My Safari doesn't work properly after installing Lion.  Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac.  My Safari doesn't work properly anymore.  Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall?  Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

Similar Messages

  • Lancom advanced client doesn't work/start after installing Lion

    After installing the Lion update, Lancom advanced VPN client doesn't respond anymore. The icon jumps but no further reaction. This is not funny at all because I need this tool for my business..... What can i do?

    Problem solved! After re-installing the Lancom VPN advanced client and restart of the iMac, it is working fine!

  • My Mail is not working properly after installing Lion

    I just installed Lion and my mail is not working.  It keeps asking me for the password and says it can not go online.  All my mail folders have disapeard and with them my saved emails!  Also the Back to Mac is not able to take my password either.

    Ouch...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Safari doesn't work properly after software update

    After I've updated my MacBook Pro with the latest software I can't go to most of the websites, I want to visit. It just doesn't load 100%, sometimes I can't see anything but a white page, and sometimes I'm only allowed to see 50% of the page. Why is that? It seriously kills me! Please help. xx

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    HI ..
    The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
    Starrtup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
    Please read >  OS X Recovery

  • Safari doesn't work properly with Ebay

    Safari doesn't work properly when listing items on Ebay. Fix it.

    Hi Occo
    I would rather Apple updates Safari
    Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
    this IS NOT A EBAY PROBLEM
    Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
    id rather apple fixed their software
    Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
    Im sure there would be similiar sites that arent compatible with safari
    I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
    So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
    Cheers and Good Luck

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Safari doesn't work properly

    Safari doesn't work properly. See screenshots
    0— what version
    1 – Scaling doesn't work as it should and as it worked before
    2 – inspector became unusefull in some manners and few weeks there is now way but use alternative browser to work
    BTW some controls on websites (eg SHOPIFY), based on JS doesnt work properly.
    To solve a lot of problems now as never before I use chrome.
    That's very very sad.

    You coulds always get Google Chrome- Its free!

  • I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?

    I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?

    Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.

  • I own two i macs. I bought and installed Lion on one computer. How can I install Lion on the other computer without additional charge?

    I own two I macs. I bought and installed Lion on one computer. How can I install Lion on the other compute without additional charge?

    If it's the same email address Apple registration on both, use the 2nd computer and go to the App Store and find Lion. If different, use the second computer but log in to the App store with the address you used on the first go round. The buy button should instead say install. Then go through the same process again.

  • Stream video doesn't work properly  after update to OS Mavericks

    after update to OS Mavericks stream video doesn,t work properly!!!  doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • Finder doesn't work properly after waking up from sleep?

    I have a brand new MacBook Pro with Lion installed on it. It travels back and forth from home to work with me, and at work I plug it in to an Apple Display. When I leave work, I put the laptop to sleep and take it home. At home, when it wakes up from sleep, the finder does not work properly. Often, I cannot see any finder windows, and mission control does not show my various desktops, and only shows open applications. I have already tried throwing away the com.apple.finder.plist file, and it did not help.
    Any suggestions are appreciated.

    Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
    Hope that helps...
    D.

  • GPS location doesn't work properly after shift WIFI device to new office

    GPS worked well before my office moves to new location. This month, WIFI and other network devices were moved to a new location because of office relocation, but GPS location on google maps and other apps still display as before, even I turn off the WIFI. Only if I go out the office, the GPS works properly.

    Means that the office is so heavily shielded that GPS signals are not getting in AND the WiFi access points are not in Apple's database. Do you have cellular data enabled? That's a third way these phones try to guesstimate position based on celltower signal strength.
    But if you're in a high security facility, none of the above will work. That would be the way it is designed.

  • Mac Powerbook with HP 5510 printer.  Scanner doesn't work since I installed Lion

    Mac Powerbook with Lion.  Scanner doesn't work since I installed Lion

    What kind of computer is it? Powerbooks can't run Lion. MacBook perhaps?
    With Lion, all scanning is performed through Preview. Use Preview.

  • HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

    After installed ios 7
    photos not able to see fully
    audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
    get strucks while playing games

    This board is full of people that are update crazy...
    even when they have perfectly good working systems.
    i know i thought well it's just a security update not a major update.
    Best advice... whenever updating the OS, unplug all
    firewire devices.
    will take note of that from now on.
    Was this auto-update? Try downloading the file and
    running the update again with all firewire devices
    unplugged.
    While the 828 is disconnected perform the factory
    reset
    again.
    Disconnect the firewire cable from the 828mkII
    -Press the Setup knob
    -Turn the Setup knob all the way to the right
    -Press the Select knob
    -Press the Value knob
    -Power off the interface and plug the firewire cable
    back
    in
    -Power the interface back on
    i have the original 828 not mark 2, so no reset i know of, just power on off.
    After the Mac updates... reboot and plugin the 828,
    see if that doesn't get you going.
    pancenter-
    cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Maybe you are looking for