My Safari 6.0.1 no longer displays pictures

Recently upgraded to Safari 6.0.1 and everything was fine. yesterday I logged on to Huff Po and the page loaded fine but no pictures appear. same with Facebook *and* even on Apple's own web site, nav bar contains no text, no pictures appear. Is this a java related glitch?
iMac running OS 10.7.5
Safari 6.0.1

OK, never mind. Somehow (?) the Disable Images command in the Develop Menu was checked. Must have been a slip of the mouse when I last dumped the cache. Sorry to bother, have a great week everyone.

Similar Messages

Safari 7.0.4 no longer displays Facebook correctly

Facebook is no longer rendered correctly. I have some text on the left of the page in a column, no graphics of any kind, any many, many error messages in the console. No problems in Firefox. I have reset Safari and emptied the caches. Any thoughts?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' ' {/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari 5.1.5 is not displaying pictures in facebook chat messages.

No problem in chrome, firefox. Only Solution in Safari is downloading the picture without preview.

HI,
Right or control click the Safari icon in your Applications folder then click *Get Info.* In the Get Info window click the black disclosure triangle so it faces down.
Under General.
Deselect the box that says: Open using Rosetta.
And open a Finder window. Select your Home folder in the Sidebar on the left. Open the Library folder then the Cookies folder. Move the Cookies.plist file to the Trash.
In that same Library folder, open the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
Carolyn

In OS 10.6 and Safari 6, http: and https: are no longer displayed.

In OS 10.6 and Safari 6, http: and https: are no longer displayed.
Can this behaviour be restored??
In 10.5.8 with Safari 5.x some sites will show up as https: while the same
site in Safari 6 may, or may not, show the grey or green box https: box.
Is this this a certificate problem?
Can I set the address bar to for the URL prefix?
I have both systems on separate disks and consistantly see this behaviour on some sites.
How can I feel assured that a site is or is not secure using Safari 6??
A relative also shares this same issue
Thanks for your Help!

Safari 6 : http is not shown in the URL (& Search combined) bar, but https is always shown, often with a symbol lock. The URL address font is black, after the / it is grey.
All as expected.
Best.

Safari 6.0 No Longer Displays Linksys Web Cam Video

I have been using a Linksys WVC54GCA for serveral years. I view the camera setup and video on my browser. With the new Safari 6.0 in Mountain Lion, I can no longer display video from my Linksys Cam. It works fine in Firefox and on my iPhone/iPad. Has anyone else seen a problem displaying video on Safari?

I have a similar problem with an EasyN IP camera. Worked perfectly under Lion / Safari 5. With Mountain Lion and Safari 6 I get about 2-3 seconds of video before the video stops. As mentioned in one of the replies above, it seems Safari is doing something weird with it handling of the cgi script for the video feed served up by the IP camera. I haven't found any error messages so tracking down the root cause is proving elusive.
There's another thread discussing this issue here: https://discussions.apple.com/message/19087481

HTML text no longer displays in text editor

Aloha folks -
We've been using iweb for years now and have used Dreamweaver to edit the html files with no problems. However, it seems like anything we do now no longer opens completely.
Example: Lots of text here. This is shown by viewing source in Safari.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<meta name="Generator" content="iWeb 2.0.4" />
<meta name="iWeb-Build" content="local-build-20081119" />
<meta name="viewport" content="width=800" />
<title>PencilBot</title>
<link rel="stylesheet" type="text/css" media="screen,print" href="PencilBot_files/PencilBot.css" />

<script type="text/javascript" src="Scripts/iWebSite.js"></script>
<script type="text/javascript" src="Scripts/iWebImage.js"></script>
<script type="text/javascript" src="PencilBot_files/PencilBot.js"></script>
</head>
<body style="background: #ffffff; margin: 0pt; " onload="onPageLoad();">
</body>
</html>
Same index.html file opened in Dreamweaver:
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= PencilBot/PencilBot.html" /></head><body></body></html>
That's all I get. Same in Text Wrangler. Text Edit doesn't show ANYTHING.
Seems to be like this for all our iweb sites. All that used to open perfectly fine in Dreamweaver.
And all our Favicons no longer display.
Running iweb 08 2.04.
Any thoughts on this?
Thanks,
Denise

That's all I get. Same in Text Wrangler. Text Edit doesn't show ANYTHING.
You haven't understood what the index.html file created by iWeb does. It is very short and just redirects to the real page, in this case PencilBot.html. That's what you need to open. TextEdit is not showing anything is because you have it operating in Rich Text mode instead of the Plain Text mode required for html editing. Change the settings in TextEdit preferences to Plain Text and check the box for "ignore rich text commands in html files."

Why does Firefox no longer display .php suffix web pages which are in my Mac?

I have a question about Firefox 14.0.1 displaying .php suffix web page files which are in a Mac running Mountain Lion OS 10.8. In eaarlier versions of Mac OS, for example 10.4.7, I was able to see properly displayed web page files with .html and .php suffixes when those web page files were in my computer. I refer to seeing the page as it should properly display, not seeing the source code. If a page had a .php suffix, the browser displayed the page properly although any php scripts embedded in that page were ignored.
Apple occasionallly updated its OS and browser makers occasionally updated browsers. One day, I noticed that Safari no longer displayed web page files in my Mac if those pages had a .php suffix. However, Firefox and other browsers continued to display web page files with .php suffixes although the embedded php scripts were ignored.
Now, I have Mountain Lion in iMac.
I can no longer see .php suffix web page files in my computer regarless of the browser I use. No browser displays those pages.
A .php suffix web page file which Firefox and other browsers display in 10.4.7 does not display in 10.8 if that web page file is in the computer.
In my computer, I have html and php suffix web page files I want to see using a browser. The files I want to see and the browser both are in my computer. Html files display perfectly with one exception: if php scripts are embedded in the html files, the scripts are ignored. A file the name of which ends with ".php" will not be displayed regardless of whether there is a php script in the file. Safari displays the source code only. Chrome does not display the file at all. Firefox and SeaMonkey, which displayed .php suffix web page files in earlier versions of the Mac OSm now respond to such pages by providing a dialog box which seems to assume that the file is about to be downloaded from the Internet. The dialog box asks me if I want to use the browser to open the file or if I want to save it to disk. The file is on the disk at the time, and the computer is disconnected from the Internet. I click that I want to use the browser to open the file. Then the dialong box reopens with the same question. This happens over and over. I never get to see a web page file in my computer the name of which ends with ".php". With Firefox 14.0.1, I can see .php suffix web pages which are on the Internet or in a 10.4.7 Mac but not in a 10.8 Mac. Did I miconfigure Firefox? It seems unlikely that Firefox lost the ability to display pages in Mac OS 10.8 which it displays in `10.4.7. How can I solve this web page display problem?

Haroon mentions two solutions. I used the easier one, which is to start the Apache webserver already in Mountain Lion and to enable the php already in Mountain Lion. It worked. I see the file correctly displayed with html, css, and php. I see the page by using Firefox. I enter an address in the address bar. For example, the address might be "localhost/example/example.php". I cannot see the page by using Firefox's "Open File ..." menu option or by dragging the file's icon onto Firefox's icon. I tried using your solution also but was unable to find the specific preference to modify. I found the page of preferences which may be modified but I could not find the one I need. I found a list of descriptions of the preferences at http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries
but I could not find the specific preference which I need.
By the way, to enable loading the php module, one uncomments a line of code by deleting the initial "#" character, and one does that by pressing control key and "P" key while the cursor is over the "#" character.
Also by the way, when I use Firefox or Safari to look at the Apache web directory in which my files are, the files are listed case sensitively. For example, the files are listed: Ace, Zygote, bar. This is because lower case follows upper case. THis annoys me. I prefer case insensitive listing. When I llok directly athe directory without using a browser, the files are listed case insensitively. For example, they are listed: Ace, bar, Zygote. I guess taht Apache is doing this.

Help! My Safari shortcuts do not display pictures of the page anymore on my iPad.

I use shortcuts from web pages for various reasons and after a recent update, when I try adding shortcuts to my home screen they no longer display photos of the page but ugly white boxes with lines throughout. The previous pages I have shortcuts to all still have a photo of the page on their thumbnail but the new ones I am trying to add do not. I have tried deleting and readding the shortcuts, restarting Safari, restarting my iPad, and restoring from a back up. None of these have worked though. Is there something I am doing wrong? A setting that needs to be changed? A new way of adding shortcuts from Safari? I am in charge of the iPads for my work and I cannot get any of them to have pictures for the thumbnail instead of the awful ugly white square with lines (7 total iPad2s having the same problem). Please help! Thank you!
- Danielle

I actually fixed it now, don't worry, I just followed this video: http://www.youtube.com/watch?v=NKFFFe0r-T4

FireFox no longer displays embedded Youtube videos in WordPress blogs - Even the Youtube videos no longer display on the YouTube website!

Since yesterday FireFox no longer displays embedded Youtube videos in my WordPress blog - Even the Youtube videos no longer display on the YouTube.com website!

Go here please, and post your concern. We are trying to show how widespread this issue is:
Youtube videos not playing on standalone Safari browser iOS 8

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

My external drive is no longer displaying on my desktop

My external drive is no longer displaying on my desktop - Any suggestions on how to solve?
Thanks ;-)

Finder -> Preferences -> General -> Show these items on desktop -> External disks

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. How can I go back to attached images?

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.

Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom

My artwork no longer displays correctly after updating to iTunes 10.5.

With the most recent iTunes update, the artwork is no longer displayed properly. The songs on my hard drive display fine in iTunes. However, the artwork for songs on my iPod do not display in iTunes (I have limited space on my computer's hard drive, so when I manually add songs to my iPod, I delete them from my hard drive, therefore the songs on my drive and on my iPod are different). Thankfully, the artwork does display properly on the iPod itself. So it is not a corrupted artwork issue. When I am playing a song from my iPod through iTunes, it WILL show the artwork, but ONLY if the playing song is highlighted. Once I highlight another song, the artwork display window goes blank. This is regardless of whether the artwork window is set to "Now Playing" or "Selected Item." Also, if I change the window setting to "Now Playing" and I highlight a song other than the one playing, the window automatically reverts itself back to "Selected Item" and again no longer displays the artwork (unless I go back and highlight the currently playing track). Additionally, when adding artwork through the "Get Info" display for groups of songs, it will not display the artwork in the "Get Info" box after I have added it to the file(s) as it used to do prior to updating the software. This is true for songs both on the iPod and on my hard drive. The artwork is indeed being added, because when I click "ok" and then play (and highlight) the song, the new artwork displays. This is really frustrating! (I should note that I tend not to use "automatically download artwork" because most of the music I listen to is quite obscure and often does not have artwork available by iTunes without me adding it myself).

PLZ FIX THIS APPLE!! WE, YOUR CUSTOMERS LIKED IT BETTER THE OLD WAY!

ICal no longer displays caldav calendar but it's still there...

I find myself to have a strange problem... iCal no longer display a caldav calendar (which is my work exchange calendar via davmail app). But, it still appears to be there. In iTunes it is still listed in the calendars which can be synchronized with my iPhone. In fact, it is still synchronizing with my iPhone and up to date. If I add a new identical caldav calender in iCal, iCal only displays one calendar, as if there are no more, but in iTunes then two identical calendars are listed and on my iPhone all events are displayed double...
Any suggestion to get my calendar displayed in iCal again, or alternatively, how to remove the hidden agenda from the system so that I can resetup the calendar? By the way, I also have an MobileMe calendar running.
I look forward to receiving some hints as I am not yet able to solve this one.
Cheers!

Problem solved by myself Rebuild the calendar database by exporting the ical archive and then importing it. After that the hidden agenda was gone in Itunes. After a fresh set up of the caldav calendar in iCal it was back in iCal and iTunes. The mysterious ghost agenda is gone. Hope that this explanation may help someone else in the future.

My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

my macbook pro started acting strange after a safari reset.
the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
the mouse also gets 'stuck' in logic precipitating force quits.
i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
what shoud i do?

You don't say which year you have, however...
...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
Good luck,
Clinton

My Safari 6.0.1 no longer displays pictures

Similar Messages

Maybe you are looking for