My router RV180 doesn't detect my dsl gateway

I just bougth a RV router but when i logon to the interface to configure it the router doesn't detect internet connection, i connected the ethernet cable port 1 from dsl to the WAN port at the RV180, but doesn't detetct the gateway, need i a cross cable? Because i can logon to the configuration wizard but it seems the router cannot detect the dsl internet connection.

Hello,
Usually a DSL connection will require that the modem be put into bridged mode, and then our device is configured as PPPoE. To configure the modem you would need to speak with the ISP. Some of them call this IP passthrough, one-to-one NAT, or just bridged mode. You may have to ask for a supervisor before they will do this for you.
You will also need to get your PPPoE credentials from your provider. Then you log into the admin page on the RV180, go to Networking >> WAN (Internet) >> PPPoE Profiles. Click on Add and enter the information from the provider. Then switch to the IPv4 WAN (Internet) page and change the connection type to PPPoE and select the profile you just created from the drop down menu.
While you are there you may also want to change your MTU from default to 1472, most DSL connections require this smaller MTU size to work properly.
If you do have any issues with that your new router does come with 1 year of technical support, so you can give us a call and we can help get you setup as well.
Cisco Small Business Support Center Contact Numbers
Please note you would still need to speak with the provider first to get the modem bridged and obtain the PPPoE credentials.
Hope that helps.
Thank you for choosing Cisco,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center
*Please mark/rate helpful posts*

Similar Messages

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Good Morning Denise -
Sorry to hear you are having issues connecting to your Wi-Fi network. I'll include a few more things that you can try to troubleshoot this below. The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)? That would be one of the first things to try.
Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything. Hopefully, one of the steps below will help you with this.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Restart.
For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
• Restart your iOS device.
• Unplug your router and plug it back in.
• Unplug your cable or DSL modem and plug it back in.
Still can’t connect?
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Get more help
Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
http://support.apple.com/en-us/HT202068
All the best,
- Judy

My iMac 20"/Intel C2D 2.4 Doesn't Detect my Sanyo Xacti FH1A.

My iMac 20"/Intel C2D 2.4 Doesn't Detect my *_+Sanyo Xacti FH1A+_* (1920x1080 60p/60i/MPEG-4 AVC/H.264) Camcorder.
I followed exactly my Xacti manual, but nothing happens.
From Mini USB (Xacti Camcoder) to USB (iMac)...nothing!
After connecting the USB, In my Camcoder's screen, it says, *"Hard disk is not Connected."* & *"Disconnect USB converter cable if not using XACTI Library."*
Is this an Apple issue or a Sanyo issue?
Thanks!
Frank S.
SHOCKPROOFX.COM™ ESA
Message was edited by: SHOCKPROOF

Hi, first thing I would do is try connecting the Sanyo to another Mac.
On your Mac try going the SMC route:- http://macosx.com/forums/howto-faqs/302002-reset-system-management-controller-sm c.html
Try another connecting cable - Look on the FAQ (Sanyo Site)->http://sanyo.com/xacti/english/products/vpc_fh1a/index.html..........L
Message was edited by: elmac

Latest version of Itunes doesn't detect my internet connection.

Itunes doesn't detect/see my internet connection. I reloaded it twice, When in Itunes, I can't download anything from the Itunes site. No tutorials,no software updates, nada! I tried it in the previous version of the Itunes setup too. Same problem.
I have an HP laptop, Vista Home premium (works fine anywhere else), Nortons 36O (disabled), ATT DSL
I am running Firefox too, and tried to connect with Internet Explorer 9.xx, didn't work either. Some of the messages indicate that the Proxy Server info is missing/incorrect as configured. This is out of my league. I don't have enough background to TS this issue myself.
Seems like a sporatic, but common problem with other users as well. I need Itunes to run, correctly so that I can fix my Iphone. The limited diagnostics found in Itunes tells me that the phone is ok and communicates with the test software. But I can't get any deeper than that.
Thank you for your help.

I think you're missing the point. If you rip or purchase music at 128k, 256k, 320k etc. then there is no benefit to be had converting it to Apple Lossless. The files will get bigger but the data thrown away to make the previous lossy version cannot be reclaimed. If, on the other hand, you routinely rip in .wav or .aiff then you should end up with smaller files of the same quality which is indeed worth the effort.
tt2

WRT54GX4 could not detect internet (DSL PPPoE)

I just got the WRT54GX (srx400) router and connected it to my DSL modem using PPPoE.  I could not get pass step 8 in the setup wizard where it tries to configure the router and connect to the internet.    I always get the error that it could not detect the internet/modem and I should try to check if the modem is turned on or the cables are properly connected.   And they are.   I get internet when I directly plug to the modem.
I tried getting thru the setup manually via web interface.   I noticed that under the PPPoE option, the username and password are always the same length and they should not be.   Of course I reentered the correct user and password several times but the password always revert back to the username (my guess given the length though I can't actually see the characters) even after I reset the router several times (30+ secs resets).
Has anyone encountered the same problem? Please advice. Thanks!

Thanks for the tips. However, looks like I bricked the router.  After checking Linksys website, I found a more up to date firmware for WRT54GX4. Mine had version 1.00.13 and linksys has 1.00.19. I uploaded the later through the web interface. The upload stage was ok and completed 100%. When it was installing, it just went dead and the powerled started blinking.   This has been its state since, even if I reset the router.   From what I gathered, the firmware got corrupted.
Good thing various websites offered procedures how to resurrect a bricked router. However, I tried all and could not get a response from continuous ping, thus can't execute a tftp.   I'm now deciding on the last resort of shorting the flash and see if this works.   However, I can only get detailed procedures for WRT54G.   Is there a documetation somewhere for WRT54GX4?
This will naturally void the warranty. But from my side of the world, it's cheaper to just buy a new one than return this one for replacement/service.

HT1338 macbook pro with os 10.8.2 doesn´t detect my home wifi

My macbook pro retina with os 10.8.2 doesn´t detect my home wifi. It detects all other wifi networks. All my other devices detect the same network. The issue has been there for last 2 days and it is intermittent. It detects and joins sometimes but mostly it fails.
I have tried restarting my mac, resetting the router, changing wifi name, password, etc. but no luck.

Hi,
Until last 5 minutes, the mac was not connecting to the network. It was detecting occasionally but when I try the password it would time out. But suddenly out of no where Im able to log into the network now. The details are
PHY Mode: 802.11g
Channel: 13 (2.4 GHz)
If I shut down now or put it to sleep, it wont detect the network when I light it up again... Is there any channel change I need to do now to fix the issue for good?
Appreciate your time!
Arun
Now I have installed iStumbler and it shows close to 50 wifi networks 20 of which are on channel 11 or 13 (same as mine) with frequency around 2400.
Is that the cause. If so, do you suggest I change my channel to, say 20 or something? How do I change the channel?
Arun
Message was edited by: arunsrgm

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

javigomez88 wrote:
I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers.

HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

What is apple doing. This macbook pro doesn't detect external display, doesn't detect my wacom..

This is awsome. Cant work on this laptop... Doesn´t detect nothing.

Hey there mrlrsm,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that may help you resolve the issue with your MacBook Pro no longer recognizing the external display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Ciao,
-Jason

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones.

My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones being plugged in after I installed Mountain Lion. If I reboot, it works but after a few unpluggings and more plugins, it doesn't detect them anymore until I reboot. Help please.

This may or may not fix your problem.
Try a NVRAM reset.
Try a SMC reset.
If neither work, you're just going to have to take your unit into your local Apple Store or AASP and see if you've a hardware issue.
Good luck,
Clinton

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

MacBook Pro doesn't detect tv as display.

MacBook Pro doesn't detect tv as display when connected via Mini Display Port to HDMI adapter.

Hi l,
Is it possible to try another adapter? There have been a number of posts here about faulty adapters. Also, have you checked in Display Preferences? Selected the proper input on the TV?

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

What good is it to have a router that doesn't block mac addresses like its supposed too!!!

what good is it to have a router that doesn't block mac addresses like its supposed too!!!

At 10:30pm I think I'd like to talk this out....Lemme give you some more details and lets get some hardware programmers involved. I think this is a cross-platform conflict or at the remote a outdated hardware problem. What do you need from me to track this issue down? I have been patient and have waited over 1yr or maybe 2, waiting for an update to correct this issue. Alas, there has been no solution to this problem. I have 13 seperate MAC addy's on the network. 1 wired and the the rest wireless(some constant, others random). All on a schedule(some timed access, some all the time). I have macBooks, Labtops, Desktops, Ipads, Ipods, DSIs, Windows7, WindowsXP Pro, PS3, AppleTV and a few random BlueTooths. Not that much.
Anyways, I think somehow there is a hole because of cross-platfom compatability that is making my daughter able to get on the net unless I change the wireless password......
No I have no proof...It's just a feeling

My router RV180 doesn't detect my dsl gateway

Similar Messages

Maybe you are looking for