My roland Ua-25ex usb audio interface audio input no recognised by macbook pro running osx 10.

my roland Ua-25ex usb audio interface audio input not recognised by macbook pro running osx 10. ...the audio outputs are ok but the (audio in) input preference  for the UA-25ex is greyed out and the sliders for input volume etc  are disabled ... and I can only record voice by using the macbook pros onboad microphone not the usb interface 

Logic Users
Looooong Tutorial for beginners
MacPro Videos on Logic
i have all the logics but i don't know them deeply.
i like some of the music files/loops you get bundled with it, there's plenty to get started.

Similar Messages

  • Have a macbook pro running osx lion, connected a kindle fire using micro usb to transfer pictures and the disk icon won't show up on the desktop.  When I ran disk utilities the kindle does show up there.  Any thoughts as to why it's not recognizing?

    Have a macbook pro running osx lion.  Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop.  Also sometimes get a message sayiing computer doesn't recognize device.  When I opened disk utilities the Kindle disk does show up there.  What am I missing?

    cashworth wrote:
    Kindle is connected directly, not thru a hub.  Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac.  She said, "I'm not really familiar with apple products." 
    Precisely why it's not an iPad, and why it doesn't cost very much.  An Apple rep would tell you how to connect an iPad to every computer.
    Go here:  http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470

  • I have a 2010 macbook pro running OSX 10.6.8 and I would like to interface my macbook to a HD tv. I purchased a interface cable but cannot seem to communicate with the TV. Do you have any instructions or tips that I can use to accomplish this task? Do I

    I have a 2010 macbook pro running osx 10.6.8 and would like to interface my mac to my HD tv. Are any instructions available to reliably make this connection and if so what is needed on my part. Is the software compatible or do I have to upgrade to a later version OS. Thank You,
    Gene

    I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success.  Again, I'm not sure if I need to upgrade my OS software Any Suggestions?

  • What audio interface should I get w/ my Macbook Pro?

    Hi,
    Have a gig where I am covering tons of tunes on keyboard.
    In the past, have just used a keyboard and onboard sounds.
    I have Mainstage - have never used it... sounds great.
    What audio interface is great out there?
    Got an older Macbook Pro:
    2 Ghz Intel core Duo, Memory:  2 GM 667 Mhz, etc...
    Is this fast enough?
    Anyhow... what interface should I consider?
    Thanks in

    I use one of these:
    ESI - UGM96
    Tiny and made of metal.

  • Whats the best Audio Interface to use with Logic and MacBook Pro?

    I currently own a Line 6 Pod X3 Pro and although its much better than the Eleven Rack (what an overrated piece of junk in a pretty candy coating, more fizz than club soda and still no balls. Some say it just needs a cheap overdrive box to do the trick. I say how can it possibly be worth a Grand if a cheap added piece of equiptment is needed to improve the sound?) It's still not exactly top notch, to say the least.
         I was really considering the SSL (Solid State Logic) XLogic Alpha-Link MADI, a 24 channel high-end AD/DA Converter. It's somewhat pricy, but you can't possibly find a bigger bang for your buck, however I don't really need that many channels. I'm really going for quality over quantity, but I'll pay for the extra inputs if there's no way around getting top of the line otherwise.

    Thanks but I already figured it out, or rather B&H did for me. Firstly, to use the SSL with a DAW you'll need to use the Extreme "PCIe card" which neither notebooks or iMacs accomodate. So unless I want to dish out an additional $1,500 for an RME laptop interface (with built in PCIe card) for this interface i'm shoot out of luck, boo! I was really looking foreward to that set up.
        However, to answer my own question (and save a couple hundred bucks) you simply can't beat Apogee's Ensemble, which is built specifically for Mac. Much simpler - no drivers needed, and I actually understand the specs, 16 channels, and 4 of which even have transparent mic preamps. And its only $200 more than the Rosetta (only 2 channels, and nothing but converters - no preamps).
         The main thing I also wanted was to have as least components as possible going into Logic. I already passed my "gear collecting phase," and the more I added the worst it sounded. I was already forewarned of such results, but when your a newbe like I was I guess you have to find out for yourself. So I'll be getting rid of my Line 6 POD X3 Pro; dbx 1066; Presonus Eureka; Aphex 204; and 8821 Sonic Maximizer ( I already got rid of the 11-Rack, good riddence!
       And replacing them all with an Avalon 737 - anything that sounds that good over YouTube has gotta kill - and the guy from B&H said "thats one SWEET set up!" Of course every body knows Apogee and Avalon are no brainers (if you've got the patience to save up for the good stuff) but I'm more of a best kept secret type of guy (or try to be) however this time I don't mind conforming. Taylored quality and simplicity...Perfect...what more can a guy (or girl) ask for (now if I can only get my hands on some Vienna Symphonic Orchestra Software to pick up the slack where Logic is lacking.)
        I just want to stop with the learning every new gadget nonesense already and get back to being a musician again.
    PS How do I switch this topic to the Logic forum? I'm sure it will be more helpful to others there.

  • MacBook Pro running slow after USB flash drive

    I mount a Kingston USB flash drive to my 30 days old MacBook Pro running Lion 10.7.4
    My Mac didn't recognize, so I inserted another one and it did recognize it.
    And I notice my mac was running slow, some task that I did the day before (illustrator cs6) were really fast.
    But after that USB flash drive it went slow, I thought it was and error and reebot it, also cleaning out the Cache and other stuff with CleanMyMac.
    But it continues to run slow.
    Please if someone knows what I can do I will appreciate it.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Audio/midi interface for macbook pro with OSX 10.7.4?

    I have been running Sibelius and GarageBand with my keyboard and sometimes vocals in my  imac with OSX 10.6 via an old Tascam US-122 interface. I now have a new MacBook Pro with OSX 10.7.4, and am set up to run Sibelius and Logic Pro 9, but I can't seem to find a compatible audio/midi interface. There is plenty of discussion on M-Audio's site, but as of May '12, still incompatible. Ideas? Thanks. John

    Yeah, the new MacBooks are USB3 i.e. you have to be careful which interface you use as some of them don't work yet.
    Personally I have a NI Tracktor control 2 for live work ( works with USB 3 but no midi ) and a Focusrite Saffire for recording. My Saffire however is Firewire.
    I do know that the Focusrite Saffire 6 is now working on USB 3 though. http://us.focusrite.com/usb-audio-interfaces/saffire-6-usb  + it works with Mountain Lion.
    Sadly though it's still a backward compatible USB 2 inteface, but... if you're only recording Guitar and vox, this really won't matter to be honest.
    Also I'd recommend Focusrite over M-Audio gear any day of the week.

  • I am wanting in input audio to a MacBook Pro  running 10.9.4.  Since there is only the internal microphone as an input choice, how do I accomplish this?

    I am wanting in input audio to a MacBook Pro  running 10.9.4.  Since there is only the internal microphone as an input choice, how do I accomplish this?

    Not something I've ever done, but I found a 9-year-old article from MacWorld -> http://www.macworld.com/article/1041790/tapetocd.html - that explains it a bit. Apparently the only software that you need is GarageBand and a hardware interface. Just Google "copy audio cassette to mac" and you'll get tons of hits.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Audio in on my mid year 2012 MacBook Pro

    I want to feed audio from a  Yamha mixer into my MacBook Pro which doesn't have an audio input. How can I do that without usb adapters?

    You can't, it doesn't have Audio Input.

  • Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

    You may need a 3rd party application to view the DVD in a wWindows format such as
    http://flip4mac-3.en.softonic.com/mac
    https://www.macupdate.com/app/iphone/5758/vlc-media-player

  • MacBook Pro running Leopard has suddenly thinks audio CDs are blank.  Also not recognized in Itunes.

    MacBook Pro running Leopard has suddenly thinks audio CDs are blank.  Also not recognized in Itunes.  What should I do to determine whether it's a hardware or software problem? Or is there something unusual about these CDs?

    I have the exact same issue.DVD's work perfectly, but audio cd's have stopped working.  I think it's pretty recent, but can't confirm it because i don't use audio cd's daily. So I think it might be software related instead of hardware related. I Have a Macbook pro 15" mid 2009 running the latest OSX release.

  • My USB hub driver is not installing on my macbook pro windows 7 partition ?

    hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

    yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
           - i changed the usb port .
           - i changed the hub it self .
         - i seaarched online for the driver automatically
            - i searched online for the driver manually ie. hardware id ..
             - i checked the connections,,
    anything else should i do ??

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

    I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

    I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

  • Illustrator CC 17.1.0 crashes when editing preferences, user interface. Running on MacBook Pro i7 OSX 10.9.5

    Illustrator CC 17.1.0 running on MacBook Pro i7 OSX 10.9.5 - crashes when editing preferences, user interface. Also crashes when quitting application. Anybody any ideas?

    While 2 GB is the absolute minimum to install Mavericks, if you want to do anything with the Mac you need more then that. Upgrade your RAM.
    Until you upgrade the RAM seriously consider shutting down the Mac nightly. You should also seriously review the items in the User Login Items to see if there are any there that you really don't need to have startup with your login to reduce the amount of RAM you are using.

Maybe you are looking for

  • Error in query(on 2nd April)

    Hi all,i am getting the error in following query. Error is:Not a sigle group-group function. SELECT S.SCHOOLNAME,COUNT(DISTINCT LR.RESPONSER_ID) AS LCOUNT, SUM(DISTINCT DECODE(LR.QUESTIONNAIRE_ID,62, L.WORK_SPACE))/5 As LITSUM, MIN(DECODE(LR.QUESTION

  • Permissions issue: An error occurred while trying to save your photo librar

    I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08). My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has su

  • No attach library

    Why display this error? FRM-40039: cannot attach library webutil while opening form test. Alexandre

  • Grep to add tab character after first character?

    Hello Are any GREP wizards able to help with a question? I am trying to add a tab character after the very first character in a line in a paragraph style. So for example I would like a tab after the I, D, O and N in the following poem ... Incy Wincy

  • Characteristic with unlimited length

    Hello, can you help me on this issue. Is there any way in BI to handle free texts? I need load in BI and then display in queries a free text from R/3. The length of standard characteristic is restricted to 60 CHAR. Unfortunately I do not know how lon