My root directory won't let me connect to the server.

I have tried numerous times, but it's telling me my access is denied, after I pull the root directory link straight from GoDaddy. All my files upload to the server under a / folder.
What can I do to get this figured out?

Similar Messages

  • I updated my itunes version and since then it won't let me connect to the itunes store. I'm connected to the internet but it says I'm not.

    I updated my itunes version and since then it won't let me connect to the itunes store. I'm connected to the internet but it says I'm not.

    Can't connect to the iTunes Store
    What happens when you try to delete apps?
    You can't delete the apps that came with the iOS

  • HT1414 iTunes won't let me connect to the phone while it is locked without a password, i.e. I can't use the restore function. What next?

    How do I unlock an iPhone that has had an invalid password entered too many times?
    Apples' dbase says to do a restone from iTunes, but iTunes won't connect to the phone while it's locked without a password

    Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the firmware.

  • It won't let me connect to the internet wirelessly!

    I am having a problem connecting to my router/modem wirelessly.
    Actiontec
    Model Number:MI424WR
    I tried disabling WEP and enabling it as well but I still can't connect wirelessly. I tried rebooting my router/modem and my computer but it still won't help me. I checked everywhere in my sever to find errors but nothing came up. I can connect to the internet in my PC but any other wireless devices cannot connect to the internet wirelessly.
    Message Edited by Darkchiplv on 08-18-2009 07:37 PM

    Does your PC use a wireless utility software or Windows Services? Do you get any messages? Does your PC wireless pick up any networks at all?
    Joe D
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

  • Just upgraded my itunes & now it won't let me connect to the itunes store

    this has happened to me before, the last time I upgraded.
    I think it had something to do with my quicktime programs.
    i'm not sure.
    any assistance would be lovely.
      Windows XP  

    Can't connect to the iTunes Store
    What happens when you try to delete apps?
    You can't delete the apps that came with the iOS

  • Apple ID won't let me connect to the iTunes Store

    When i try signing in with my Apple ID to the iTunes Store, the iTunes Store becomes temporarily unavailable. My old Apple ID works but my new one wont allow me to sign in. Any Suggestions?

    Hello, TonyanAsia. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps that I would recommend going through when experiencing this issue. 
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jason H. 

  • Can I get Linux and Firefox on CD! My XP won't let me connect to the internet.

    My desktop operating system is XP. The latest upgrade has made it impossible to get on the internet. The Geek Squad guy says tha I need to upgrade my memory and go to
    Windows 8. The combination would cost me $200 with not quarantees that it would work.
    Downloads are impossible so I need to have the appropriate browser software on CD.
    Our laptops are fine because they are newer and make this communication possible.

    As you seem to want to replace broken Windows XP with a Linux distro, please allow me to suggest [[http://www.zegeniestudios.net/ldc]] that could help you select the right one according to your needs.
    Most if not all distros allow you to download CD images that you can use.
    You can do all this on one of the laptops that have connectivity.
    Hope this helps, if not please get back with any further questions you might have.

  • My iphone4 won't let me connect to the internet.

    it says there is no active cellular data network. my friend has the same phone and hers works just fine.

    Check Settings>General>Network, make sure Cellular Data is set to On.  Also confirm that you have a good signal from your carrier.  If still having problems, try turn putting your phone in Airplane mode for 30 seconds, then turn Airplane Mode off again.  If still having problems, try going to Settings>General>Reset>Reset Network Settings (note: this wil erase passwords for previously joined networks).  If none of this works call you carrier to be sure your data plan is properly provisioned.

  • I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to wifi at all

    I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to the wifi at all I'm tapping the wifi and nothing is happening?

    See this. http://support.apple.com/kb/ts1559

  • My ipod 5g says it is 1969 and will not let me connect to the internet

    When I charged my ipod touch 5g and it turned on it said it's 1969 and won't let me connect to the internet. I've restarted my ipod, I've tried resetting all settings including network and I tried connecting it to itunes but it won't connect to itunes due to an unknown error. How do I get my ipod to connect to the wifi and reset to the correct date and time?

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this?

    My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this? Says try again in 6180146 min. my passcode setting is off, but restrictions are on. Very frustrated. please help

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1338 My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

    My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

    It depends on what iPhone you have.
    If it's an iPhone 4S or earlier, click here.
    If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
    (73384)

  • Deauthorizing iTunes on a computer?  My laptop won't let me connect my iPhone because it says I'm authorized on too many computers, but when I try to de-authorize another computer I use it won't let me.  What's up?

    Deauthorizing iTunes on a computer?  My laptop won't let me connect my iPhone because it says I'm authorized on too many computers, but when I try to de-authorize another computer I use it won't let me.  What's up?

    What do you mean it won't let you?  What exactly does it say? (Sorry to sound so exasperated but this is like the 6th post in a row where people have made vague statements which do little to help us find solutions without a game of 20 questions.)  I'm going to guess and say you can only deauthorize a computer to which you have physical access or VPN login.  The alternative is to deauthorize all which you can only do once a year.

  • My niece gave me her old ipod touch 8GB and her passlock code.  It is stuck in the "connect to itunes" mode and won't let me even access the slide to unlock.  How to I fix??

    my niece gave me her old ipod touch 8GB and her passlock code.  It is stuck in the "connect to itunes" mode and won't let me even access the slide to unlock.  How do I fix??

    You will need to Restore it as a New Device...
    Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My brand new out the box airport extreme won't let anything connect to it.

    My brand new out the box 5th gen (2013) airport extreme won't let anything connect to it. I've tried several setups from sratch by the book. multiple resets and restores still nothing. It just keeps telling mt that the password is in correct even though it is 100% right.
    My curren set up is as follows. Phone Line -> ADSL2+ router -> Airport extreme. There is also an old airport express running of the router, this was done because the airport extremem was failing to work.
    Trying to connect:
    2x iPhone 4s
    2x macbook air
    2x Mac Pro.

    You will want the Extreme to be in bridge mode if it is currently disabled. (see image below)
    This will allow the ADSL2+ router to perform two important functions for your entire network: 1) Provide both the DHCP & NAT services, and 2) Provide PPPoE support to allow access to your ADSL ISPs network.
    If the Extreme is left in its default state, a router, it will conflict with the first item and you will have want is known as a "double NAT" condition. Something you will want to avoid.

Maybe you are looking for

  • Should I sleep HD and monitor?

    I have a program that will shut down if the computer goes to sleep.  My energy settings are: Turn display off after 1hr - Prevent computer from sleeping auto when the display is off (I'm not sure this makes any since if I have the monitor turning off

  • Mach Code

    Hi, Is there any MATCHCODE for the following fields. 1.Document Type (BLART) 2. G/L Account(HKONT) 3.Cost Center(KOSTL) Pls help me. Thanks.

  • Mp3 software worked for iBook but not MacBook

    My MP3 (MPIO FL100) player's software uploads onto my macbook, but does not show up in iTunes. I bought it in 2003 and it worked on my old iBook. Does anyone know how I can get a non-ipod mp3 player to work on my intel -mac? MacBook   Mac OS X (10.4.

  • Changing Slide Control Scale Range

    I am creating a program that will allow the user to select a range of time over which data will be analyzed.  Is there a way to set the slide control range to start at the beginning of the data set (t0) and go to the time at the end (tf)?  I can chan

  • Courious Problem Solved

    Following the installation of a new Oracle9i SCM repository, I discovered that I could not create application systems using the RON. After much experimentation, I discovered that Designer objects must be installed for this to work. The following lang