. Every time I try to buy the app it will show up, says waiting and disappears. How can I get around it and not get lost on these crazy roads?

I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
Something doesn't make sense here, though I'm not saying the previous owner is lying....
Time to send your serial # to iTS and let them see what's happening here.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Here we go again - Verizon Centro Versamail not working with Road Runner

I posted back in early Demember about a problem I encountered receiving my Road Runner email on my Verizon Centro in this thread. The crazy thing just decided to start working on it's own after a month of failing to receive emails. Well, this afternoon it decided to choke again and has been choking all day. I tried my wife's Centro gotten at the same time as mine and it's doing the exact same thing. Each auto sync or attempt to manually retrieve email results in the following error:
Account   Road Runner
Action      Manual Sync (or Auto Sync when that time arises)
Started    12/12/08 4:14p
Ended      12/12/08 4:15p
Status      Failed
Messages 0
Bytes        15286
Error
Error parsing server repsonse. Please re-sync.
initialization
Connection establisment
User authorization
Process server changes
Disconnected
Error 05DF:1879:1358 (I can't find this error on Verizon or Palm to save my life)
Of course this is happening right before I'm heading out of town to coach my kid's hockey team in a tournament - a time I really rely upon my mobile email. I am ready to pull out my gun, blast a few holes in the thing and go get myself a Motorolla Q or a Blackberry. Can anybody help with this goofiness!?!
Post relates to: Centro (Verizon)

This is what I get when I go to download the beta as Verizon wasn't listed as one of their carriers: I guess now that I read it more closely, it looks like it sends one inernational SMS for each account I register, not each email sent.
IMPORTANT
Use of this software includes sending an SMS message to us for each email account you register. This is for purposes of testing the reporting functionality.
The number is +447624802625, located on the Isle of Man. For most users, this will be an international SMS leading to a charge on your bill. Others may not have SMS messaging in their plan. Please refer questions regarding service plans and expenses to your network operator.
By downloading and installing the software you acknowledge responsibility for any charges incurred while using this service.
More information can be found in the Release Notes for your platform in the Announcements forum.
Please click the link below to indicate that you understand and proceed to the download page.
I understand. Please let me download the software.
Post relates to: Centro (Verizon)

Here we go again - PLS DON'T LOSE WAVY 10/FOX 43/NBC IN HAMPTON ROADS

Gosh, we got through the fiscal cliff, and we got through not losing CBS on FIOS, now we have the threat of losing NBC! I sure hope "three is a charm" as this would be a major setback if that happens. VERIZON CAN YOU HEAR ME NOW? - PLEASE DO NOT LET NBC/FOX LOCAL STATIONS GET AWAY In Hampton Roads.

It's better to post the URL of the feed (as you have subsequently done) than the contents of the feed .
From the FeedValidator report the feed is basically OK for iTunes. There are several occasions where 'content:encoded' sections (following immediately on 'guid' tags) should be enclosed in
<description>...</description>
tags: however all this will be ignored by iTunes anyway and only applies to other readers. The 'potentially dangerous content' referred to by FeedValidator is within the 'content:encoded' tags and so isn't relevant to iTunes. They are referring to an inline css style, and I don't know whether this might cause a problem elsewhere.
You should really have a language tag, e.g.
<language>en-us</language>
(you have a dc:language tag but that's for a different system). This should be placed in the top section, before the first 'item' tag.
It's advisable to have an 'itunes:explicit' tag for each 'item' -
<itunes:explicit>yes IF CONTAINS ADULT MATERIAL, OTHERWISE no</itunes:explicit>
it's not compulsory if you have no adult material, but you must have a 'yes' if you do.
You can check your feed by subscribing in iTunes from the 'Advanced' menu - this has the same result as clicking the 'Subscribe' button on the Store page. If it works OK there you are ready to submit it.

Road map when migrating uccx 7.0.1 SR5 towards 8.0.2

Folks,
I'm here pretty much to give you a heads up on my road towards migrating uccx 7.0.1 SR5 to 8.0.2:
1) First, I took the backup from my uccx 7.0.1SR5 using the PUT tool (pre-upgrade tool). It is straight forward, no big deal on it. Backup saved on sftp server.
2) Once I did a fresh install on our spare server with 8.0.2, I loaded my PUT backup from sftp...again..no big deal on it. It seemed that everything went fine...
3) When I was doing the tests with the new uccx, 8.0.2, checking scripts...queues...I realized that the calls were not being queued at all..and I was getting an scriptNotFound error.
4) After frustration because I spoke with couple TAC engineers...I had to fix this issue by my own. After research I figured that to fix "scriptNotFound..." there is a trick in which is not documented clearly. When uccx 7 calls a subflow it DOES NOT ADD THE WORD "SCRIPT" in front of it..and on UCCX 8 YOU HAVE TO add the "script' in front of your subflows. After that..no more "scriptNotFound..."error and our application subsystem was no longer in partial service. afff
5) Now, I was told by the people who wrote the cisco upgrade doc that SU2 update for uccx 8 fixes most of the path related issues...again..I did install the patch yesterday..and..everything seemed to be fine..no errors...now im just waiting friday to test it out, and hopefully will be a happy end!
If I miss something here let me know...even if I can help someone..please let me know.
Regards,
Thiago henriques

Folks,
After quite sometime working towards our migration from uccx 7 SR5 to uccx 8.0.2 I finally got it working!!!!wohoooooooooooooooooooooo
Another change was necessary on create file document steo...which is not needed on uccx 8. Me and one TAC engineer (very good one) we removed the "Create File Document". Here it is what the TAC told me:
While accessing an xml document that is uploaded into the document repository, the Create File Document is not needed.
Simply use the Create XML Document (DOC[test.xml]) step to reference the XML document to be read.
If I can help anyone with this, please let me know.
Regards,
Thiago Henriques

End of the road for my Color Classic???

Greetings. Lifelong Mac user here who, in the wake of Jobs’ passing, retrieved my Color Classic from the attic, thinking it would surely boot right up. It worked as recently as maybe 4-5 years ago, but all attempts over the past month to successfully boot it up have been in vain. After one purchase from Radio Shack and three from eBay, I’m 99 percent done throwing any more money at it. But I’d like to see if any of you could maybe help me out before I give up the ghost. I don’t have long, since I’ll need to return the internal HD I just bought off eBay soon if I want a refund. Here’s the rundown:
** Initially, it would boot up without the startup chime, show a grey screen for a minute or two (no icons at all), then give the eight-tone chimes of death.
** Buying a new PRAM battery led to it giving the startup chime and showing the smiling Mac, but that would give way to the flashing question mark over the floppy icon. I tried resetting PRAM, which did lead to the three successive startup chimes, but still got the question mark afterward.
** Next thing I did was buy a complete set of 7.1 discs off eBay. Using either the Disk Tools disc or the Install Me First disc, I would get the startup chime and smiling Mac, but then I couldn’t get past this message: “This startup disk will not work with this Macintosh. Use the latest installer to update this disk for this model.” For some reason, the mouse wouldn’t work when doing this, so I’d have to power off with the main switch and then eject the floppy with a paper clip. I would later learn that these discs apparently wouldn’t work on the CC because of a missing System Enabler.
** Next step: buying 7.6 Disk Tools discs off eBay. This time, the startup chime and happy Mac gave way to a sad Mac icon, a "0000000F / 00000066" error message and four-tone chimes of death. That led me to believe my factory HD was bad, sooooo …
** I bought an internal HD off eBay with 7.5 already installed on it. I had high hopes that this would finally do the trick. The heavens would open up and I would see the desktop. But ... after the swap, I was greeted once again with the flashing question mark. I disconnected and reattached the data and power cables to the HD three times, but to no avail. I tried booting off the 7.6 Disk Tools with this new HD, but got the sad Mac / "0000000F / 00000066" sequence once more. I tried booting off the 7.6 Disk Tools with no HD attached and got the same thing. This was the most depressing night of all.
** Today, with the new HD installed, I tried booting off of old 7.0.1 and 7.1 startup floppies my dad made back in the day -- and one or both of them actually progresses past the smiling Mac to the "Welcome to Macintosh" screen. But then, the "use the latest installer" screen takes over.
So this is where things stand. I'm holding out hope that I can having a working CC without spending any more money, but I'm not optimistic. Tonight I might trying washing the logic board in the dishwasher, as well as booting with the logic board disconnected and then pushing it in shortly after the startup chime (which I had tried with the factory HD without success).
Any thoughts? Ideas? Or should I call it a day, put it back on the side mantle in my living room, and go the Macquarium (or MacAntFarm) route down the road? Thanks in advance for your help!

The Color Classic is pretty straight forward to work on because the motherboard is just a matter of pulling it out.
But I don't think it's a bad motherboard so that is the good news. Sounds like the original hard drive died but before you toss it try seeing if it is just a matter of the heads being stuck. Take it in hand and gently swish it back and forth a few times to see if it that will unstick the heads. If you had a clean room I would say open the drive and gently turn the platters than zip it back up and see if it will work.
The "new' hard drive you bought sounds like it is pooched as those clicking sounds are usually an indication of a bad drive so return it ASAP for a working one or a refund. But just in case if you look at your old hard drive does it have terminators on it, they will look like two long black strips with multiple prongs attaching them to the motherboard of the hard drive. Now look at the new one, does it have any or a place for them? Though my memory is foggy on SCSI drives but that 700 might have a jumper instead but that could be wrong.
In terms of the OS, you can run System 8 on it. But you must buy the Apple release version for all Macs which comes with a floppy disk to boot your CC as well as a CD with the system SW on it. The CD is white but you will need a SCSI CD drive to install the sw. The error messages tell me that those disks are the wrong ones and not something wrong with your CC.
Now if you were into experimenting..... the following motherboards from other compact Macs will work in your CC.
The motherboard from the LC 525 is a straight swap in and even the ports on the board mate up with the holes on the rear cover. The LC 550 as well, which was actually the motherboard that the CC II used.
The motherboard from the LC 575 will also work and that adds a 68040 cpu into the mix plus the upgrade to 72 pin simms which allows you to add up to 128mb of ram with a modification to the case of the CC. The two other boards I mentioned also take 72 pin simms so you can bump up your CC from 10mb to 32mb.
I wrote a short page on my experiments here, http://www.kevinomura.com/macs/colorclassic/index.html .
In any event I think it's just your hard drive that is the problem since your video sounds good, don't toss that CC as there are still collectors out there looking for them.
On other thought, since the hard drive is on a caddy with a zif socket it's possible that some of the pins have a bit of corrosion on them. Check the one's on the hard drive side and see if they look clean, if not clean them. on the computer side that will be tougher since it's deep in the case but a few insertions of the drive might be enough to knock some of the corrosion off and make a better contact.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

IPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

Hi envisionquest,
I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
Regards,
- Brenden

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

My road to bw

Similar Messages

Maybe you are looking for