My router isnt sending signal to my reciver. It was worki...

my router isnt sending signal to my reciver. It was working fine a week ago and now it wont work at all. the router sends connection and internet to the computer conneted to it directly through a LAN cord but wont send signal for wireless. I tried the same reciver on other computers and it did the same thing, I have someone close by and my reciver will pick that up so i know that it isnt my reciver that is the problem.

Post the model number of the router if possible try changing channels on the router.

Similar Messages

When I try to open my adobe acrobat X Pro it says it failed to send a DDE command. It was working perfectly until yesterday.

When I try to open my Adobe Acrobat X Pro I get a message that it failed to send a DDE command. It was working fine until yesterday.

When I try to open my Adobe Acrobat X Pro I get a message that it failed to send a DDE command. It was working fine until yesterday.

PCI 6220 how to route I/O signals?

Hi
I am using a PCI 6220 connected with a SCC 2345, on labview 71 XP based.
I have 24 V signal and I want to divide the frequency, and send out divided signal on RTSI 0.
I tryed to use a SC-DI on the 2345, but I don't know how to route the DI signal to the CRT0 source signal?
Any Ideas?
Laurent

There is an infodoc numbered 48430 which helps

Sending signals with 6280

Greetings!
I wonder why I can't send signals to my friends with Nokia 6280? I can recive mp3, acc and other formats. When I try send I get this message on the display. "It's not possible to send chosen files"
I've been in contact with Halebop the company I use and they say they have no limit on sending tunes to other people. My question is now if the Nokia 6280 got restrictions on sending tunes with mms and how big this limit are?
Regards
User of Nokia 6500 Slide

1) bash uses the # character to start a comment, unlike Java's //, so you would need to change the // in the pidof line to #
2) if you set a variable in a bash script, you'll need to reference that variable with a $ to get its value. So the second line should be kill -2 $a
3) In most modern Linux distributions you can just use the "killall" command that combines these two steps for you, letting you simply Runtime.exec "killall -INT maude.linux", for instance.
Hope this helps!
James
James Manning | Principal Engineer
Porivo Technologies, Inc.
919.806.0566 | [email protected]
http://www.porivo.com/
Measuring end-to-end Web performance.
Register for a FREE Performance appraisal:
http://www.porivo.com/peerReview/eval.html

How to route Quadrature Encoder signal to CC1 using PCIe 1429 + IO extension card

Hi there,
i am currently trying to interface the Basler L304kc to the NI PCIe 1429 + Cameralink IO extension board
I want to operate the camera in Ex-SYNC level controlled mode. I would like to route external Quadrature Encoder signals (connected to the IO extension board) to the CC1 cameralink control of the camera
Currently, I cannot find this option either in MAX or the Camera File Generator.The L304kc camera file only provides pre-defined pulses, or MAX only offers "External","ISO","RSTI" options for the CC1 sources.
Is it possible to route the encoder signal from the IO extension board directly to the CC1 of the camera? Or is there a work-around?
Thanks!
Derek Chan
Application Engineer
Basler Asia Pte Ltd

Hi Alex,
I posted the following (similar) text to the support center but I think it is of common interest:
A) CL-card with ext. board. One can use the ISO, ext. and RS422 encoder inputs and also output cannels ISO and external.
There is also a SMB connector corresponding to the ext. channel 0.
B) with MAX one can define what kind of signals should be routed to CC1 to CC4. As I learned from
this side one cannot use MAX or the Camera File generator but has to do this manually in order to use RS422 encoder triggering!!!
C) on the other side there exists function to route and control signals explicitely, for example
* imgSessionLineTrigSource2 -> what is this good for then? All your manuals are saying that this is done in MAX or the camera file by defining what signal drives the correspondung CC ine?? On the other side there is an example in CVI that does not work ("Trigger Each Line From Encoder") (at least it does not work with the PCIe1430).
D) Can one implement the CC routing from MAX or the camera file manually with the following functions
* imgSessionLineTrigSource2
* imgPulseCreate2
* imgSessionTriggerDrive2
or does MAX use hidden functions ore mechanism to control the CL Cards?
E) I can use one single line to setup scaled encoder triggering
* imgSessionLineTrigSource2(iLS_ZK1_SessionID, IMG_SIGNAL_SCALED_ENCODER, 0, IMG_TRIG_POLAR_ACTIVEH, 0);
but this only starts to work if I reset the encoder position to zero by sending this to the CL card, i.e.
* imgEncoderResetPosition(SessionID);
AND only in positive counting direction!
If I just run though the zero position without a position reset I do not get ExSync on CC1????
Is the information where to route the Scaled encoder to coming from the camera file? Why cannot I simply and explicitely route the scaled encoder
signal to a certain CC line? Why using all those different approaches?
F) now if in addition to E) i use
* imgSessionTriggerDrive2(iLS_ZK1_SessionID, IMG_SIGNAL_EXTERNAL, 0, IMG_TRIG_POLAR_ACTIVEH, IMG_TRIG_DRIVE_SCALED_ENCODER);
to drive ext. 0 (SMB connector) I can see exactly this behavior on the scope. No signal until I reset the encoder counter. Then I get signals as long as the image sequence is running. After the recording the signal disappears.
kind regards, Holger h.baur(at)ivisso.com

How to get controls of a vi to send signals more than once

Hi,
Recently I designed a rather neat VI that allows the user to quickly switch wiring and ID number characteristics on a certain device. The inside of the VI is an orchestration of sequences and loops that allows user full control through one control loop that cycles through until the user selects a desired function, for which the loop terminates and performs the function. After the function is complete, if the user has not pressed "stop", another loop brings the program back to the control loop.
So the VI works great, but as someone who's been interested in automation, I want to try to take this to the next level.
My next attempt was to put the finished VI as a sub-VI in a new VI that is meant to automate the user control process on the front panel. I've attempted to use both a flat sequence and the state machine template to do this, and they work great for automatically pressing buttons when working with property nodes or local variable. The problem, I've found, is that I don't know how to send signals to the Sub-VI from the connected controls at a constant rate without throwing it into a loop itself, which doesn't work because, of course, the sub-vi runs on it's own set of loops and there will be no iteration increment until the program inside the sub-vi terminates.
Or, if the VI and it's inputs are left on it's own and I try to write values to the controls of the inputs, I can definitely change button positions, but, looking at the signal flows, no signal will be sent from the connected controls to the sub-vi.
A second problem is that, due to my use of a program button that latches when pressed, I'm having a tough time trying to manipulate it will local variables or property nodes. Because of the way it functions, the "value" property nodes shows up as purple and I'm not sure how to make it tap itself to operate how it did in the Sub-VI.
Thanks in advance,
Matt

TeknoAXE wrote:
...The inside of the VI is an orchestration of sequences and loops that allows user full control through one control loop that cycles through until the user selects a desired function, for which the loop terminates and performs the function. After the function is complete, if the user has not pressed "stop", another loop brings the program back to the control loop.
Well, a tight polling loop is typically not a good design. have you tried the event structure instead?
TeknoAXE wrote:
The problem, I've found, is that I don't know how to send signals to the Sub-VI from the connected controls at a constant rate without throwing it into a loop itself, which doesn't work because, of course, the sub-vi runs on it's own set of loops and there will be no iteration increment until the program inside the sub-vi terminates.
You can wire control references to the subVI and then poll the state of the controls on the toplevel VI via value properties.
TeknoAXE wrote:
Or, if the VI and it's inputs are left on it's own and I try to write values to the controls of the inputs, I can definitely change button positions, but, looking at the signal flows, no signal will be sent from the connected controls to the sub-vi.
Of course you need to call the subVI from a parallel loop (for example) so other parts of the code don't get blocked.
TeknoAXE wrote:
A second problem is that, due to my use of a program button that latches when pressed, I'm having a tough time trying to manipulate it will local variables or property nodes. Because of the way it functions, the "value" property nodes shows up as purple and I'm not sure how to make it tap itself to operate how it did in the Sub-VI.
Latch booleans are not compatible with locals and value properties. A latch action boolean turns true until it is read by the code. If you were allowed to read (and reset it) it from multiple locations and via multiple mechanisms, you would get completely unpredictable code. You can always use switch action booleans and simulate latch action as needed using e.g. local variables.
It is difficult to give more specific comments without seeing the code. What are the subVIs doing? Are they interactive too?
If you don't mind attach your code and we will give more specific advice.
LabVIEW Champion . Do more with less code and in less time .

How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
Help!

No, unless you are using a home theatre system already, your only option is to connect to the TV.

How can I get my 2010 mac book pro to send signal out through the mini display port? end signal out through the end video signal out through the

How can I get my 2010 macbook pro to send signal out through the mini display port?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

Does the Ipod nano 6th gen capable of sending signal to headphones. Us older folks would like to use wireless headphones versus earphones with a wire.

Is the ipod nano 6th gen capable of sending signal to wireless headphones. I am 57 and do not like earphones and wire. Would like to get the nano. I understand the iphone 4 can use wireless headphones, but i can not wear it on my wrist like a watch. Thank you. techie mawmaw.

What is your price range. I know exactly what you are talking about. I always used headphones while mowing and I used to runt he cord through my shirt to prevent it from getting caught on the steering controls of the mower but one day the cord came untucked form my pants pocket ripping the cord straight out of the headphone itself. They were nice Sennheisers to!
I ended up replacing them with these http://en-us.sennheiser.com/wireless-bluetooth-headset-headphone-smart-mobile-phone-stereo-mm-500-x they are pricey at 330 but will last you many years if they are taken care of. Sennheisers are excellent quality. Best Buy oddly doesnt carry the 500 series they have the 450 and 550 but not the 500. Completely ignore the Beats by Dr. Dre they are horrible for the price point they are!
The noise cancellation is great and they are very comfortable. Like you I dont care for earbuds as I have tried many and they all hurt my ears and on-ear style would eventually start hurting my outer ear but these are very comfy!

What I would like from Cisco is the meaning of all level 3 or lower email messages my Router can send to me. So, that I can take the appropriate actions.

v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
My Small Business Router has been sending me email messages. This is a RVS-4000 version 1.
I just want to understand what my Router is emailing me or telling me...
The last message I received from my RVS-4000 was:
Oct 30 13:44:09 - IPSEC EVENT: KLIPS device ipsec0 shut down.
IPSEC EVENT sounds important. Whatever it is... And what is a KLIPS device ipsec0 shutdown????
I have Log Levels 0-3 selected...
Log Level
Setting which level log Router should recorder. Level from 0 ~ 7 means:
0: LOG_EMERG(system is unusable)
1: LOG_ALERT(action must be taken immediately)
2: LOG_CRIT(critical conditions)
3: LOG_ERR(error conditions)
4: LOG_WARNING(warning conditions)
5: LOG_NOTICE(normal, but significant, condition)
6: LOG_INFO(informational message)
7: LOG_DEBUG(debug-level message)
So, when I get any messages... I'm a little concerned. Because the RVS-4000 thinks it's an Error or better.
What I would like from Cisco is the meaning of all level 3 or lower email messages my Router can send to me. So, that I can take the appropriate actions.
I know Cisco inhered these Small Business Routers. When they bought Linksys. However, they have not discontinued them totally and they are still for sale. And Cisco has released a new version 2 of the same Router. So I believe Cisco should support them as well.
Yes, I'm a pain to Cisco. However, I think you understand I'm being scared by my Routers messages to me... And would like some relief.
Bruce

Great suggestions. Problems is this is not the forum for your "wish list" as Apple does not read these USER forums.
Send your feedback to http://www.apple.com/feedback/iphone.html

MacBook not sending signal to external display - was working fine before.

hi guys, i have a unibody macbook and i've been hooking it up to my tv for almost 2 years now using the mini display port to hdmi adapter and hdmi to my television.
tonight the macbook randomly stopped sending signals to the tv. i tried two tvs with two different display adapters as well as a DVI monitor.
the displays are detected in osx but there is just no signal sending to it. anyone have any ideas? did my mini display port just die? i've tried several cables/adapters.

Hey,
I just experienced a similar problem as the original poster, except that I'm using a minidisplayport - DVI adapter and not HDMI. Been working fine on my external screen for 2 months now and suddenly the external says no signal?
Macbook still flashes a blue screen when plugging in the adapter but does not detect the external. Haven't ruled out that the adapter is busted yet, but worked fine earlier.
I tried resetting the PRAM without any change.
Any kind of software / hardware problems on the macbook?
Any thoughts?

My iphone 5 send sms but not recive sms

IPhone 5 sends text messages but not recive text messages when the message sent from another mobile phone I notice that the message
Send but to not recive to my mobile

For me I get sms but cannot send any. I am using IOS 6.1 on IPohone 5

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor.

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor. It coincided with plugging in an Epson printer via usb - while the system was running. Pretty dumb maybe? Could I have damaged the video card? Anyone ideas? Thanks

Howdy Le Batch,
I was looking into the issue you are seeing here, and came across a helpful article for this specific situation. It's named Apple computers: Troubleshooting issues with video on internal or external displays and can be found here:
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Regards,
Sterling

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

My router isnt sending signal to my reciver. It was worki...

Similar Messages

Maybe you are looking for