My router and access point reboots when trying to stream content from iOS devices or mac to my apple tv.

the zycel N series access point and cisco router reboots when i try to stream or mirror onto apple tv using air play. What can be the cause of the problem?

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Similar Messages

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

Router and access point

Likely either or. Of course if you "need" wireless you have to have an AP somewhere and many of them are capable of serving up DHCP and doing many functions of a small broadband thingy (I won't call these things "routers", "thingy" seems more appropriate) :)

which one i should use a router or access point to create a home network lab where i can play around with the DNS and DHCP configuration without changing the ISP router setting??
This topic first appeared in the Spiceworks Community

Router and access point connection

Tried to get smart today, took and set up my network with a wrt54gs the other day and still have some headaches after finally getting things to work. but my idea was to take my old wrt54g router and place it at the other end of my house for the wii system. I took the old router and changed the setting from gateway to router and gave it a new internal ip address. Everything worked fine, all the wired and wirless computers including the wii worked great, but when I went to my computer, where I installed the easylink program, it showed I changed networks. Do the setup crap again and it can not find the router but showed the old one as the new netork and could not connect, could not get internet or anything at this computer. But every other computer throughout the house was working great and connected to the net with no problem, the only one not connecting is the only one with easylink keeping it from connecting.
So I disconnect the added router/access point and had to run setup again with easy link, once it was up again I reconnect the old router and everything was great, showed the old as an access point and all the devices on the network. So things are great until I close my lid and my computer goes into standby, when I open it up I have the same problem again, but this time I know what to do, and I find as long as I keep this computer on all is great, shut it down all others equipment still works fine all except for the one computer with easylink on it.
Any ideas on to resolve this, I know people in the forums have said for a long time you can't use the two routers the way I have them set up, but it works great, the only problem is easylink keeps screwing me up on the one computer, if I moved the program to another computer it will do the same to that one and leave this one connecting just fine. So far my experience with easylink has been horrible, the only reason it was installed was because the box said it must be installed prior to anything else. before I just plugged things in and put in the settings I needed and life went on.

Hey,
I think you can try to update the firmware of the router, to check if that stops connection dropping. To update the firmware of router try this:
Go to www.linksys.com/download and select correct model number and version number. Download the firmware and save it on your computer.
Check the file it should be firmware image file like .bin etc. If it is a compressed zip file extract it to get firmware image file.
Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name.
Go to administration tab there
Go to firmware update sub-tab there
Browse for the firmware image file and click update
When update completes turn off modem & router.
After 2 minutes turn on modem and after 2 more minutes turn on router & it will definately work!!!

Router and access point connected to FIOS router

Here's my situation. Just installed Verizon Fios which supplies their own Actiontec Wireless router. I have an existing network which comprises a WRTG54Gv6 which was connected to a DSL modem for internet access originally and a WAP54G accesss point as a Repeater to extend the network wirelessly. I have quite a few wired and wireless connection to this netwrok and wish to retain these devices. My question is, based on where I had to connect the new FIOS router(which is where the access point is) can I connect the WAP54 to the FIOS router(through a switch) and allow the combined WAP54/WRT54G network to still provide my network services and deactivate the wireless service from the FIOS router. How do I configure the FIOS router, the WRTG54 and the WAP54(if change neded).
Thanks in advanced if anyone can help.

Easiest way to configure the Verizon FIOS with Linksys is - Leave the Verizon FIOS unplugged from the Linksys Router and disconnect it's power cable.
1. Connect a computer to the Linksys Router it's Internet Port...
2. Access the web interface of the Linksys Router, change it's default address to 10.10.10.1 and leave it's DHCP Server Settings 'Enabled'. Once done you should Power cycle the Linksys Router.Don't change the Router Mode.
3.Connect Verizon FIOS from it's Ethernet Port to the Linksys Router on the Internet Port.
4. See if you can access the Internet...
You can also have a look at this link to connect two routers.However, both the router's used in the link are linksys routers but you can still follow the link.

I have a MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks. When trying to download Yosemite from the App Store it gives me an error message. Anyone has a similar problem?

MacBook Pro late 2008 edition with 2 Gigs of RAM and running Mavericks (10.9.5). It gives me an error message when I try to download Yosemite

All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum

Airport Express and Range Extenders and Access points.

My setup is as follows
Main wireless router is a Dlink DIR-635, with SSID 'id1'
A Edimax range extender, with SSID 'id2'
A small network with a PC and a mediaplayer connected to a Jensen router acting as a switch. This network is connected to the wireless network with SSID 'id1'
through a TP-Link access point.
I want to stream music from my PCs and Ipad to the Express using Airplay.
The 'id2' network has the best signal in the room where I want the Express.
Connected the Express to this network, but it didn't show up as an available speaker neither on the Ipad nor on my PCs.
Connected the Express to the other network 'id1'. Now it shows up on my Ipad and a portabel PC. Both connected to network with SSID 'id2'.
But the PC connected to the wireless network through the TP-link, is still unable to find the Express.
Does this sound familiar to anyone?
What protocoll does Airplay use? Does the Express send any broadcast messages to inform other devices that is is in the network?
Seems to me that the Airplay protocoll is filtered by the extender and the access point.
Any hints will be appreciated.

If you are asking about "extending" or "repeating" the wireless signal, you will need both an Apple main router and an Apple extending device.
The AirPort Express (and other Apple routers) can only "extend" a wireless signal from another Apple router.

2nd gen A TV I can hear but not see when trying to stream from the iPad2, 2nd gen A TV I can hear but not see when trying to stream from the iPad2

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad

What are you trying to stream? Some websites have not enabled the video part of airplay... BBC iplayer for example.

Upgrading controllers and access points through NCS

I am currently trying to upgrade all of my controllers and access points to the newest version. I have downloaded the file and loaded it on the ftp server running on the Cisco NCS server. I tried to go to configure>controllers and Download Software(ftp) and go. I setup the schedule and it says failure. The details say %Error:Code file transfer failed - Connection Timeout. Sorry if this is a basic thing that I am missing. I have tried using an internal ftp server as well and it errors out also. Any help would be greatly appreciated.

It is setup with NCS Prime running 4 WiSM blades and 3 WiSM 2 blades in 6509 chassis. I am going in through NCS and doing configure controllers and download software(ftp) from the select a command dropdown. When I setup it up this way I have to select schedule unless I want it to automatically download and reboot the controllers, which I was trying to avoid so that I could do it during the day. It just keeps timing out on the download portion.

Aironet 1600 - A response was not received from the router or access point

Hi,
I'm trying to set up a wireless network with multiple SSID's. The new network only has CISCO products (router, switches). For the moment I'm trying to connect to 1 SSID (Windekind.Gast). the SSID is visible but when connecting devices have te folowing error message in the log:
Connection status summary
Connection started at: 2015-02-17 09:55:49-951
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started
Root cause:
Wireless association to "Windekind.Gast" failed
A response was not received from the router or access point.
Detailed root cause:
Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
The signal is perfect (I'm only a few feet away from the AP).
To make sure there is no dhcp problem I tested the swich port in access mode for vlan 30 which supplied an IP correctly. I'm really not seeing the problem and searched the web for days now! Any help would be very much appreciated!
Below the config of the access point (done via de web interface).
! Last configuration change at 05:30:28 UTC Mon Mar 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
vlan 50
band-select
authentication open
mobility network-id 50
dot11 ssid Windekind.Gast
vlan 30
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
mobility network-id 30
wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
vlan 40
band-select
mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2452
no preamble-short
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end

Hi Rasika
thanks for the reply! 10.0.0.81 belongs to vlan 1. I changed the config as suggested but no luck.. (same problems are logged in the event viewer). the ap is connected to a switchport in trunk mode and vlan 1 is the native lan (untagged). the port also is joined to vlan 30 (and others).
Below the new config. Hope you can see an error..
! Last configuration change at 22:56:10 UTC Thu Apr 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Default vlan 1
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
   vlan 50
   band-select
   authentication open
   mobility network-id 50
dot11 ssid Windekind.Gast
   vlan 30
   band-select
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   mobility network-id 30
   wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
   vlan 40
   band-select
   mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
no preamble-short
channel 2452
station-role root
payload-encapsulation dot1h
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
t

Distribution Points not appearing when trying to distribute content

Hello,
When I try to distribute content for a OS task sequence to a distribution point to my 2 distribution points using distribute content wizard, my distribution points are never shown. When I click Add distribution points, the available distribution points are
empty. Just this morning I distributed the content for boot images, packages, applications, Operating system images, and operating system installers.
how can it work for these and not for Task sequence, if it is rights related. I tried to delete and recreate the task sequence, but still the DP don't show up in the list.
I understand that once the content is distributed to a DP, the DP won't show up in the list of DP when trying to distribute content. I don't see the task sequence listed on the DPs under content, but see the other boot images, etc.
•Site Status and Component Status are all green under Monitoring.
•The distribution Point configuration Status is a green Arrow.
12 successful, 0 in progress and 0 error
•Drive Settings for these DPs are set to 15,000 mb
•I have rebooted the DP, SQL and PS Server.
Thanks,
Mark

Hello,
When I try to distribute content for a OS task sequence to a distribution point
to my 2 distribution points using distribute content wizard, my distribution points are never shown. When I click Add distribution points, the available distribution points are empty.  Just this morning I distributed the content for boot images,
packages, applications, Operating system images, and operating system installers. how can it work for these and not for Task sequence, if it is rights related. I tried to delete and recreate the task sequence, but still the DP don't show up in the list.
I understand that once the content is distributed to a DP, the DP won't show up in the list of DP when trying to distribute content. I don't see the task sequence listed on the DPs under content, but see the other boot images, etc.
Site Status and Component Status are all green under Monitoring.
The distribution Point configuration Status is a green Arrow. 12 successful, 0 in progress and 0 error
Drive Settings for these DPs are set to 15,000 mb
I have rebooted the DP, SQL and PS Server.
Distmgr.log
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
Ignoring drive C:\. File C:\NO_SMS_ON_DRIVE.SMS exists.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
Share SMSPKGE$ exists on distribution point \\TXSCCMPSDR01.DR.LPL.COM\SMSPKGE$
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (TXSCCMPSDR01.DR.LPL.COM) is submitting SDK changes from site(1DR)
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:50 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Connect: For TXSCCMPSDR01.DR.LPL.COM, logged-on as DR\SCCM_Install
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:51 AM
10932 (0x2AB4)
RDC:Successfully created package signature file from \\?\E:\SMSPKGSIG\1DR00010.5 to \\TXSCCMPSDR01.DR.LPL.COM\SMSSIG$\1DR00010.5.tar
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
10932 (0x2AB4)
Setting permissions on file MSWNET:["SMS_SITE=1DR"]\\TXSCCMPSDR01.DR.LPL.COM\SMSSIG$\1DR00010.5.tar.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
10932 (0x2AB4)
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TXSCCMPSDR01.DR.LPL.COM SITE=1DR PID=2948 TID=10932 GMTDATE=Sat Dec 14 19:01:52.367 2013 ISTR0="1DR00010" ISTR1="["Display=\\TXSCCMPSDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMPSDR01.DR.LPL.COM\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="1DR00010" AID1=404 AVAL1="["Display=\\TXSCCMPSDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMPSDR01.DR.LPL.COM\"
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
10932 (0x2AB4)
Successfully created/updated the package server in the data source
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM       10932 (0x2AB4)
Performing cleanup prior to returning.   SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
10932 (0x2AB4)
DPConnection::Disconnect: For TXSCCMPSDR01.DR.LPL.COM, reverted to SYSTEM context
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
10932 (0x2AB4)
DP thread with array index 0 ended.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
DP thread with thread handle 0000000000001920 and thread ID 10932 ended.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
Created policy provider trigger for ID 1DR00010 SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
Package 1DR00010 does not have a preferred sender.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
Package 1DR00010 is new or has changed, replicating to all applicable sites.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=1DR00010, Version=5, Status=2301
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:52 AM
6348 (0x18CC)
StoredPkgVersion (5) of package 1DR00010. StoredPkgVersion in database is 5.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:53 AM
6348 (0x18CC)
SourceVersion (5) of package 1DR00010. SourceVersion in database is 5.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:53 AM
6348 (0x18CC)
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TXSCCMPSDR01.DR.LPL.COM SITE=1DR PID=2948 TID=6348 GMTDATE=Sat Dec 14 19:01:53.052 2013 ISTR0="FileZilla" ISTR1="1DR00010" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="1DR00010"
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:53 AM
6348 (0x18CC)
Exiting package processing thread.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:53 AM
6348 (0x18CC)
Used 0 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The last source update time for pkg 1DR00002 is 12/13/2013 11:47:34 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The next start time for pkg 1DR00002 is 12/14/2013 11:47:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The last source update time for pkg 1DR00005 is 12/13/2013 11:42:39 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The next start time for pkg 1DR00005 is 12/14/2013 11:42:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The last source update time for pkg 1DR00009 is 12/14/2013 10:02:17 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The next start time for pkg 1DR00009 is 12/15/2013 9:57:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The last source update time for pkg 1DR0000E is 12/14/2013 10:36:14 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The next start time for pkg 1DR0000E is 12/15/2013 10:33:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The last source update time for pkg 1DR00010 is 12/14/2013 11:01:36 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
The next start time for pkg 1DR00010 is 12/15/2013 10:54:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
Sleep 2402 seconds...     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
Sleep 2402 seconds...     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:01:58 AM
1916 (0x077C)
Processing PullDP response 1DR - ["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:02:56 AM
3872 (0x0F20)
    Package 1DR00010, Version 5(5), ActionState 32, PkgStatus 0, ActionData =
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:02:56 AM
3872 (0x0F20)
STATMSG: ID=9509 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TXSCCMPSDR01.DR.LPL.COM SITE=1DR PID=2948 TID=3872 GMTDATE=Sat Dec 14 19:02:56.793 2013 ISTR0="["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\"
ISTR1="1DR00010" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="1DR00010" AID1=404 AVAL1="["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\"
AID2=410 AVAL2="5"     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:02:56 AM
3872 (0x0F20)
Successfully processed PullDP response file E:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\72057594037927970.PUL
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:02:56 AM       3872 (0x0F20)
Sleep 30 minutes...
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
3992 (0x0F98)
Used 0 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The last source update time for pkg 1DR00002 is 12/13/2013 11:47:34 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The next start time for pkg 1DR00002 is 12/14/2013 11:47:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The last source update time for pkg 1DR00005 is 12/13/2013 11:42:39 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The next start time for pkg 1DR00005 is 12/14/2013 11:42:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The last source update time for pkg 1DR00009 is 12/14/2013 10:02:17 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The next start time for pkg 1DR00009 is 12/15/2013 9:57:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The last source update time for pkg 1DR0000E is 12/14/2013 10:36:14 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The next start time for pkg 1DR0000E is 12/15/2013 10:33:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The last source update time for pkg 1DR00010 is 12/14/2013 11:01:36 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
The next start time for pkg 1DR00010 is 12/15/2013 10:54:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
Sleep 2339 seconds...     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:01 AM
1916 (0x077C)
Sleep 30 minutes...
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
3992 (0x0F98)
Used 0 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The last source update time for pkg 1DR00002 is 12/13/2013 11:47:34 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The next start time for pkg 1DR00002 is 12/14/2013 11:47:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The last source update time for pkg 1DR00005 is 12/13/2013 11:42:39 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The next start time for pkg 1DR00005 is 12/14/2013 11:42:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The last source update time for pkg 1DR00009 is 12/14/2013 10:02:17 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The next start time for pkg 1DR00009 is 12/15/2013 9:57:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The last source update time for pkg 1DR0000E is 12/14/2013 10:36:14 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The next start time for pkg 1DR0000E is 12/15/2013 10:33:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The last source update time for pkg 1DR00010 is 12/14/2013 11:01:36 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
The next start time for pkg 1DR00010 is 12/15/2013 10:54:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
Sleep 2334 seconds...     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:03:06 AM
1916 (0x077C)
Processing PullDP response 1DR - ["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:22 AM
3872 (0x0F20)
    Package 1DR00010, Version 5(5), ActionState 1, PkgStatus 0, ActionData =
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:22 AM
3872 (0x0F20)
Successfully updated the package server status for ["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\ for package 1DR00010, Status 3
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:22 AM
3872 (0x0F20)
STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TXSCCMPSDR01.DR.LPL.COM SITE=1DR PID=2948 TID=3872 GMTDATE=Sat Dec 14 19:05:22.316 2013 ISTR0="1DR00010" ISTR1="["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="1DR00010" AID1=404 AVAL1="["Display=\\TXSCCMDPDR01.DR.LPL.COM\"]MSWNET:["SMS_SITE=1DR"]\\TXSCCMDPDR01.DR.LPL.COM\"
AID2=410 AVAL2="5"     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:22 AM
3872 (0x0F20)
Successfully processed PullDP response file E:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\72057594037927970.PUL
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:22 AM       3872 (0x0F20)
Sleep 30 minutes...
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
3992 (0x0F98)
Used 0 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The last source update time for pkg 1DR00002 is 12/13/2013 11:47:34 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The next start time for pkg 1DR00002 is 12/14/2013 11:47:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The last source update time for pkg 1DR00005 is 12/13/2013 11:42:39 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The next start time for pkg 1DR00005 is 12/14/2013 11:42:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The last source update time for pkg 1DR00009 is 12/14/2013 10:02:17 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The next start time for pkg 1DR00009 is 12/15/2013 9:57:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The last source update time for pkg 1DR0000E is 12/14/2013 10:36:14 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The next start time for pkg 1DR0000E is 12/15/2013 10:33:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The last source update time for pkg 1DR00010 is 12/14/2013 11:01:36 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
The next start time for pkg 1DR00010 is 12/15/2013 10:54:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
Sleep 2193 seconds...     SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:27 AM
1916 (0x077C)
Sleep 30 minutes...
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:32 AM
3992 (0x0F98)
Used 0 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:32 AM
1916 (0x077C)
The last source update time for pkg 1DR00002 is 12/13/2013 11:47:34 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:32 AM
1916 (0x077C)
The next start time for pkg 1DR00002 is 12/14/2013 11:47:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:32 AM
1916 (0x077C)
The last source update time for pkg 1DR00005 is 12/13/2013 11:42:39 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/14/2013 11:05:32 AM
1916 (0x077C)
The next start time for pkg 1DR00010 is 12/16/2013 10:54:00 AM Pacific Standard Time
SMS_DISTRIBUTION_MANAGER
12/16/2013 4:45:26 AM 3392 (0x0D40)
Sleep 3600 seconds...     SMS_DISTRIBUTION_MANAGER
12/16/2013 4:45:26 AM 3392 (0x0D40)
Sleep 30 minutes...
SMS_DISTRIBUTION_MANAGER
12/16/2013 5:15:29 AM 3804 (0x0EDC)
Thanks,
Mark

Wireless MAC Filter more than 80 router are access point required

We needed router are access points Wireless MAC Filter more than 80 product required.

Use real wireless security with WPA2/AES and forget about the wireless mac filter.

Cisco Access Points Rebooting

Has anyone experienced a Cisco Access Point reboot itself, on it's own?

7 out of 17 are rebooting... but it's not isolated to one IDF it's different spots within the building.i will check the log in flash.
Hmmmmm ... And if you do a "sh version" to everyone of them it comes up saying something like "by power-on"?
If this is the case, you may also want to consider the copper cables between your Injector and your AP.

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

When trying to update Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps? Why does my Old apple ID keep appearing and how can I get Apple to change this?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

My router and access point reboots when trying to stream content from iOS devices or mac to my apple tv.

Similar Messages

Maybe you are looking for