My safari has been stop loading after updating my mac to 10.6.8!what should I do?!

my safari stoped working!so help me!:(

Presumably you updated Safari as well?
If your Safari won't open, one or more of the following procedures should fix it:
1. Go to Home/Library/Safari/ folder and remove the following two files:
history.plist
lastsession.plist
(Safari may not load properly If these two files are corrupted.)
and also go to Home/Library/Preferences and delete the file com.apple.Safari.plist
2. Go to Home/Library/Caches/Metadata/Safari/ and remove the [i]contents[/i] of that folder.
(These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
(Again, faults in stored cookies may interfere with Safari's launch.)
4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
Also look in Library/Input Managers where other third party add-ons may lurk. If you find a SIMBL folder, please note that some SIMBLE.bundles may require updating or possibly removal. More information on third party add-ons here:
http://support.apple.com/kb/TS3230?viewlocale=en_US
Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.
Note also that Safari does not accept any third party tool bars not supplied as part of authorised extension. If you have installed any of these, delete them, or post back for instructions on how to do so.

Similar Messages

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Hello I am trying to find my ipod touch I have lost it or it has been stolen I am unable to find the serial number so what should I do?

hello I am trying to find my ipod touch I have lost it or it has been stolen I am unable to find the serial number so what should I do?

Go to iTunes>Preferences>Devices and hover the mouse pointer over the iPod backup and the SN will appear. Alsosee:
iPod: How to find the serial number

Help! Aspyr Games Not Loading After Updating To Mac OS X 10.4.11

I can't seem to get my Sims 2 game to load after installing the latest update. It will bounce once in the dock then disappear.
I called Aspyr and they said it was a problem with Apple's update, not their game(s) or company.
I was told to see if I could update to 10.5.5 and that this should fix things. How would I do that, and first of all, would that be a good idea? Is it even possible? I'm (clearly) running Tiger.
I'm very confused because I haven't been able to connect to the internet for about a month and finally installed the Apple updates and then I started having all these problems. I'm not sure what to do!
Thanks in advance for your help!
Message was edited by: papersky06

Run Disk Utility and repair permissions on your drive. If that doesn't work, follow the more extensive instructions for repairing your drive.
As you have observed, you are running Tiger and the company told you to upgrade to Leopard, which I agree isn't very helpful unless you want to upgrade (is it worth it?).
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
[Post by japamac about using fsk|http://discussions.apple.com/thread.jspa?threadID=1649143&tstart=0]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."

Tried to restore and update iPhone 3GS, has been in the "verifying restore with apple" stage for an hour. what should i doo?

okay, so lately my iPhone 3GS has been telling me i have no service what so ever for the past two days. But today when i was on the bus going home from school, i had perfect service and everything until i got close to my house (to clarify, i live somewhat far out from the center of town, and my school is right in the middle of town.. didnt know if that would affect anything). So then i asked my Dad about it and he reccomended restoring and updating my phone to see if it helped because im a couple updates behind. So i plugged it in, backed it up, and began to restore and update it. All was well until it got to the "verifying the restore with apple" stage. I was watching the rose bowl and not paying attention while it was on, but remembered that it started that stage at the beginning of the game. Now the game just ended 5 or 10 minutes ago and lasted a goood hour, hour an a half, and its still verifying!! i dont know what to do... HELP!

Did you check the security software settings? iTunes has to be able to contact Apple during the update process: iTunes for Windows: Troubleshooting security software issues

My safari has been stoped working after I had updated it to the latest version!what should I do?!

my saafari hasn't been working for 2 month:(

If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069
Safari 5.0.6 for Leopard (and Snow Leopard) can be downloaded from here:
http://support.apple.com/kb/DL1070
Make sure you download the correct version for your system.
Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now Tiger uses Safari 4.1.3 and Leopard uses Safari 5.0.5, as does Snow Leopard albeit a different version. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
Hard Disk/Library/InputManagers
Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

SOLVED Spanish keyboard stopped loading after update, upgrade

I am trying archlinux. The newest stable version with updates, and kde 4.3.2. Brilliant it is. However, after a few weeks of perfect use today I booted up and found, I think, US keyboard instead of Spanish one. Apart from a standard update and upgrade, I do not think I have changed anything.
I tried system settings and chose regional and language/keyboard layout. It gives me an error message only. Cannot cut and paste but it sayd something like> Cannot load /usr/lib/kde4/kcm_keyboard_layout.so (libxklavier.so.12. Cannot open shared object file. No such file or directory) Cannot load library.
I check for first file and it shows it is there>
[root@antec etc]# find / -name kcm_keyboard*
/usr/lib/kde4/kcm_keyboard.so
/usr/lib/kde4/kcm_keyboard_layout.so
/usr/share/kde4/services/kcm_keyboard.desktop
So is second file but see it is number 15 not number 12 as said in error message above>
[root@antec etc]# find / -name libxklav*
/usr/lib/pkgconfig/libxklavier.pc
/usr/lib/libxklavier.so.15
/usr/lib/libxklavier.so
/usr/lib/libxklavier.so.15.0.0
/usr/share/gtk-doc/html/libxklavier
/usr/share/gtk-doc/html/libxklavier/libxklavier.devhelp
/usr/share/gtk-doc/html/libxklavier/libxklavier.devhelp2
/usr/share/gtk-doc/html/libxklavier/libxklavier-xklavier.html
/usr/include/libxklavier
/var/lib/pacman/local/libxklavier-4.0-1
/var/lib/pacman/sync/extra/libxklavier-4.0-1
/var/cache/pacman/pkg/libxklavier-3.9-2-i686.pkg.tar.gz
/var/cache/pacman/pkg/libxklavier-4.0-1-i686.pkg.tar.gz
[root@antec etc]#
I check in rc.conf and the es keyboard is selected. I search in the archlinux wiki and in google and also here but do not find help.
EDIT> now also found that Printer Config in Settings also shows similar error messages about orphan modules, old third party models etc.
Can you help please....
Last edited by arjay (2009-10-31 11:49:10)

Very kind of you to reply.
The results of your first request is>
linux-gate.so.1 => (0xb77cd000)
libxklavier.so.12 => not found
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0xb7745000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb7629000)
libXi.so.6 => /usr/lib/libXi.so.6 (0xb7620000)
libkdeui.so.5 => /usr/lib/libkdeui.so.5 (0xb7244000)
libkdecore.so.5 => /usr/lib/libkdecore.so.5 (0xb6fcb000)
libQtCore.so.4 => /usr/lib/libQtCore.so.4 (0xb6d9c000)
libQtGui.so.4 => /usr/lib/libQtGui.so.4 (0xb640b000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb6319000)
libc.so.6 => /lib/libc.so.6 (0xb61d3000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb61b4000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xb6102000)
libpcre.so.0 => /lib/libpcre.so.0 (0xb60d1000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb60b8000)
libdl.so.2 => /lib/libdl.so.2 (0xb60b4000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb60a4000)
libQtSvg.so.4 => /usr/lib/libQtSvg.so.4 (0xb6051000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb6038000)
libSM.so.6 => /usr/lib/libSM.so.6 (0xb6030000)
libICE.so.6 => /usr/lib/libICE.so.6 (0xb6019000)
libQtXml.so.4 => /usr/lib/libQtXml.so.4 (0xb5fd6000)
libXtst.so.6 => /usr/lib/libXtst.so.6 (0xb5fd0000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0xb5fc7000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb5fc2000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb5fb9000)
libQtDBus.so.4 => /usr/lib/libQtDBus.so.4 (0xb5f49000)
libm.so.6 => /lib/libm.so.6 (0xb5f23000)
libQtNetwork.so.4 => /usr/lib/libQtNetwork.so.4 (0xb5e14000)
libz.so.1 => /usr/lib/libz.so.1 (0xb5e00000)
libbz2.so.1.0 => /lib/libbz2.so.1.0 (0xb5df0000)
liblzma.so.0 => /usr/lib/liblzma.so.0 (0xb5dcf000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0xb5dcb000)
librt.so.1 => /lib/librt.so.1 (0xb5dc1000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb5d9b000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb5d16000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb5ceb000)
/lib/ld-linux.so.2 (0xb77ce000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb5ce8000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb5ce2000)
libuuid.so.1 => /lib/libuuid.so.1 (0xb5cde000)
libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0xb5c98000)
libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0xb5b46000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb5b1f000)
[richard@antec ~]$
And the second>
[root@antec richard]# ls -l /usr/lib/libxklavier.so*
lrwxrwxrwx 1 root root 21 2009-08-23 22:28 /usr/lib/libxklavier.so -> libxklavier.so.15.0.0
lrwxrwxrwx 1 root root 21 2009-08-23 22:28 /usr/lib/libxklavier.so.15 -> libxklavier.so.15.0.0
-rwxr-xr-x 1 root root 115321 2009-08-23 22:28 /usr/lib/libxklavier.so.15.0.0
[root@antec richard]#
As you suspected, libxklavier.so.15 is there, but not so.12 which is presumably what kde is looking for_
The question is, how do I correct this
Richard
BTW thanks for the tip about locate. I used to use this ages ago but got out of the habit. Not sure why. Maybe the distro I had back then did not have it by default and I needed it quickly one day. It could not be that I was too lazy to install it I am sure

My iphone 5 has been rebooting randomly after updating to ios 7.1.1 and the battery bar now stays the same.this has been occuring all the time even when batery level is high.it also happens when it is also charging.

Please help me. It is really getting irritating

Hi AimanBms,
If you are having issues with your iPhone restarting unexpectedly, you may find the following article helpful:
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Regards,
- Brenden

Ipod 5 has been disabled and i have not synced but know the password. what should i do?

Ok so my ipod was disabled to itunes and I havent synced my ipod to our new computer so i cant put my ipod into recovery mode because i dont have a back up and i don't want to lose anything. I know the password and thats why it is frustrating because all the things i have read say that i have to restart my ipod to factory default. Can apple help me or somthing? i really dont want to lose everything! Any id

You have to restore and thus erase the iPod. It is a security feature.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Safari has been deleted and cannot reinstall

Hi peeps,
Safari has been removed from my friends I-Mac (an inspiring son thinking he knew what he was doing and loading shi**y firefox) , I have gone through lengthy procedures of trying to reinstall the programme, The version she works off is 10.4.11 i know this seems pretty outdated, but, it work for her....
Any way I have loaded the instation disc and went through the process of opening up just the Bundle so you can reinstall one programme if need be, bizarrely it does not show in the list...(very strange) Subsquently i have tried to down load various version through the Apple downloads certain messages come up saying you need this particular version of safari or that you need the other version.... when trying to download certain version it states that safari is already installed - But, i have checked her hard-drive, done searches in finder, but nothing is showing..... Can anyone help me to sort this problem out
Many thanks
Paul

Hi Linc,
I haven't tried that yet in all fairness, but that will wipe everything of Jo's system, as she does not have an external hard-drive, as she keeps all her files on her desk top, would that affect any of her notes....?
Also if an archive and install is done, this will delete her son's account off the system also wont it.... (which is maybe not a bad idea as it's him that has caused this problem...hahahha)
Thank you also
Paul

10.1.3.4 - db Adapter connection factory has been stopped.

I created a process which had a custom sql operation to read data from a db table. It was working fine, but now I am getting a weird error
file:/apps/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_SiebelRMAShipmentIn_bpel_1.0_d9f7e6fe5e3f4daf12e5a856c48d4ff9.tmp/getShipmentRecords.wsdl [ getShipmentRecords_ptt::getShipmentRecords(getShipmentRecordsInput_msg,getShipmentRecordsOutputCollection) ] - WSIF JCA Execute of operation 'getShipmentRecords' failed due to: Pure SQL Exception. Pure SQL Execute of select a.row_id, a.asset_num, a.SERIAL_NUM, o.ORDER_NUM, oi.LN_NUM from s_asset a, s_order_item oi, s_order o where a.REF_NUMBER_2 = o.ORDER_NUM and oi.X_SHIP_ASSET_ID is null and oi.STATUS_CD <> 'Closed' and oi.ORDER_ID = o.row_id and a.X_ORDER_LN_NUM = oi.LN_NUM and a.ship_dt >= sysdate - 10 and a.X_ORDER_LN_NUM >= 1 failed. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.Error Code: 0. [Caused by: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.] ; nested exception is: ORABPEL-11633 Pure SQL Exception. Pure SQL Execute of select a.row_id, a.asset_num, a.SERIAL_NUM, o.ORDER_NUM, oi.LN_NUM from s_asset a, s_order_item oi, s_order o where a.REF_NUMBER_2 = o.ORDER_NUM and oi.X_SHIP_ASSET_ID is null and oi.STATUS_CD <> 'Closed' and oi.ORDER_ID = o.row_id and a.X_ORDER_LN_NUM = oi.LN_NUM and a.ship_dt >= sysdate - 10 and a.X_ORDER_LN_NUM >= 1 failed. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.Error Code: 0. [Caused by: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.] The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead. </summary>
<detail>Internal Exception: java.sql.SQLException: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.Error Code: 0</detail>
I don't get it, whats happening ? why does the adapter care what i am running inside a custom sql step. all it is supposed to do is execute the sql and return the values. Why is it forcing me to rewrite the operation which was working before ?

well as always...nothing works like restart of the server. Issue resolved.

InDesign won't load after update to Yosemite 10.10.3

I can't get InDesign CC 2014 to load after updating my mac to Yosemite 10.10.3
I have uninstalled and installed InDesign twice now, restarted the computer several times, emptied the trash etc. Nothing helps.

Any error rmessage?
Have you tried repairing permissions?
You might want to try this (substituting version 10 where it says version 9): Cant launch new inDesign CC | Adobe Community

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

[svn] 650: Prevent potential NPEs from wait' ed long poll requests whose threads exit after the underlying endpoint has been stopped by a separate thread .

Revision: 650
Author: [email protected]
Date: 2008-02-25 16:55:13 -0800 (Mon, 25 Feb 2008)
Log Message:
Prevent potential NPEs from wait'ed long poll requests whose threads exit after the underlying endpoint has been stopped by a separate thread.
Bugs: BLZ-65 - Long-polling clients trigger NPE on server shutdown.
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-65
Modified Paths:
blazeds/trunk/modules/core/src/java/flex/messaging/endpoints/BasePollingHTTPEndpoint.java

Hi,
Looks like you're using BDB, not BDB JE, and this is the BDB JE forum. Could you please repost here?:
Berkeley DB
Thanks,
mark

My safari has been stop loading after updating my mac to 10.6.8!what should I do?!

Similar Messages

Maybe you are looking for