My router loses ability to attain IP address everytime my cable co expires old address and ....

issues a new wone. this means every 7 days my woreless system goes down. how can i set up things so the router can pick up the new one and not drom me?

hi..please specify the router's model number...also , ensure that it has the latest firmware on it ..

Similar Messages

IPCP L2TP did not assigned address and install route

Hi all,
My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
1. Hongdian Router
2. Teldat Router
3. Win XP client L2TP with IPSEC Disable
there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
i enclosed the config LNS too
help plz anyone?

Hi all,
My Company recently using L2TP over radio link, for testing purpose the LNS using cisco 1841 and the L2TP client using 3 different machine:
1. Hongdian Router
2. Teldat Router
3. Win XP client L2TP with IPSEC Disable
there is problem when using Hongdian and Teldat router, the LNS did not assigned address and install route,the IPCP State suddenly closed as you can see at Debug LNS IPCP Fail.txt. I can assure you both router config is working (because when using another L2TP server like sl2tps or mikrotik, it just work fine).
But When using Win L2TP client, it work as you can see at Debug LNS IPCP Success.txt
i enclosed the config LNS too
help plz anyone?

WRT54GS router loses WAN DNS

I have a WRT54GS router that loses the WAN DNS from time to time. I go into the router and check the router status and the IP is set to a LAN IP address and no DNS entry. I release and renew the DNS and it picks up the WAN IP and DNS OK. This happens time to time.
At first I was powering everything down and then on – the router would NOT pick up the ISP DNS – always stayed with the LAN IP settings and no DNS. If I put a computer directly to the cable modem it worked OK.
Later I discovered if I went into the router status – releasing and renew would pick up the ISP DNS and stay until the next event.
I called Linksys and was advised to upgrade the firmware which seemed to help but this reoccurred again.
Any thoughts? Should I replace the router?
Linksys WRT54GS
v7.2.05 build 002, Jan. 9, 2008
(Mod note: Edited for guideline compliance.)
Message Edited by kent07 on 12-30-2008 04:37 PM

I have reloaded the firmware several times and with the support guy on live chat followed his instructions for a HARD RESET - the problem happened again after all that.
I see through web searches that a lot of people have the same issue but never really report a solution - just a lot of repeat suggestions.
Time will tell.
(Mod note: Edited due to non-compliance of forums guidelines.)
Message Edited by OnnagokorO on 12-31-2008 04:31 PM

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

How can I delete an Invitation from March that shows as new/unanswered in my calendar and there is no ability to scroll to address availability? iPad 3 5.1.1

how can I delete an Invitation from March 2012 that shows as new/unanswered in my calendar and there is no ability to scroll to address availability? iPad 3 5.1.1

Thanks!
Another question: If @me.com and @icloud.com are interchangeable, is it possible to delete the @me.com address? (would like to de-clutter and avoid confusion in the future)

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

After mail was moved to iCloud on jan 1, my mail app emails received have 23 lines of "routing info" between the address and the message. How can I get rid of this info?

After my mail was moved to iCloud, my mail app emails received have 23 lines of "routing data between the address and the message how can Imget rid of this "data"?

Found the answer a Mail>preferances>Viewing>Show header detail. Changed it to Default.

What good is it to have a router that doesn't block mac addresses like its supposed too!!!

what good is it to have a router that doesn't block mac addresses like its supposed too!!!

At 10:30pm I think I'd like to talk this out....Lemme give you some more details and lets get some hardware programmers involved. I think this is a cross-platform conflict or at the remote a outdated hardware problem. What do you need from me to track this issue down? I have been patient and have waited over 1yr or maybe 2, waiting for an update to correct this issue. Alas, there has been no solution to this problem. I have 13 seperate MAC addy's on the network. 1 wired and the the rest wireless(some constant, others random). All on a schedule(some timed access, some all the time). I have macBooks, Labtops, Desktops, Ipads, Ipods, DSIs, Windows7, WindowsXP Pro, PS3, AppleTV and a few random BlueTooths. Not that much.
Anyways, I think somehow there is a hole because of cross-platfom compatability that is making my daughter able to get on the net unless I change the wireless password......
No I have no proof...It's just a feeling

My WRT54G v5 router loses internet connection frequently

My WRT54G v5 router loses internet connection frequently. Sometimes occurs when you enter a web or sometimes every few minutes, but without a pattern. I have W XP Pro with SP3 and I have a pc wired to the router and sometimes 2 notebook with Wi-Fi. What could be the problem?. Thank you very much.

I have upgraded the firmware to v 1.02.8 and reduced the MTU to 1350 but after a few minutes of doing that I had the same problem... The router reboots itself, again and again and again...
It's possible to run some diagnostic utility that somebody can check ??
It's possible it would be a router failure ??
I note that sometimes is ok and when Entering some web pages the router reboots itself and I loose my internet connection, but others, the router reboots for no apparent reason...
I dont know what to do...

WRT54G Wireless Router Will Not Assign a Network Address

A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
I am a visitor at the work location with the connection problem, the router works for others without any issues.
Thanks

Well in such case .... you can try few settings on the wireless adapter ....
If you are using WLAN monitor .....
Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
At last point it shows .... all the configuration settings ...reconfirm that >> Click on connect ot a network & reboot the computer ...
After reboot see if it shows connected or not....
You can also use Static Ip in the configuration ....

Route call based on source IP address

Hello Guys,
Is there a way to route calls based on source IP address?
I want to redirect calls to specific queues based on the ip of the phone who's starting it.
Any ideas?
Thanks in advance.
Filipe Leite

Hi Filipe
I'm assuming here that you are using CallManager rather than CME?
One option might be to use the 'device mobility' feature to assign a specific CSS to devices based on their IP subnet. That CSS could have the appropriate partitions to route to a seperate trigger that directs calls to a separate CSQ.
Of course, whether you can do this depends on whether it would be appropriate to override the device CSS in this way.
Aaron

Will i lose use of my @mac address if i accept an @icloud address?

I prefer to keep using my @mac address because I want the world to know that I am an Apple and Mac owner and enthusiast since 1984, but I don't want my proposed @icloud address to be given to someone else.
So can I accept the @icloud address just so no one else gets it, and still keep using @mac or @me?
Or, Will i lose use of my @mac address if i accept an @icloud address?
Can we get a definite commitment from Apple on this?
Thanks,
Nate

Your @mac address should continue to function whether you use @icloud or not.

My router won't issue an ip address to my wireless network...

I have Netgear wireless adapter installed on my desktop computer and it says everything is working fine and it's receiving an excellent signal from the wireless router(actiontec GT704WGB), but it doesn't show an ip address and only brings up "page cannot display" on the internet. Where it's supposed to say connected, it has 4 dashes(lines). On the about page where the ip address goes it says 0.0.0.0. I've used this before at a different house on another desktop and it worked perfectly set up the same way. I've tried calling verizon and they didn't help at all. They want me to hook up the computer to the router to get any further help from them or pay for more help, which I'd rather not have to do.. At this time my desktop is not near the router and the router cannot be moved because it's plugged into the only phone jack in the house and it's already on a 20ft line from the jack and won't reach into 2 rooms away. I would prefer not to have to unhook and haul the whole computer into the other room just to get this fixed. That would be my last resort I have checked to see if the computer is sending and receiving and they were both at 4, so that looks good. I have not hit the reset button on the router because I have a wireless laptop that I'm using and didn't want to it to mess that up(not sure if it would), but I did turn the router box off and then back on again. Please let me know if you have any suggestions I could try before packing up and moving everything to the router.
Solved!
Go to Solution.

Sorry I forgot to come back and post this was solved The B in the Wep key totally looked like an 8 until I shined a flashlight on it - lol!

Router loses connection

i have a linksys BEFW11S4 Firmware Version: 1.52.02. whenever i try to stream audio from sites like amazon.com or any other site, the router loses connection. i can't even access the router via 192.168.1.1 i have to unplug the power and wait and few seconds. anyone else have this issue or know why it's doing this?

I have the same problem, but it extends far beyond just amazon, alot of sites that have streaming anything, or use flash, my router (same firmware and model as yours) disconnects. It's making me go crazy!
Let me know if you find a fix!!!!

My router loses ability to attain IP address everytime my cable co expires old address and ....

Similar Messages

Maybe you are looking for